Question about Sony VAIO RB30C (VGCRB30) PC Desktop

2 Answers

Fatal execution engine error 0x7927f26e

I got this error message when a program that I loaded started to take over a couple of similar programs. I looked for uninstall, but the program didn't have it. So I went to add and remove, and the program was listed under another name. I removed three programs that were under office manager 2007, I did not have these before I loaded the office program. After that, I kept getting the Fatal execution engine error 0x7927f26e Now I can't click on pictures or edit them, anything to do with pictures I can't do. What can I do to get this taken care of. Mike Ludwig 502-413-6891
I am in Michigan for a time, so I can't answer my phone, but the computer is still under warranty mjludwig@insightbb.com

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 156 Answers

Download and use the Windows Installer Clean Up Utility to uninstall .Net Framework and any Hot fixes for it.

http://download.microsoft.com/downlo...BD/msicuu2.exe

Then try re-installing .Net Framework.. You need at least 1.1:
http://www.microsoft.com/downloads/details.aspx?FamilyId=262D25E3-F589-4842-8157-034D1E7CF3A3&displaylang=en
and you may also want to install 2.0:
http://www.microsoft.com/downloads/details.aspx?FamilyID=0856EACB-4362-4B0D-8EDD-AAB15C5E04F5&displ

Regards,
Sandeep Singh.

Posted on Jul 21, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Do a repair setup from the windows cd

Posted on Jul 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How ifix a fatal error


Below is a listing of the more commonly experienced processor exceptions ranging from 00 to 0F.

00 = Divide Fault
Occurs if division by zero is attempted or if the result of the operation does not fit in the destination operand.

02=NMI interrupt
Interrupt 2 is reserved for the hardware Non-Maskable-Interrupt condition. No exceptions trap through interrupt 2.

04=Overflow trap
Occurs after an INTRO instruction has executed and the OF bit is set to 1.

05=Bounds Check fault
The array Index is out of range

06=Invalid Opcode fault
This error can be caused by one of the below conditions.

  1. Processor attempting to decode a bit pattern that does not correspond to any legal computer instruction.
  2. Processor attempts to execute an instruction that contains invalid operands.
  3. Processor attempts to execute a protected-mode instruction while running in virtual 8086 mode.
  4. Processor attempts to execute a LOCK prefix with an instruction that cannot be locked.

07=Copressor not available fault.
This error can occur if no math coprocessor is present. This error can also occur when the math coprocessor is used and a task switch is executed.

08=Double Fault.
This error occurs when processing an exception triggers a second exception.

09(OD)=Copressor Segment Overrun.
Floating point operand is outside the segment.

10(0Ah/0A)=Invalid Task State Segment Fault
Can be caused by a number of possibilities as Task State Segment contains a number of descriptors.

11(0Bh)=Not Present Fault
The Not Present interrupt allows the operating system to implement virtual memory through the segmentation mechanism. 0B fault occurs when this segment is not available.

12(0Ch)=Stack Fault
Occurs when instruction refers to memory beyond the limit of the stack segment.

13(Odh)=General Protection Fault
Caused by any condition that is not covered by any of the other processor exceptions. The exception indicates that this program has been corrupted in memory generally resulting in the immediate termination of the program.

14(Oeh)=Page Fault
Occurs when a paging protection rule is violated (when the retrieve fails, data retrieved is invalid or the code that issued the fault broke the protection rule for the processor).

16(10h)=Coprocessor error fault
Occurs when an unmasked floating-point exception has signaled a previous instruction.

17(11h)=Alignment Check Fault
Only used on 80486 computers. Caused when code executing at ring privilege 3 attempts to access a word operand that is not divisible by four, or a long real or temp real whose address is not divisible by eight.



Find out the reason of Fatal Error if that is due to Software related then go in safe mode and uninstall the software recently installed or udate them/patch them. or if the same is related to hardware then unplug the recently added hardware,


please vote



Aug 21, 2011 | PC Desktops

1 Answer

Error R6002 floating point not loaded


try using windows 2000 or windows xp sp2 compatablity mode for the executable file that causes the error

Jun 04, 2010 | Sony VAIO® VGCLS1 PC Desktop

2 Answers

3 software packages won't install or run.


TRY,, DRIVER MAX free program i always had problems with driver detevtive

May 22, 2009 | HP Pavilion m7480n (882780389410) PC...

1 Answer

Error message


This error code is very possible from Nero CD/DVD burning software. you might want to uninstall it and reinstall it.

