Question about Hitachi Projection Televisions

1 Answer

Hitachi C2142S full onscreen menus and sound has gone after attaching a PS2 with the 3 coloured leads to the front

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Repair man came nothing to do with PS2 It was dried joints

Posted on Jul 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i adjust the lights on my hitachi 50gx30ba tv


It sounds like you are having a convergence problem--see attached photos for examples----

If so, with the original remote go into customer menu and select convergence (Some Hitachi sets have a button up front called magic focus--if there engage to see if it helps) in the menu you can also attempt to adjust this--if it will NOT MOVE either up/down or left/right for either red or blue---convergence circuit has a problem.

Let me know what you find.


3_23_2012_2_12_45_pm.jpg



3_23_2012_2_13_54_pm.jpg



3_23_2012_2_14_32_pm.jpg

Mar 22, 2012 | Hitachi Projection Televisions

2 Answers

LOST COLOUR: C29 F500DR The colour seems to have disappeared on my Wow by srs C29 F500 DR. I have a digital set top box attached. I cannot seem to restore colour. Any adjustment of the picture via remote...


I suspect that you have connected via componet I would check the red green and blue cables

you may have lost a one of the colors but check the cables first

is it b/w on it's menus?

if it is you have a color element out

Sep 22, 2008 | Hitachi Projection Televisions

1 Answer

I have a Hitachi 51G500 and there is sound but not picture. Tried the reset button and nothing happened. all three bulbs are still working. what can be the cause of this not having sound but no picture?


Is it connected to an antenna? Is it all channels? Can you play a DVD? Is the contrast too high? Can you access the onscreen controls? I have the 57" model and cannot figure anything else, currently -- the manual does give any suggestions.

Dec 31, 2009 | Hitachi 51G500 51" Rear Projection...

1 Answer

The colour keeps going to more blue and the screen is fuzzy?


you should be able to align your projectors through the setup menus. you will have to align two colors, usually red and green to stop the fuzziness and you should look at the tint selection in the menus for the blue color if the realignment does not fix it as well.

I could not locate the manual on the Hitachi website.

Oct 29, 2009 | Hitachi UltraVision CineForm 55VG825 55"...

1 Answer

Hitachi 61SBX59B TV will not power up


Contact me via email--you may have a bad cap in this set--it is location C707--if it is gone there will also be a 2 amp pico fuse blown---I can tell you where to look for both parts and what they look like--if the fuse is blown it is 99% chance just it and the cap are bad--very common in these sets--about 5 dollars for both parts together--each part is soldered in with two leads---I have fixed a lot of HItachi big screens--if you locate the fuse and it is gone the cap will also be bad.....

I do this here for free and if you want the possible answer take a minute and give me a vote here---I am here to help people.

etower.766@netzero.net

Sep 11, 2009 | Hitachi 61SDX01B 61" Rear Projection...

1 Answer

Hi have a hitachi 50vs69a just replaced the buld with the phillips cause they say its a better buld better colour. well my tv looks sick, lots of red more in the center though, also looks blury a bit.. I...


sounds like u the victum of after market lamps this is commom only buy manufacure replcment parts ur problems the lumens on that after market bulb solution buy only manfg parts

Jul 25, 2009 | Hitachi 50VS69 50" Projection HDTV

1 Answer

Doubt about hitachi model 57f500


It is HDTV ready and supports the  1080i (HDTV) • 720p (HDTV) • 480p (EDTV) • 480i (SDTV) • 540p formats.
You can download the manual from: http://www.devicemanuals.com/downloadguide.php

There should be buttons on the front that allow you to access menus, etc. (They may be behind a door or panel.)

May 28, 2009 | Hitachi 57F500 57" Rear Projection...

1 Answer

Hitachi 53uwx10ba turns on & off when off red flashing light/clic


Same problem. Replaced both convergence ICs about 5 months ago. Worked fince since then and just recently no sound, no video, blinking red on front panel and clicking sound. I suspect that the ICs went bad again and blew a resistor or two. I used cheap Chinese ICs instead of the Sanyo ones and thing this is why. I'll be looking at it again and post solution.

Jan 21, 2009 | Hitachi 50SBX78B 50" Rear Projection...

1 Answer

Hitachi 57f500 blurriness and getting darker


Sound like you need clean fluid and some adjustments.

Dec 21, 2007 | Hitachi 57F500 57" Rear Projection...

5 Answers

No sound on hitachi 53sdx01b


The first thing to try is rescanning the Freeview channels as it may just be a software corruption...if you have the option of "1st time installation" pick that.Also let me know if there is any buzzing sound coming from the tv..

Oct 16, 2007 | Hitachi 53SDX01B 53" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Hitachi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...