Question about Samsung SyncMaster 932GW LCD Monitor

1 Answer

How to remove the back of Samsung 932MW/GW

I need to remove the back of my SM932MW but can't quite work out how to do it. I have a loose speaker which I need to fix and need to get into the back to fix it. I have undone the two screws but not sure if I need to prise the back open and if so whereabout?

Any help would be appreciated!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Yeah you need to prise it out..
Start from the bottom corners first.

Posted on Sep 18, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Disassemble Samsung S27A550H

I need to take mine part too and can't figure out how to do it. My power connector has become loose and the screen loses power at random moments.

Feb 06, 2013 | Samsung " 27"" LED Monitor - Black...

2 Answers


  • Check for loose electrical and VGA cables. Remove the electric cord from the back of the monitor, then put it back in place. Remove the VGA cable from the computer and monitor and put it back in place. Make sure the connection is tight. If you're using a cable extender, remove it.
  • 2 Plug the monitor's electric cord into a different outlet. If you're using a UPS or surge protector, plug it directly into a wall outlet.
  • 3 Attach the monitor to a different computer. If the monitor still doesn't work, replace the monitor's cable. Make sure the cable is less than 5 feet long. If it still doesn't work, the monitor will need to be replaced or repaired. If it works with no problem on the other computer, troubleshoot your video card.
  • 4 Unplug your computer from the monitor and power outlet. Remove the cover. Pull the video card out of the slot on the system board. Push it back into place. Be sure the connection is secure.
  • 5 Put the CD that came with your video card into your computer's CD-ROM drive. Follow the directions to reinstall the video card drivers. Download a new version of the drivers from the manufacturer's website if necessary.
  • 6 Right-click a blank area of your Desktop. Choose "Properties" from the display menu. Click the "Settings" tab. Try different screen resolutions to resolve the problem.
  • 7 Determine whether the problem is caused by electrical interference. Electrical interference will make the monitor appear jumpy or wavy. Move any speakers, radios, fans or other items that can cause electrical interference away from the monitor.

  • Read more: How to Troubleshoot a Computer Monitor '

    Dec 06, 2010 | Samsung SyncMaster 710N 17 in. Flat Panel...

    1 Answer

    How do I remove the case from my Samsung Syncmaster t190 monitor? I removed the screws from the stand, but I can't get more than the bottom loose.

    my daughter's 3 year old SyncMaster T190 monitor developed a fault last week -it switches on ok, perfect display for about one minute, then the screen goes blank. It's the same with either DVI or VGA input.Switching off for a few minutes enables the display again, for about a minute.
    Other Samsung monitors exhibit similar faults, mostly due to blown Capacitors.So, rather than junk the T190, I decided to open it up and check for damage capacitors.
    But how to dismantle it? After spending over an hour searching the web, without success, I had another go.
    Here is how:1. remove the foot dish (undo butterfly screw at bottom)2. swivel the remaining stand post RIGHT back, as far as it goes (it may be quite stiff, I had to use WD40)3. stand the monitor on its top edge, you can now see 2 small cut-backs on the post, where it enters the monitor case4. use a small Philips screwdriver and remove the two screws hidden there5. remove the screw holding the two cover halves of the post together6. remove the covers7. the metal core of the stand, with its hinge part, is now exposed8. pull this out (NOT easy!); the part inside the monitor is shaped like a spade and is a very tight fit! I tapped it with a small hammer while pulling hard.9. when it is removed, you can access 2 screws that hold the bezel and housing together.10. gently insert a small flat screwdriver all along the four edges of the bezel and snap it apart11. the remaining parts can now be dismantled; some cables need unplugging (make a note of polarity!)
    If anybody needs more information, please email me, I have taken some photos
    PS - all capacitors were ok, I've no idea what's causing the fault.

    Nov 22, 2010 | Samsung T190 19" Widescreen LCD Monitor

    1 Answer

    How do i get the sound to work

    You don't, it has no speakers. You need to buy a separate powered speaker system and connect them to the soundcard (the coloured phono sockets on the back of your pc).

    Feb 05, 2010 | Samsung SyncMaster 204B 20.1" LCD Monitor

    1 Answer

    I have used a new Samsung 932 GW monitor now for 11 months and so far there have been no problems until a day ago. The monitor image has become dulled and is flickering at a rapid rate which is literally...


    Yous symptoms indicate a failing power supply. Since it is less that a year old you need to contact Samsung for a warranty replacement. The power supply can be repaired but if you open the case to do it then you void the warranty. If you need additional information about a repair please contact us at the email address below.

    I hope this helps, if so please rate our solution.

    Corporate Computer

    Dec 09, 2009 | Samsung SyncMaster 932GW LCD Monitor

    1 Answer

    How do I get the speakers to work. do i need to run an audio cable from the monitor to the computer

    Quite simply, yes. There should be an input jack in the back of the monitor. The stereo audio cable for this should have came with the monitor.

    Dec 06, 2009 | Balance CM2019 19" LCD Monitor

    1 Answer

    The speakers won't work

    Hi Robin,

    We need to determine if the problem is within the monitor or the computer.

    You didn't give me a lot to go on, so a few questions first.
    • Did they ever work?
    • If they did, did some seemingly unrelated event take place about the same time they quit?
    • Are you sure the wires for Both the speakers and the monitor are all plugged in?
    • Does the sound work through headphones or other speakers?
    Please comment back with as much detail as possible. It helps us help you.

    Best regards,

    Oct 12, 2009 | Computers & Internet

    1 Answer

    1440x900 Monitor seems to think it is a 1680x1050 screen @ >19"?

    Try reinstalling the video driver (Control Panel - System - Device Drivers - Video ... ) Good luck

    Jun 13, 2009 | ViewSonic VA1930WM LCD Monitor

    3 Answers

    Internal Speakers

    The speakers are fairly small and might be easy to replace if you surf the surplus sites.

    If you are not comfortable disassembling the unit, I would call the manufacturer.

    Otherwise, you can check the TDA7268 IC (amplifier for speakers) on the circuit board the speakers
    plug into with a scope.

    I recently fixed my monitor and noted how hot that chip gets (and it supposed to) with the possibly incorrect or inadequate heat sinking Samsung designed into the circuit board that cause my monitor to fail. (although differently)

    You can email me too if you're still having problems with this. The design is pretty straightforward and could be tested to some degree with a multimeter.



    Apr 24, 2008 | Samsung SyncMaster 150MP Monitor

    4 Answers

    Sound cuts out for long periods of time

    I have had the same problem. Only differance is that I run a freeview box though my 940 mw. I thought it was that playing up. Also I all the keys are locked on the unit itself. The remote works everything but when I press any buttons on the monitor you get a 'keys locked info' up on screen. Its doing my head in!!!

    Nov 21, 2007 | Samsung SyncMaster 940MW 19" LCD Monitor

    Not finding what you are looking for?
    Samsung SyncMaster 932GW LCD Monitor Logo

    Related Topics:

    1,126 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Samsung Computers & Internet Experts


    Level 3 Expert

    98762 Answers

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17129 Answers

    phoenix chi
    phoenix chi

    Level 2 Expert

    389 Answers

    Are you a Samsung Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides