Question about Teac PLD2000 System

5 Answers

Unlock code TEAC PL-D2100

Hi There, PLEASE help me, I'm urgently looking for the unlock code for my TEAC PL-D2100 DVD...............
email me on calbertyn@fnb.co.za

THANK YOU!!!! Can you please help me on how to unlock my DVD player Teac PL-D2100.
I have never tried to unlock it before. I tried to play the DVD from the U.S.and the message "Wrong region" appeared.
Thank you
Alex

Posted by on

×

5 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,071 Answers

Just click below
Post region code/hack comment
Using the remote control open tray
Press 0, 0, 0
Region selection will appear.
Select 0 for no region (ie. all regions)
Press pause button on remote control.
Turn Unit off and back on again.
It should now be region free.
Test your disk.

hope this may help;

Regards,
VOTIT

Posted on Jul 31, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 667 Answers

You can download the service manual at the following link, tells how to do it snd I know it works:
http://www.user-manuals.com/advanced_search_result.php?keywords=teac+pld+2000&x=11&y=14

You can also copy the DVDs using any number of software that when you copy it you can specify make region free.

Hope this helps.

Posted on Jul 31, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,427 Answers

Currently there isnt any hacks aviable for this player.
You may only play dvd's the player was designed for or multi regional dvds. ..

i do have the hack for the PL-2000 which may work. you can have a go at it but if it fails you will need to wait until one for the 2100 is released.

1. "POWER ON"

2. Open DVD tray

3. Using the remote control, press and hold "RETURN" button and press "DISPLAY" button. The lower left of the TV screen will show a line of alpha & numeric letters and numbers.

4. Keep pressing "RETURN" button and tap "DISPLAY" button until the last digit on the right changes to "0".

5. Release "RETURN" button and press "ANGLE" button on the remote control.

DVD Player is now "CODE FREE!"

Good luck and i hope it works, else you may need to wait a while.

Posted on Jul 31, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 250 Answers

There is no region free hack for that player.

Posted on Jul 21, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 1,894 Answers

What region is it playing now and where from the unit was bought??

please give the inputs sir. we will be happy to help you

Posted on Jul 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I relocated to Brisbane , Australia from Durban , South Africa with my Teac PL-D2100 (Euro 2) and it does not play DVDs here. Wrong Region displayed. The Teac system was bought in Durban, RSA. I cannot...


DVD manufacturers are only allowed by Hollywood to let their players play DVD's from the country that the unit is purchased from. To get around this some hackers have broken into the operating systems of the player and change the system so that it will play DVD's from any countries. Nor all players have these codes, and not all players of one model number will have the same code work on them.

You can try the following steps out and they might change your unit so that it will play any DVD. It's important that you know if you do try the process and it does change the player your warranty will be voided. Here are the steps:

1. "POWER ON"

2. Open DVD tray.

3. Using the remote control, press "VOLUME^" button.

4. Press the "AUDIO" button. Region Code 2 will be displayed on TV.

5. PRESS CURSOR UP/DOWN "V" button until Region Code Number on TV screen changes to "0".

6. Press "ENTER" button to store.

7. "POWER OFF" and then "POWER ON".

Mar 07, 2011 | Teac PLD2000 System

1 Answer

Unlock region code on Teac PL-D2100


TO UNLOCK THE REGION CODE ON THE PLD 2100 DO THE FOLLOWING:

  1. "POWER ON"
  2. OPEN THE DVD TRAY
  3. USING THE REMOTE CONTROL, PRESS AND HOLD "RETURN" BUTTON AND PRESS "CURSOR DOWN" "V" BUTTON.
  4. RELEASE "RETURN" BUTTON AND PRESS THE NUMBERS " 2 ; 3 ; 7 ; 9 ; 2 ; 2 ; 2 " IN SEQUENCE.
  5. PRESS CURSOR DOWN "V" BUTTON UNTIL "MAINTENANCE MODE" NUMBER ON TV SCREEN CHANGES TO "0"
  6. PRESS "ENTER" BUTTON TO STORE.
  7. "POWER OFF" THEN "POWER ON"
DVD Player is now REGION CODE FREE..........Enjoy the movie!

