Question about Printronix T5000r Label Printer

3 Answers

GAP NOT DETECTED ERROR ON PRINTRONIX T5000 PSN

Hello, can anyone assist me please, the label printer is not happy since we had an office move, perhaps some settings have been lost but we keep getting the 'gap not detected ' error.

any help appreciated!

Posted by on

  • lnc24uk Jul 21, 2008

    hold the 2 buttons on the far right at the same time, this will unlock the enter key, then you can scroll into calibration menu and then calibrate, job done!

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

My label printer quit printing the barcodes on the labels.

I am just getting a series of lines.

I have tried unplugging the machine and still have the same result.

I have tried to calibrate but that is not working either.

Thanks in advance for any suggestions.

Posted on Jul 23, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

And put your Printer on the Gap mark and run auto calibrated on that Printer your problem wll be solved

thanks

Posted on Sep 22, 2015

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Every time GAP NOT DETECTED ERROR ON PRINTRONIX T5000 Do you have any suggestions?

Posted on Dec 02, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Zebra 105sl - printer does not print correct size


This sounds like a mismatch between the printer settings in the print driver and the label settings in your label design software.
In the printer driver - printer preferences- set the physical label dimentions.
Also set the printing defaults to the same settings.
In you design program ensure your label size is the same as the printer driver and also you can set the print preferences in the same program, ensure they all match and hey presto it works. But if nt then contact www,lancerlabels.co.uk, they will talk you through the problem on the phone. They will not charge for the advice.

Mar 17, 2013 | Zebra 105SL Thermal Label Printer

1 Answer

We have a dymo labewriter that has a label jammed in the roller. Part of the sticky part is stuck on the roller. Cannot be pulled through. What to do?


LabelWriter Label Jam
  1. Unplug your LabelWriter.
  2. Remove the spool and labels.
  3. Remove the face plate.
    • Note: The face plate is the piece with the DYMO name/logo.
  4. Using the paper release lever on the left side of the printer, move the print head away from the feed mechanism.
  5. Straighten out a paper clip and GENTLY cut away at the label caught in the printer.
  6. Using caution, begin removing the label.
    • Note: We recommend using tweezers to remove the jammed label.
  7. Reinsert the face plate back on the LabelWriter. If you need assistance reinserting the face plate:

https://dymo.custhelp.com/app/answers/detail/a_id/278/session/L2F2LzEvc2lkL2ZVOGZXRmlr


Click on this link or copy and paste the complete link into your browser.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response. Happy Holidays!

Thanks, Joe

Dec 28, 2010 | Dymo Printers & Copiers

1 Answer

How do you type and print Avery labels 74520? I have lost the instructions which came with the labels.


This can be done with settings through your word processing program. Assuming you are using Word:

Microsoft Word 2007
The newest version of Microsoft® Word now includes hundreds of Avery Templates for labels, business cards, dividers and more.

Find Avery Templates by selecting the Mailing tab at the top of the Microsoft® Office Word screen. Just choose Create > Labels > Options > Avery US Letter, then choose your template by selecting the correct Avery Product Code.

Access Pre-Designed Avery Templates that are available from Office Online by selecting the round Office button at the top left of the screen, selecting New and then choosing the Avery product type. Pre-designed templates for Avery business cards, greeting cards, dividers, labels, note cards and postcards are available.

Avery Wizard for Microsoft Office is a free download which inlcudes step-by-step instructions to format Avery labels. Trust this is helpful. :)

Dec 08, 2010 | HP Officejet 6310 All-In-One InkJet...

1 Answer

I have a Zebra s600 that is set to 30 darkness and the head is screwed down fairly tight. I can print this way but if the printing lightens up, I don't have any more adjustment. The barcode reader picks up...


0.print config label (printer off, press Cancel button and tur on printer, wait 5 secunds and relese button)
1.press the last button until the ligth set on Darkness (Darkness on),
2 press the 3rd button 10 times( darkness down from 30 to 20 (3rd button=less 2nd button=more),
3.press 2 times the last button untill the 3 leds flash(save)
4.turn printer off.
5.Press pouse button, turn printer on, still pressing for 8 secunds, and then release te button.
6.The printer go to print the test label, let run 3 or 5 labels, then pause.
If not happy, repeat steps 1 and 2 (less times 2 or 3 times at the time and save)
print configuration label again ans se if you happy.
If the printer still going to darkness 30, chek if you forgot to save or check the driver settings and change.
Last option Resect to Factory Defult (this drop darkness to +10)

Oct 29, 2010 | Zebra Stripe S600 Thermal Label Printer

1 Answer

I WANT TO PRINT LABELS ON A HP PHOTOSHOP D5360


You may want to check the ensuite software that came with the printer, and see if it offers label printing. More likely, you can access label printing templates in Microsoft Office or Works, perhaps even Openoffice.org's freeware.

Oct 22, 2009 | HP Photosmart D5360 InkJet Printer

2 Answers

Printing labels setup on the PXMA MX860


Hello,

You don't need to do anything to set the printer up except to tell it you have heavier stock than normal.

Your answer lies in the program you are using to print labels. Please tell me which program you are using and what other office type programs you have on the computer and I will try to give you a viable solution.

Chris

May 27, 2009 | Canon PIXMA MX850 Multifunction Printer

1 Answer

Lost Installation cd. Moved from home to office and can't install on office computer.


Hello Tom,

How are you doing? Could you please provide me the exact model of your printer so that I can find a link where you can download the drivers and use the printer at office.

Thank you.

Oct 25, 2008 | Lexmark Printers & Copiers

2 Answers

My printer display keep showing " Warning, Ribbon in", cannot print multiple label at a time


i have the same problem , but my printer is ZEBRA S4M ZPL

my solution is:

in your barcode software: change printer settings: 1 and 2

1 . in media setting : change media type --> Thermal transfer
2. in documents options , configuration --> use printer settings

by Lin Yu Hsien

Oct 15, 2008 | Zebra Z4Mplus Label Printer

1 Answer

Dvd labels


I would use Avery brand. Found at your local office supply store.
Neato DVD labels is another brand.
If I could be of further assistance, let me know. If this helps or solves the issue, please RATE it.
Thanks, Joe

Oct 06, 2008 | Brother MFC 420CN All-In-One InkJet...

Not finding what you are looking for?
Printronix T5000r Label Printer Logo

Related Topics:

3,468 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printronix Printers & Copiers Experts

Toby
Toby

Level 1 Expert

34 Answers

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

Waheed Hudewale

Level 2 Expert

209 Answers

Are you a Printronix Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...