Question about Kenwood 1080VR Receiver

1 Answer

Kenwood KDC-MP832U display not working

Hi, I got the Kenwood KDC-MP832U CD player for christmas 2 years ago...a few days ago the dosplay started fading...then it became black, I removed the front panel and it came back, since yesterday it's constantly black. The unit is working...you can listen to radio, CD or USB, but there is nothing on the display. Is something broken or there is a way toy fix this?

thanks

Mari

Posted by on

  • aaroncox Aug 10, 2008

    I have a Kenwood KDC-MP632U and I have the same problem. The display is illuminated and I can use the dials and buttons to control like normal, but the display does not come on.

  • Mari Marinosyan
    Mari Marinosyan Nov 17, 2008

    Actually it turned out that there is a problem with the front panel. i found out that these Kenwood products have 2 years warranty and was able to find a service provider and fix it this way



    good luck to you all...hope this helps

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I had this problem! It was the Cars Battery. Kenwoods unit's fade or go completely blank when there is little power to power the stereo. Try charging your battery or grabing a new one from a scrappy! I was all over the net looking for help but finally sorted it!

P.S. My younger brother had to do the exact thing and it worked for him as well!!!

Posted on Nov 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to install a Kenwood kdc 138 in a 1992 Ford Escort LX?


if its anything like my 92 ranger you take the dash apart around the radio and the stereo should unscrew, in my ranger the new cd player went in without any extra harness as it was the same size as the stock, if not you can but harnesses to go where your old stereo did, to connect the speakers you can buy a ford wiring harness from walmart or any store with an audio department. these plug in to your vehicles wiring harness so you don't have to cut it out, after that you simply match colours from the wires of the new cd player to the wiring harness

Dec 25, 2013 | Kenwood DISCONTINUED - KDC-138 In-Dash CD...

1 Answer

Car stereo installion


I think you left the yellow wire from the kenwood disconnected

Mar 05, 2013 | Kenwood KDC-BT752HD CD receiver

1 Answer

My beautiful kenwood its entertaining me anymore and i really depressed. first off id like to say i purchased this receiver some yrs back. Last yr, my whooper stopped playing and i had to get use to not...


Hi,

From the sysmptoms presented it seems that the main circuit board in your kenwood needs replacement . This happens sometimes due to extensive usage and power surge. I am unable to know your location. Hence sending the entire list of all contries contact number for Kenwood. Only they can replace the authentic main board.

http://www.kenwood.com/

Let us know if you want something more else accept the solution.
Thanks for contacting fixya.com

May 19, 2010 | Kenwood VR-806 Receiver

1 Answer

Kdc-mp6036 kenwood cd player jus cant find the code


Today i brought a 98 ford and the dealer replaced the cassette player with a Kenwood KDC-MP6036 from a trade in they had. It was fine for 30 min approx then music stopped and "PROTECT" was displayed and now nothing works ???? what can i do

Aug 07, 2008 | Kenwood Audio & Video Receivers

1 Answer

I got a new battery in my car and now my kenwood cd deck says enter code. i bought the car used with the deck in it so i dont know the code


Hi dnaso

I have written a tip on how to reset the code that works for most KDC kenwood decks. Click here to check it out.

regards
robotek

Jun 10, 2008 | Kenwood Audio & Video Receivers

1 Answer

I cant figure out how to change the time on my kenwood cd player kdc-mp5032


Hi adr_ram

Try this procedure I wrote

That will work for you no worries mate... :)

regards
Graeme

Apr 28, 2008 | Audio & Video Receivers

1 Answer

Hi, I took off my car Kenwood CD-player and installed it into my new car but unfortunately it doesn't work anymore because once i turn it on it asks me to enter a code.Can you,please,send me this code...


Dear Memo,
you can download the manual for this ,player, from this site:

http://www.devicemanuals.com/guide/Car%20CD%20Changer/Kenwood%20French/Kenwood-French-KDC-MP625-CD-DVD-Changer-Owner's-==TVRFd05qVXk=.html

in this manual you can get the security code for this Player also.


Cheerup and be happy always

Mar 27, 2008 | Audio & Video Receivers

Not finding what you are looking for?
Kenwood 1080VR Receiver Logo

647 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Audio & Video Receivers Experts

 Elex
Elex

Level 2 Expert

49 Answers

ask_not

Level 1 Expert

28 Answers

Fbcgilly

Level 1 Expert

13 Answers

Are you a Kenwood Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...