Question about Kenmore 67082 Electric Dryer

1 Answer

Kenmore Elite Oasis error code F41

My dryer is displaying code F41 - what does that mean????

Posted by on

  • 3 more comments 
  • dragana_meic Jan 11, 2009

    what is the solution of F41 problem @ Kenmore C6708?

  • jude105 Jan 31, 2009

    F41 error code

  • Anonymous Mar 23, 2009

    I put in a load to dry and the dryer will run for a while. I go back to check and the F41 is flashing. It takes several tries and different settings for me to get the drying done.

  • alfa72us May 05, 2009

    I have the same problem,
    Kenmore Elite Oasis error code F41

  • Anonymous Mar 25, 2014

    Will not start

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 261 Answers

I don't see this code often although I can steer you in a good direction, F41 to F47 is error codes for dual motor problems on oasis.

Posted on Sep 13, 2008

1 Suggested Answer

  • 212 Answers

SOURCE: MY DRYER IS DISPLAYING CODE F41-WHAT DOES THAT

check for tech sheet behind front panel

Posted on Jun 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Elite Oasis. What does the F-40 code mean?


F-40 is a communication error between the main board and the motor control unit, or it could be a bad inline fuse between the two in the wire harness on the l-1 side.

Oct 23, 2015 | Kenmore Elite Oasis 6808 Electric Dryer

1 Answer

What does the code C3 mean on my Asko Dryer


Asko electric dryer model T701 has timer-controlled drying in addition to the two automatic (thermostat-controlled) programs. Without electronic, there isn't possible display fault code.

Dado

Sep 26, 2014 | Asko T701 Electric Dryer

1 Answer

What do Error codes F04 and E03 mean?


The dryer is in need of service if a code beginning with an "F" appears in the display.
Alternating between F# and E#, the dryer control has detected a problem that requires service.
Call for service.

May 04, 2014 | Maytag Maxima EcoConserve Series MED6000XW

1 Answer

Kenmore Elite Oasis Electric Dryer - no power (PF code)


Press and hold the "Start" button to restart the dryer cycle if the "PF" (power failure) error code appears. This code often appears when a cycle is interrupted before it completes. You may also check the breaker or household fuse, and ensure the machine has not come unplugged.


Read more: How to Repair Kenmore Elite Oasis Dryer Error Codes ' eHow.com http://www.ehow.com/how_7703883_repair-oasis-dryer-error-codes.html#ixzz1u

May 12, 2012 | Kenmore Elite Oasis 6808 Electric Dryer

1 Answer

Dryer will not start display works, when i push the start button it just beeps and does nothing, shows a E01 code.


Hi, this is what the error code means,

E1 or E2 Thermistor Failure The dryer will not operate if the exhaust temperature drops below 18 degrees F. or exceeds 250 degrees F.

When the thermistor circuit is open (>50K ohms), the error code E1 flashes in the display.

When the thermistor circuit is shorted (<500 ohms), the error code E2 flashes in the display.

Normal thermistor resistance values:
60 degrees F. - 15.3K ohms.
70 degrees F. - 11.9K ohms.
80 degrees F. - 9.2K ohms.
Hope it helps.

Jan 19, 2011 | Whirlpool GEW9250 Electric Dryer

1 Answer

I have a Maytag Neptune clothes dryer and have had it for years with no problem, love my dryer!!! However, this morning I tried to dry some towels and a code 8.8. displays on the display screen.. Please...


There is a technical sheet inside your dryer's cabinet. You can usually find it by accessing the rear of your dryer. All the fault codes should be explained in this paperwork.

Dec 02, 2010 | Maytag Neptune MDE5500AY Electric Dryer

1 Answer

Kenmore Elite Oasis 110.67087600 Dryer will not power up. No power at all. Prior to this it had a PF flashing. House power checked good.


PF - Power Failure - PF error code indicates a power failure during the dryer's cycle.
Press and HOLD start to continue the cycle, or press off/pause to clear display.

If no-go.. the timer is failed due to a power spike and must be replaced.



Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Apr 26, 2010 | Kenmore Elite Oasis 6808 Electric Dryer

1 Answer

Displayed codes


Hi,
Error code "AD" means air/automatic dry. This type of dryer has no thermo fuse which is a fuse like part that tends to break disengaging the heating element, there for the dryer has a busted heating element.There is no other go you should go for a replacement of your heating element. This solution will solve your problem.

Apr 18, 2010 | Frigidaire GLEQ2152ES Electric Dryer

2 Answers

Kenmore elite oasis dryer model #110.6708 will not operate. flashes f-40. what does f-40 mean?


F40 = thermal fuse blown.
If the fuse is OK the error points to a communication problem between the machine control board and motor control board (check connectors).

Mar 19, 2010 | Kenmore Elite Oasis 6809 Electric Dryer

Not finding what you are looking for?
Kenmore 67082 Electric Dryer Logo

Related Topics:

1,486 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...