Belkin wireless G+ usb adapter

1. You have to have access to a wireless router to be able to connect.You also have to be allowed to connect.
2. A wireless adapter will show all computers in the area wirelessy but if you don't have a key to access you will not be able to connect.

I dont think belkin has a stable driver for win.7 at this time. I have a belkin n router with a belkin adapter and had no luck.
Some people have had some success using a Vista driver.
You could go to www.bioticaindia.com and download a win 7 driver there. They show a 48% success rate.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/robert_33deecd2f8e91168

If you ar eusing vista go to the small wireless indicator on your toolbar..dble click it then click connect to network...click on your connecion and it wil as you if you want to save it...probably similiar to XP

All wireless adapters use the same radio channels so your adapter will work with your router. (If that wasn't the case, it wouldn't be so easy to connect to networks with a laptop with built-in wireless.)

You can not use the Belkin Wireless G USB Adapter for the XBox 360. You must buy a USB Wifi adapter that supports the Xbox 360. (See Microsoft's USB WiFi Network Adapter)

Hi Emma,
Try these first:

change channels to 1-6-or 11. Make sure you change all of your wireless computers.

check is to make sure you are NOT using "IEEE 802.1x authentication for this network."

You can find at setting under "Wireless Network Connection Properties" and then under "Authentication" tab of your network properties.

This particular authentication method is periodically logging you off the network and re-authenticating.

Check the adapter in device manager to make sure that windows is not shutting the adapter down to save power.

Cordless phones and wireless ethernet cards use overlapping frequencies.As a test, you can unplug the AC cords from all the cordless phones in the area and see if it helps.
Please let me know how you make out.
thanks

Check and see if this setup guide matches your device?

Setup Guide

If it does we can probably search for more information.

Did you configure your router using WEP, WPA security (using passphrases) on your router?
Did you enable MAC address checking on your router?

You have to setup a password on your wireless network. This way you will only be logged on to your owns. No one else will be able to enter you network.
Thanks

Hi, sorry to hear you also having problems with the Belkin. I just bought exactly the same one and have just replaced it with a Netgear one as it didn`t work very well! Dont think the software is too good with Belkin but the encryption I used was TKIP (Belkin did work sometimes!) I also had a network key. sorry I cant help more-melanie