Some DVD's sound fine whilst others have background sounds but no voices. I do have an old model TV that has mono sound.Would that cause it?
" Some DVD\'s sound fine whilst others have background sounds but no
voices. I do have an old model TV that has mono sound.Would that cause
I wrote a short article for someone who had a similar problem a few days ago.
I will edit it for you so that it fits. Here it is.
Your DVD player should have output connectors in the
back of it to plug your amplifier or receiver into. If you have a Stereo
system (no surround sound speakers, or front center speaker) connect
the DVD Audio Cables on the back of the DVD player to the STEREO (or MIXED ) Output
Jacks. If it is connected to the Left Front and Right Front jacks of
the "Surround Sound" output jacks instead of Stereo(or MIXED) then the dialog
will be sent to the CENTER channel output. If you have no center channel
speaker you will not hear it. Thus no dialog.
NOTE: In your case for the TV that is mono, here is the solution.
1 Connect a stereo pair of RCA cables (red and white "male" connectors at each end) to the Mixed or Stereo Output of the DVD player (NOT ANY SURROUND OUTPUTS).
2 Purchase an RCA type "Y" connector that has 2 female to a single male connectors on it. Walmart about 3 dollars.
3 Plug the single male plug of the Y connector into the back of the TV set's single mono audio input.
4 Connect the stereo RCA pair from the MIXED output of the DVD player into the Y connector that is now on the back of yourTV.
5 Run your yellow Video output from the DVD into the Back of the Set's yellow input.
That should do it. The sound should be clear and correct with dialog, effects and music.
Hope this helps,
Jan 27, 2011 |
Audio & Video Receivers