Question about Philips 43PP9202 43" Rear Projection Television

1 Answer

Philips Rear Projection TV 43PP9202 Picture looks 3D

A couple of months ago the picture on our tv had red and green at the bottom and it looked like the picture was folding up. Now the picture looks like you are watching 3D without the glasses. Anyone have any ideas?

Posted by on

  • Anonymous Oct 12, 2008

    I have the 60 inch and replaced both IC's and 4 resistors, the picture went from having red & green color at the top & bottom to now the picture looks 3-D. Any idea what I may have missed?



  • lthorpe2 Oct 12, 2008

    I have the 60 inch bought in 2004. Replaced both IC's and 4 resistors.
    The picture went from having red & green lines at the top and bottom and writing looked like it was in 3-D, to now the whole picture looks 3-D, red & green is gone.
    What did I do wrong?


×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Philips Master
  • 8,617 Answers

You need to replace both convergence ICs they are STK392-120 you will also need about four 6.8 ohm 1 watt resistors. You can get replacement ICs and resistors at the following link and they provide free instalation instructions with pictures. here is the link.
http://servicemanuals.vstore.ca/

Posted on Jul 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tv picture settings for rear projector tv want colour settings for my tv


If you cannot align RED, BLUE, or Green your TV has a convergence failure. You can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Jan 20, 2011 | Philips 43PP9202 43" Rear Projection...

2 Answers

I have a friend with a Philips 60PP9202 TV, and she describes her problem as: "The top/bottom corner of the picture is kinda waved and the color is blue/red (3D like)". Would anyone have an...


The tv have a problems known as a convergence problems,it dead.The tv have colors lines R,G,B mis alignment,have colors shadows pictures or 3D pictures look alike.The tv convergence board have dead 2 STK convergence ICS and some or all it resistors are dead too.These parts on the tv convergence board,must be replaced to solved the tv picture convergence problems.The shop,will cost u like $300-350 for parts and labors.

Nov 15, 2010 | Philips 60PP9202 60" Rear Projection...

1 Answer

My philips 46pp9302 picture looks green ive lined up the blue and red colors but dont know whats wrong.....help


The tv have a problems known as a convergence problems,it dead.The tv color lines R,G,B mis alignment,have colors shadows pictures or 3D pictures look alike.The tv convergence board have dead parts.The 2 STK convergence ICS and some or all it resistors are dead.These parts on the tv convergence board,must be replaced to solved the tv picture convergence problems.The shop,will cost like $300-350 for parts and labors.

Oct 27, 2010 | Philips 46PP9302 46" Rear Projection...

1 Answer

When i just the red and green the picture holds when i turn the tv of then back on agian i have to readjust every thing agian


Projection TV sets have several common problems listed below.

Problem #1) Convergence

Symptoms:

  • Screen Looks 3D
  • Colors wont align
  • Screen may look distorted
  • No Audio/Video - TV makes a chirping sound.
Problem #2 CRT Fluid has clouded over. Symtoms
  • Dull looking video
  • White looking video
  • Halos around objects
  • Red/Orange looking video

You can see some examples and find a fix here...

bb0cf99.pnghttp://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Mar 05, 2010 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

THE BOTTOM OF THE PICTURE IS BEGINNING TO WAVE - AND THE RED,GREEN ARE IMPOSSIBLE TO CONVERGE


There are two common problems with Projection TV sets. Problem #1) Convergence Symptoms:
  • Screen Looks 3D
  • Colors wont align
  • Video may look distorted
Problem #2 CRT Fluid has clouded over. Symtoms
  • Dull looking video
  • White looking video
  • Halos around objects
  • Red/Orange looking video

You can see some examples and find a fix here...

bb0cf99.pngSOLUTION http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Oct 13, 2009 | Philips 60PP9352 60" Rear Projection...

1 Answer

Phillips 43" T.V sound is fine Picture is Faded? Still visible but very light and faded..How do I fix


There are two common problems with Projection TV sets. Problem #1) Convergence Symptoms:
  • Screen Looks 3D
  • Colors wont align
  • Video may look distorted
Problem #2 CRT Fluid has clouded over. Symtoms
  • Dull looking video
  • White looking video
  • Halos around objects
  • Red/Orange looking video

You can see some examples and find a fix here...

bb0cf99.pngSOLUTION http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Oct 06, 2009 | Philips 43PP9202 43" Rear Projection...

1 Answer

Red curves on bottom and top of picture


You have a convergence problem. Here are some of the most common symptoms. 

Screen looks 3D
One or more colors can't be adjusted when when using the convergence menu. 
Screen is bowed in but stationary.

Solution: 
You need to replace the convergence chips and convergence resistors. Check the site www.TvRepairKits.com. They have put together a kit for your exact model. The kit inlcludes a photo instruction guide, original Sanyo STK chips, convergence resistors, etc. Everything you need to fix it yourself. Its an easy fix. 

Jan 18, 2009 | Philips 43PP9202 43" Rear Projection...

1 Answer

My phillips model 60pp920217f has a horrible picture...no green to the color


The green CRT coolant has congealed thats whats giving you the green halos. Change the coolant in the green and blue and your set will be fine. red is never affected so the red coolant should be fine.

May 07, 2008 | Philips 43PP9202 43" Rear Projection...

Not finding what you are looking for?
Philips 43PP9202 43" Rear Projection Television Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68323 Answers

Are you a Philips Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...