May 06, 2009 | PC Desktops

1 Answer

Error Message 'F:\ setup.exe is not a valid win32 application'


This issue can be caused by any of the below possibilities.
  1. File is corrupt, bad, or missing.
  2. File is not designed for your version of Windows.
  3. File is a virus, worm, or other malware file.
  4. Hardware incompatibility.
Answer: File is corrupt, bad, or missing
If the file or program you're attempting to run is corrupt or missing, Windows will be unable to execute the file properly and sometimes generate this error message.
Download files
If you downloaded this file and verified it is complete and compatible with your version of Windows, delete the file and try downloading and running it again. It's possible during the download that the file became corrupted.
Finally, if the second download does not work, try downloading the file from a different webpage. It is possible that the person or company maintaining the website mistakenly uploaded a corrupt version of the file you're attempting download.
Installing a program from a CD or other disk
If you're attempting to install a program and are getting this error, verify that the CD is clean. If the CD is dirty or bad, you could get this error during the install and/or get this error after the program has been installed because it was not copied properly onto the computer.
  • Additional information about cleaning a CD can be found on our cleaning page.
Running a program from the computer
If you're running the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer you may get this error.
If the hard disk drive is corrupted or bad it can also cause working programs to fail either because not all the data can be read from the hard disk drive or because the program has become corrupted while on the drive. Run scandisk and defrag on the hard disk drive to check for any potential errors.
Long file name issue
Make sure the program or file you're attempting to run does not contain the same name as the long file name directory it is contained in. For example, executing a file named "program" in the "program files" directory can cause errors in some versions of Windows.
Additionally, if you're attempting to install a program and after the install the program does not work, you may also want to try installing the program in a different directory.
Bad file
Any file can be changed or renamed to be a .exe file. If you're downloading the file, make sure the file is supposed to be a .exe file and that it's not being changed. If you're attempting to create a .exe, file make sure you're compiling the file for Windows and never just rename a file to a .exe file. For example, renaming a .bat file to a .exe file will not make the file an executable file. For a file to become an executable file it needs to either be compiled or converted through a software program designed to convert the file.
File is not designed for your version of Windows
If you're trying to run a program that is not designed for your version of Windows you may get this error. Although many older programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will work.
  • If the program is an older MS-DOS program or early Windows program you may get this error.
  • If the program is designed for a 64-bit version of Windows and you're running it in a 32-bit version of Windows, it will not work and generate this error.

Mar 18, 2009 | PC Desktops

1 Answer

Try to start HP Image Zone, get error. Fata Exception Engine Error (0x7927f26e) Click Ok and the get an error Application has generated an exception that could not be handled. Process id = 0xf4c (3916),...


Hi sjt916,

Unfortunately the only way to fix this is to reinstall the program. Somehow the installation has become corrupt and is conflicting with a windows operation producing an error.

Please tell me how it goes.

Nov 13, 2008 | HP PC Desktops

1 Answer

I PURCHASED MEMORY AND HARD DRIVE UP-GRADES FROM GATEWAY. I WAS TOLD THAT THIS WILL CORRECT MY FATAL ENGINE ERROR PROBLEM AT START-UP. THEY SENT IT WITH-OUT INSTALLATION INSTRUCTIONS.


i dont think its a problem with the hdd and the memory,it could only be problem with startup programs on your computer that is corupted,maybe you can provided the complete error message,maybe i can help you out

Jul 17, 2008 | Gateway PC Desktops

1 Answer

Windows fails to execute programs


You are infected. If you were to run a free program like Dr. Web or Malware bytes you would see the infection. Unless you can reboot the machine eliminating the registry or tag your harddrive to another machine, then I would suggest you take it to somebody. I'm in Scottsdale, AZ or Walkerton, IN.

Apr 28, 2008 | HP Pavilion 762c (P8628A#ABA) PC Desktop

1 Answer

Emachine will not start up it says fatal error regeristery not updated, then turns off


Linux and UNIX ld command help -z defs, Force a fatal error if any undefined symbols remain at the end of the ... which are marked lazyload will not be loaded at initial process startup


E-mail CHID: 5369 Unfortunately we were unable to find anything about the Fatal Exception error message you are encountering we suggest you go through the basic fatal.

Good Luck, Please dont for get to Vote/Thank You.

Dec 19, 2007 | E-Machines eMachines Desktop PC

Not finding what you are looking for?
Sony VAIO RB30C (VGCRB30) PC Desktop Logo

653 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

508 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you a Sony PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...