Question about Kenmore 33464 / 33465 / 33469 Gas Single Oven

1 Answer

F30 Still not working

Posted by on

  • nelsonvas67 Jul 27, 2008

    My kenmore gas oven displays F30 when I turn it on

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

My kenmore gas range displays F30 when I turn the oven on

Posted on Jul 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

F30 oven won;t come on and


since how long are you getting this error ?

Jul 21, 2008 | Kenmore 33464 / 33465 / 33469 Gas Single...

1 Answer

Code reading is F 30 and oven not working


F 30 - Open probe connection.

1. (F30 or F31) Check resistance at room temperature & compare to *RTD Sensor resistance chart. If resistance does not match the RTD chart replace RTD Sensor Probe. Check Sensor wiring harness between EOC & Sensor Probe connector.

2. (F30 or F31) Check resistance at room temperature, if less than 500 ohms, replace *RTD Sensor Probe. Check for shorted Sensor Probe harness between EOC & Probe connector.

Hope this helps.

Jul 26, 2011 | Ovens

1 Answer

F30 error on kenmore elite electric stove


F30 - Open Probe connections

F31 - Shorted Probe connections

Suggested Corrective Action
1. (F30 or F31) Check resistance at room temperature & compare to *RTD Sensor resistance chart. If resistance does not match the RTD chart replace RTD Sensor Probe. Check Sensor wiring harness between EOC & Sensor Probe connector.

2. (F30 or F31) Check resistance at room temperature, if less than 500 ohms, replace *RTD Sensor Probe. Check for shorted Sensor Probe harness between EOC & Probe connector.

Hope this helps (remember to rate this free answer).

Jun 04, 2011 | Ovens

1 Answer

What does f30 mean on the read out


F30 = Open Probe Connection

1. (F30 or F31) Check resistance at room temperature & compare to *RTD Sensor resistance chart. If resistance does not match the RTD chart replace RTD Sensor Probe. Check Sensor wiring harness between EOC & Sensor Probe connector.

2. (F30 or F31) Check resistance at room temperature, if less than 500 ohms, replace *RTD Sensor Probe. Check for shorted Sensor Probe harness between EOC & Probe connector.

Hope helps.

Apr 25, 2011 | Frigidaire 30" Self-Cleaning Freestanding...

1 Answer

My Oven is displaying a f30 ERR message and won't allow me to use my oven,,,the stove works fine....what do i do?


I have same problem, displaying a f30 err message and does not work oven rest is working. I have changed sensor still does not work.

Apr 17, 2011 | Frigidaire FEB27S6DC / FEB27S7DC Electric...

1 Answer

My oven gives an error code of F30 and the door lock flashes?


Hi,
Your f30 problem may be a bad sensor circuit. It may have an open connection or just plain defective sensor. Check the connection between the clock and the sensor as well as disconnect and measure the resistance of the sensor - should be about 1090ohms at room temp (75F)

Nov 16, 2010 | Frigidaire FEB30S5D Electric Single Oven

1 Answer

What is F30 error?


Range made by Frigidaire, cannot pull up info right now for that F30 code, just the F3 which means something is wrong in the sensor circuit, sensor, wiring harness or the EOC/clock...what does your tech sheet tell us this F30 means??? What was the ohm reading on the old sensor.....if changing this did not solve the problem about down to checking the wiring harness, if it is ok back to the clock causing the problem if the F30 pertains to the sensor circuit failure....

Oct 14, 2009 | Kenmore 40494 / 40495 / 40499 Electric...

1 Answer

F30 ERROR


F30 error every time I turn the oven on

Jul 21, 2008 | Kenmore 33464 / 33465 / 33469 Gas Single...

1 Answer

F30 Erorr on stove...


The fault code shows that your temperature probe opened.

1. Check resistance at room temperature & compare to RTD Sensor resistance chart.
If resistance does not match the RTD chart replace RTD Sensor Probe.
Check Sensor wiring harness between EOC & Sensor Probe connector.

2. Check resistance at room temperature, if less than 500 ohms, replace RTD Sensor Probe. Check for shorted Sensor Probe harness between EOC & Probe connector.

Jun 29, 2008 | Frigidaire FGB24S5A Gas Single Oven

Not finding what you are looking for?
Kenmore 33464 / 33465 / 33469 Gas Single Oven Logo

Related Topics:

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Ovens Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Kenmore Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...