Jun 02, 2008 | Teac PLD2000 System

1 Answer

TEAC PL-D33200


Multizone code for Teac PL-D3200
Here is the procedure to unlock your Teac PL-D3200 to play all zones of DVD's.
Using your remote control:
1. Switch power on 2. Open the dvd tray (leave it open with no dvd in it) 3. Press "stop" 4. Press "734466" 5. Use cursor to scroll up or down until it says "Region 0" 6. Press "OK/Enter" 7. Switch power off 8. Switch power on
It will now play all region DVD's! :-) 

Jan 20, 2008 | JVC TH-S8 System

1 Answer

Unlock codes for TEAC PL-D2000


Comments:
To set Region code to 0 on a Teac PL-D2000 DVD System to enable play of any region
Ensure TV monitor is on so and set to display DVD.
1. Turn system completely off.
2. Turn on system.
3. Open tray.
4. Using remote press and hold the return button.
5. While holding the RETURN button, press and hold the DISPLAY button.
6. You will see something like this displayed on screen: VER 1006 TE 3210
7. Release DISPLAY and RETURN buttons simultaneously.
8. Press the ANGLE button. You will see WRITING REGION ID displayed.
You can now play DVDs from any region.

Dec 28, 2007 | Teac PLD2000 System

2 Answers

Unlock Code for Panasonic SA-HT880 DVD Player


pl tell what error it is showing on the screen

thank you
santosh

Dec 27, 2007 | Panasonic SC-HT520 System

2 Answers

Remote Codes


http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q=teac+remote+codes

any dvd player code will work fine.

good luck

smeags.

Dec 22, 2007 | Teac PLD2000 System

2 Answers

Hacking code for Teac PL-D3200


Multizone code for Teac PL-D3200
Here is the procedure to unlock your Teac PL-D3200 to play all zones of DVD's.
Using your remote control:
1. Switch power on 2. Open the dvd tray (leave it open with no dvd in it) 3. Press "stop" 4. Press "734466" 5. Use cursor to scroll up or down until it says "Region 0" 6. Press "OK/Enter" 7. Switch power off 8. Switch power on
It will now play all region DVD's! :-) 

Sep 16, 2007 | JVC TH-S8 System

2 Answers

My TEAC PL-D2100 home theatre system, is not showing all natural colors in display since yesterday.


the red rca jack of the component output on your dvd player or the red input on the Avr component input is not plugged in properly ( loose ) or the the component monitor out to the tv may be loose. there is also possablity of cable cut. check it with another component cable or interchange the red to green to find if the problem perssts ,... to ascertian weather it is the cable.. this info should solve your prob.

Jun 30, 2007 | Teac PLD-2200 System

2 Answers

PL-D2000 DVD Home theater System


Comments: To set Region code to 0 on a Teac PL-D2000 DVD System to enable play of any region Ensure TV monitor is on so and set to display DVD. 1. Turn system completely off. 2. Turn on system. 3. Open tray. 4. Using remote press and hold the return button. 5. While holding the RETURN button, press and hold the DISPLAY button. 6. You will see something like this displayed on screen: VER 1006 TE 3210 7. Release DISPLAY and RETURN buttons simultaneously. 8. Press the ANGLE button. You will see WRITING REGION ID displayed. You can now play DVDs from any region. 0

May 27, 2007 | Teac PLD2000 System

Not finding what you are looking for?
Teac PLD2000 System Logo

345 people viewed this question

Ask a Question

Usually answered in minutes!

Top Teac Home Theater Systems Experts

ray gallant

Level 3 Expert

36333 Answers

Jerry Kramer
Jerry Kramer

Level 3 Expert

3904 Answers

Audio Service Clinic...

Level 3 Expert

924 Answers

Are you a Teac Home Theater System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...