Question about Sirius STILETTO 100 MP3 Player

2 Answers

SL 100 keeps restarting. Computer does not see it when it's hooked up.

Posted by on

  • 3 more comments 
  • kendfa Sep 16, 2008

    Same thing. Will not boot up. States error and tries to restart. Does not get recognized on Sirius Studio, nor on USB. When I try to do a system reset (recommended by Sirius) it will not recognize unit and says to call Sirius. They can not help. 2 year old unit, past warranty.

  • scoopdee Oct 18, 2008

    same exact thing, still oolking foe solution

  • jlpenn Oct 18, 2008

    Same exact problem with mine. I did get it on once, by reloading software, turning the unit on and off, taking out the usb cable, etc, suddenly it just turned on and was recognized by the computer... but I can't recreate this, and it's stuck once again in restart mode. Do you think a loose wire?

  • Anonymous Jan 20, 2009

    I have the same problem. I just now tried this and it worked.

    Plug the usb cable into the sl 100. The computer did not recognize it. I then held down options and display for at least 5 second simultaneously. (sp?) and then it said Recovering please wait... then a screen came up on my computer screen asking if i wanted to use the siruis recovery program or take no action. I cliked recovery program and it is now deleting all data in memory including any scheduled recordings and installing new software. it is 50% done. I'll wait and let you know if I typed all of this for no reason! boring.........................80%...............95%...................ahhh **** there is two loading lines I'm back to 50%...........................60%............65%......75% ......... now the computer recognizes the sl 100 ............ very positive...................DONE I'll test it now....................It WORKED ...............Yeah.

  • tomasss Feb 10, 2009

    Icon comes up resets then shuts down; no response when plugged into computor; tried holding down options and display; nothing.



2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had to re-install Version 1.1 of My Sirius Studio from original CD that came with my Stilletto 100 as the most recent Version of My Sirius Studio did not recognize my Stilletto when I plugged the USB into my PC, when I re-installed Version 1.1 over the newer version, I shut down the Stilletto by holding down the power swith for 5 seconds then powered back up while holding down the Options and Display buttons at same time until the screen asked me to plug the USB cable into PC to recover. I did this and about 5 minutes later the the software/firmware was re-installed in my SL 100. I then plugged SL 100 into antenna and selected satellite radio, took about 1 minute to re-aquire the station ID's and Icons then I selected Sirius Hits 1 then everythings was back to normal, other than I lost all of my stored songs and recordings, but at least my SL 100 is operational again.

Posted on Jul 14, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Cuando lo enciendo sale el siguiente cartel "Entered Debug Mode" y no me da acceso a nada

Posted on Sep 29, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I hook up the receiver to the subwoofer to the tv

Here's the Owner's manual ->
There are many ways to connect the system depending on your receiver's outputs and the speakers. Usually, the TV L/R output connects to one of the receiver's inputs. The receiver's preamp sub output goes to the powered subwoofer. The receiver's FL/C/FR/SL/SR/RL/RR speaker outputs go to the respective speakers.

Mar 03, 2017 | Paradigm Audio Players & Recorders

1 Answer

My 1998 saturn sl series idles to high even after 100 mile drive

Start by replacing the coolant temp switch.It is different than the sensorThe temp switch tells the computer if the car is warmed up to change idle.It is the best place to start and it is only 9.00 at Auto Zone

Nov 17, 2011 | 1998 Saturn SL

1 Answer

We have a 2000 Solara that we just replaced the battery in, or rather, we tried, and the horn is now staying on continuously. It keeps blowing a 100 amp fuse, and does not have a key fob type alarm. The...

Why was the battery replaced? Theres no reason the the 100 amp fuse to blow unless the alternator is shorted or you hooked up the battery backwards. I think the 100 amp fuse goes to the alternator. If it was hooked up backwards then you may have engine computer damage.

Aug 25, 2011 | 2000 Toyota Camry Solara

1 Answer

My technicssl-dz1200 sd card keeps telling me no sd audio track.

try loading the audio again on your computer. maybe it didn't load properly. also try switching the technics deck off and back on. maybe it is having a bad day and needs to restart.

Jan 05, 2011 | Technics SL-DZ1200 Turntable

1 Answer

My computer starts windows and restarts

It would be best to start with a fresh bios flash that you can download from


After this is installed then start the computer in SAFE mode and run a full virus, malware and spyware scan.

Then restart the computer in normal mode and if it fails again you will have to use a Windows restore disc, if you have one, or use the Windows installation disk to start and run a Repair on the system then restart it. Then download all the remaining up top date drivers at (51.394 MB) No pass required.

And run a full virus, malware and spyware sweep on the download before using it. Then install all the latest drivers to you system and restart. Then check for any Microsoft updates.

Sep 29, 2009 | Soltek SL-K890Pro-939 Motherboard

1 Answer

I have a new compaq parsario

restart the machine, and go to safe mode.
change the refresh rate of the monitor to 60Hz and 800X600 resolution.
restart the machine

Nov 30, 2008 | Computers & Internet

1 Answer

Lexmark 1200 Series

unplug your usb cable,uninstall printer then reinstall

Nov 09, 2008 | Lexmark X1270 All-In-One InkJet Printer

1 Answer

My sansa keeps restarting itself

I would recommend that you upgrade the firmware on the device..Once the firmware is update you shouldnt have any problems..To update the firmware follow the link below
Please rate accordingly
Thank you

Mar 23, 2008 | SanDisk Sansa e260 MP3 Player

1 Answer


I have had the same problem with my machine as well. have you tryed, keeping it hooked to your computer while sewing, even if you are not using your embroidery unit it still needs to be hooked up, that seems to have helped some with the beeping.

Feb 10, 2007 | Singer CE-100 Futura Computerized Sewing...

Not finding what you are looking for?
Sirius STILETTO 100 MP3 Player Logo

2,113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sirius Audio Players & Recorders Experts


Level 2 Expert

509 Answers


Level 3 Expert

3289 Answers

Scott Thompson

Level 2 Expert

44 Answers

Are you a Sirius Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides