Question about HP DeskJet F380 All-In-One Printer

1 Answer

My printer is not responding when I switch it on.

Last week my printer would not switch on, then a couple of days later I noticed it had itself on at some point and it worked fine until last night when once again it would not switch on. I have checked both ends of both leads and they are secure. Can you help please?

Posted by on

  • 1 more comment 
  • kalyan_rka Jul 26, 2008

    My hp deskjet F380 all in one printer is simply not responding when i am in great need of a print out of a document.What should I do,the supplier refuses to do anything as the one year warranty period has just about expired! Pl mail me a solution in my e-mail address kalyan_rka @yahoo.com at the earliest.

  • Anonymous Aug 03, 2008

    my printer is not printing

  • stevensjohn_ Dec 01, 2008

    My Deskjet F380 wont swithch on. Have checked fuse and tried in a different point.



    I can only think it is the lead with the transformer. Or could it be somrthing else?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hello

I just held the button down for a lot longer. Have not switched it off again though!.

Joan

Posted on Jul 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Camera shuts off when shutter button is pressed.


I'd try replacing the battery first. It is common for a low power battery to not allow the camera's computer to read what it is supposed to do correctly. If the new fully charged battery doesn't fix it, I'd then contact customer service.

Apr 29, 2015 | Canon PowerShot S2 IS Digital Camera

1 Answer

GE TV Model 35GT695 - Problem Turning TV ON


Sounds like a solder problem. Look over the circuit board real good ffor cracked solder joints especially near the flyback and your Horizontal output and regulator transisitors. Could also be a defective capacitor look for signs of bulging or leaking capacitors.

Jan 15, 2008 | Televison & Video

1 Answer

I have had my Epson R1900 since last July, and it has worked just fine for me up until a couple of months ago when it began printing with a very noticeable blue-green tint. I always use Epson 87 inks, and...


using your printer once a week makes your printer clog even if you use original cartridges i prefer using it once a day, if you dont have anything to print, just turn on your printer and it will automatically head cleaned its head

May 24, 2011 | Epson R1900 Printer

1 Answer

The blower for the A/C keeps going out. The first time this happend,, i thought the AC had gone out,, but then a couple days later it started blowing again. Last week, my battery went out and so i...


Hi, an intermittent blower can be caused by either the switch or the motor itself. To find which it is, try messing with the switch to see if it will misbehave. If not, then the next time it doesn't work, try hitting the motor. Unfortunately your blower is behind the glove box, but maybe you can just pull the glove box past its stops and reach back to hit the motor with your fist. It hitting it makes it start, the motor has a dead spot on the commutator and should be replaced. Please let me know if you have any questions, and thanks for using FixYa.

Apr 03, 2011 | 2001 Nissan Maxima

1 Answer

Rear window wiper works for a few days or weeks


Check the plug is completely plugged into the motor. Maybe a bad connection in the motor itself. Also check the switch, try wiggling it when turning on.

Mar 06, 2010 | 2003 Oldsmobile Silhouette

1 Answer

Malfunction indicator lited repeatedly


Probably is the throttle position sensor is bad. If you through several cycles and the computer does not see a problem then it will clear the codes until the problems exists again. That is why you see the light go out. You probably have a problem with the TPS.

Sep 14, 2009 | 2003 Honda CR-V

1 Answer

My copier does not turn on


Sounds like a bad on off switch, some times jiggle the switch to see if it comes on, if it flickers yes switch is bad. Could also be Power supply or possible even power cord...

Jul 07, 2008 | Canon PC-795 Copier

1 Answer

T.V. TURNING OFF AFTER ABOUT 5 MINUTES.


Go to Samsung.com for solution. There is a switch that just needs to be repositioned behind access door on rear. Fixed my HL-S5086W ok.

Feb 13, 2008 | Samsung HL-S5086W 50" HDTV

Not finding what you are looking for?
HP DeskJet F380 All-In-One Printer Logo

Related Topics:

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...