Question about RCA HD52W59 HDTV Projection Television

1 Answer

URC Unifier 3 digit code for a viewsat plat lite

I need to locate a 3 digit code to load my viewsat remote codes on to my URC Unifier, any help is appreciated.

Posted by on

1 Answer

000

Posted on Jul 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an One For All URC-4700B00 Acess 4 remote control which I have lost the codes for! I need to program a Sharp television but I need the 4 digit codes.


Hi,
I recently came across this link that has the codes for many manufacturer's remote controls. I don't know if it will help you, but give it a shot and let me know. Here it is.
Best Regards,
Mark

http://www.hifi-remote.com/ofa/codes.shtml

Jan 24, 2011 | Projection Televisions

1 Answer

What is a universal remote code to a phillips remote




Hi,

Please go to below website you can get the codes to programme out remote.

http://www.urc.philips.com/

Please follow the below instruction.

1.Location
2.Select your remote
3.On your left side you will have an option called as REMOTE CONTROL CODE FINDER.

9f4dce2.jpg 4.Select the device you need to programme and the make of the device you will get the codes.

Thanx

Jul 27, 2010 | Toshiba 42H81 42" Rear Projection...

1 Answer

I need the codes for the one for all remote urc-3220 please reply asap.


I can help you with your URC-3220 Universal Remote Control issues.

The codes for JVC TV's is:0053.

For complete instructions on entering the URC-3220 remote codes, please refer to my posted Fixya Tip One For All URC-3220 Code Entry.

I hope that helps.
_______________________________________________
One For All URC-3220 Manual
One For All URC-3220 Code List
One For All URC-3220 Code Entry
One For All URC-3220 Code Search
One For All URC-3220 Reassign Key

May 07, 2010 | JVC HD-52G787 52" Projection Television

2 Answers

Ive lost my code book to my tv remote. so i havent had tv for a couple of days lol. the remote mak is Total Control URC-11-2840 and my tv is a sony i need the 4 digit code can you please help. much...


Sony 4 Digital Codes 0000 this is the only code showing in my book for sony RCA uses 000 for theres You can go to dollar store buy remote handunit for 5.00 with codes to TVs.

Jan 02, 2009 | Projection Televisions

2 Answers

Code for remote


I don't think you mentioned the model no. of the one for all remote.You've only mentioned the TV.

Please let me know

Jun 26, 2008 | Projection Televisions

1 Answer

Need set up instructions and codes for one for all remote urc-3220


SEARCHING FOR YOUR CODE
If your device does not respond to the remote control after trying all codes
listed for your brand, or if your brand is not listed at all, try searching for
your code.
NOTE: Before performing a code search for a DVD player or a VCR, turn on the device and
insert the required media.
For example, to search for a code for your TV:
1. On the remote control, press TV once.
2. Press and hold SET until the LED (red light) blinks twice,
then release SET.
3. Enter 9 - 9 - 1.The LED will blink twice.
4. Aim the remote control at the TV and slowly alternate
between pressing POWER and TV. Stop when the TV turns off
(after pressing POWER). If the device does not have a Power
key, you can substitute another function, such as digits 0 ~ 9 ,
CH+, or PLAY).
NOTE: In the search mode, the remote control will send IR codes from
its library to the selected device, starting with the most popular code
first.
5. To lock in the code, press and release SET.The LED will
blink twice.
6. To search for the codes of your other devices, repeat steps
1 through 5, but substitute the appropriate device key for
the device you are searching for.
CHECKING THE CODES
If you have set up the remote control using the Searching For Your Code procedure
as above, you may need to find out which four-digit code is operating
your equipment. For example, to find out which code is operating your
TV:
1. On the remote control, press TV once.
2. Press and hold SET until the LED (red light) blinks twice,
then release SET.
3. Enter 9 - 9 - 0.The LED will blink twice.
4. To view the code for the first digit, press 1 once.Wait 3
seconds, count the LED blinks (e.g., three blinks = 3) and
write down the number in the leftmost box in the TV
code boxes on page 8.
NOTE: If a code digit is “0”, the LED will not blink.
5. Repeat step 4 (on the previous page) three more times for
remaining digits.Use 2 for the second digit, 3 for the third
digit, and 4 for the fourth digit.Write down the code digits
in the remaining TV code boxes on page 8.
6. To check for codes of other devices, repeat steps 1
through 5 (starting on the previous page), but substitute
the appropriate device key for each device you are checking.
Write down the device’s code digits in the appropriate
code boxes on page 8.
I could not find the codes but you can follow these instruction to program without codes

Jun 19, 2008 | Projection Televisions

2 Answers

Need manual/code book for oneforall.com remote for toschiba tv


hi having a problem.getting ther code for a sharp lcd projector.model pg-c20x.have one for all urc-7740.tried all the codes and search methods.no joy.

May 21, 2008 | Mitsubishi VS-50605 50" Rear Projection...

1 Answer

I need 3 digit code for tevion universal remote control to make it work on my diamond tv or a code for one for all urc 7540 remote thank u


If you do not have a code for method one or two you can try a automatic scan. This will scan for every possible
code that the device will have.
1 – Turn on the device you want the remote to control. If you are using a VHS or DVD player please make
sure that it is playing a dvd/video before you start.
2 – Press and hold the DEVICE key you wish to program for 3 seconds. The LED will light up upon
Key press and will go off ater3 seconds ,now release the button.
3 – Press and release the PLAY button and the code search will begin. The LED flashes every one second
when a code has been successfully sent.
4 – When your device turns off, press and release the pause button on your URC, the LED will
remain on once pressed.
5 –In order to now turn your device back on press the CH – button on your URC, if it does not respond
then continually press the CH – button in 2 second intervals until your device switches back on.
6 – Once your URC is successfully controlling the device, press and release the EXIT button on your
URC, the LED will flash quickly four times and then go off.

Hope this helps.

Apr 06, 2008 | Projection Televisions

Not finding what you are looking for?
RCA HD52W59 HDTV Projection Television Logo

Related Topics:

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

D. E. Hev

Level 3 Expert

1059 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

Are you a RCA Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...