Question about Pioneer Car Speakers & Subwoofers

1 Answer

Got a new deh-6000ub and wire harness for honda accord dont know how to install the harness

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 624 Answers

You need an installation harness. You can get them at most anyplace that installs car stereos. Once you have the installation harness for your car, you just match up the colros of the wires on it to the same colors of the harness for the Pioneer. Make sure that each wire is insulated from anything by using some electrical tape and make sure they all have good connections. Strip away close to about an inch on each wire and then twist them together and then tape them good. After all the wires have been connected, all you need to do is plug the Pioneer harness into the Pioneer radio and then plug the installation harness into the factory wire harnees connector in the car. If you have any wires that do not match up in color, you can normally leave then not connected to anything, but make sure they are insulalted with electrical tape. Most all the wires should say what they are for. Matching the colors is the easiest way to do this.
Let me know if you need more help. I can always give you a detailed wiring of the Pioneer. I do not have the wiring diagrams for the car though.

Posted on Jul 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I buy a use deh-5200 and i dont have the wiring diagram for installation


If you purchase a wiring harness it will come with the color codes on the package. By doing this, you will be able to hook the appropriate wires up and plug your radio in. You can get these at www.crutchfield.com

Aug 26, 2011 | Car Speakers & Subwoofers

1 Answer

Wiring diagram pioneer deh-p4950mp


If you are installing the radio, I recommend you purchase a wiring harness to your specific vehicle. The wiring harness will have the color code and all you have to do is match colored wires. All aftermarket radios have standardized color codes for their wires. Hope this helps.

Aug 25, 2011 | Car Speakers & Subwoofers

1 Answer

Can I hook up a pioneer deh-p3500 without a harness?


If you are talking about the radio harness, probably not. If you are talking about the wiring harness to plug it into the vehicle. The answer isn't so simple. Aftermarket radios have standardized wiring colors. BUT, they don't match vehicle wiring. So, unless you know your vehicles wiring diagram very well, I wouldn't recommend installing without the wiring harness. If the problem is that someone installed in your vehicle before this and cut the vehicle side of the harness, then I recommend you visit scosche or PAC website to see if it is available. It CAN be done, the question is SHOULD it be done. And the answer is no. Harnesses are very cheap these days, unless you have a data transfer style radio, then it gets a little costly. Most are around $7-$20. Hope this helps

Aug 22, 2011 | Pioneer Car Speakers & Subwoofers

1 Answer

Wiring on a 88 honda accord for a stereo,i didnt buy the wiring harness


I would highly advise getting the wiring harness. They are usually $15-20 and will save you time and make the install alot easier and help avoid errors.

Feb 04, 2011 | Car Speakers & Subwoofers

1 Answer

I tried to install a pioneer deh-5 into a 95 honda accord with no luck. Seems to not have power but fuses are ok.


uhh smell ur amp if it smells like something burnt you might wonna new amp for ur system i had that prob. to with a kicker amp 2400 watts and it was the amp was horrid

May 17, 2010 | Car Speakers & Subwoofers

1 Answer

No power


Red is power (+12v)
Black is negative
Orange or Yellow is memory
Blue is for amplifer turn on signal
Then there will be 4 or 6 pairs wires with the same color which are the speaker wires. The solid colors are positive, the solid with a black stripe are negative.
You can get a cable harness for your car from Walmart and then all you need to do is match all the wires color for color to each other from the cable harness to the new stereo wires with **** splices and a crimping tool which you can also get from Walmart and that's it. Then all you need to do is connect the two old connector from the old car stereo to the new cable harness connector which is made for your car and there you go. After that you may need a dash kit which you can also get at Walmart..Hope this helps.

May 09, 2009 | Car Speakers & Subwoofers

1 Answer

86 buick century


you need a wiring kit available at mose fine mass merchantes - best buy, circuit city, fryes, walmart etc.
One end will be bare wires to attach to the harness from the radio... the other end will be slots to plug the 3 connectors into.
Metra part # 70-1858
Looks like this...
http://cgi.ebay.com/GM-88up-Radio-Wire-Harness-GM02B-70-1858-Chevy-GMC-Olds_W0QQitemZ260293098000QQcmdZViewItemQQptZCar_Electronics_Installation?hash=item260293098000&_trksid=p3286.c0.m14&_trkparms=66%3A4%7C65%3A15%7C39%3A1%7C240%3A1318

Dec 25, 2008 | Car Speakers & Subwoofers

1 Answer

86 buick centnuy


all the wires on the harness will be labeled so you know which wires from the radio match which wires on the harness.

Dec 25, 2008 | Car Speakers & Subwoofers

Not finding what you are looking for?
Car Speakers & Subwoofers Logo

Related Topics:

241 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Car Speakers & Subwoofers Experts

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Pablo Gonzalez

Level 3 Expert

733 Answers

Are you a Pioneer Car Speaker and Subwoofer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...