Question about Janome Memory Craft 9000 Computerized Sewing Machine

1 Answer

Cars on a vl commodre 1986 is it electronic ditirbutor or points?

Posted by on

  • chris07551 Jul 21, 2008

    yes i already knew the anser i was trying to explain it to my mate he is so dumb so thanks dude u get a fixya buddy yes i have the vl calais with the rb30 nissan turbo engine



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 167 Answers

Looks like they had two options for engines in 1986, a V8 and a nissan designed inline 6. The nissan engine is electronic ignition with fuel injection. The V8 looks like it is an older carbureted design that had a points type distributor. I have neverheard of the VL Commodore... interesting looking car.

I kind of have the feeling you already knew the answer to this question =P

Posted on Jul 21, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Vl-20/guitar amp/manual

Um, a sewing machine?

May 16, 2017 | Sewing Machines

2 Answers

My pfaff 7570's display is not working

what are the symptoms you can see in your machine.?

1. check power cable from plug point.
2.if you can open your machine, check display wire loose contact or not.

Dec 16, 2015 | PfaFF Sewing Machines

2 Answers

How to correct timming on Bernina 930

Rare timing problems with the 930. I created this technical document for Bernina dealers in 1986. Hope this helps.
Also to check for the timing of loop lift, please see the enclosed photos. Note that the needle position is in the right hand position with the hook advancing so that the tip of the hook point is exactly flush with the right side of the needle. (Photos are showing the hook point for training purposes only). These observations and adjustments are always checked with the hand-wheel turned in the DOM (direction of motion). If loop lift timing is off as per the Tech sheet enclosed, the tool for correction is still available.

Aug 26, 2015 | Bernina Sewing Machines

1 Answer

Singer advance7422 burst the tread

When you thread the top do it with the foot in the up position. As you thread you should notice the ease of movement through the tension, holes, etc. If you come to a point it is sticking, check why. The tension could be a problem. Anyway, if you don't seem to have a problem hear then put your foot down. Pull on the thread to see if it is stuck or not moving with an extreme amount of difficulty. You may need to lower the tension. A good starting point is 3. I expect your tension is the problem. If it is still the problem then lower the bobbin tension slightly. By the time you finish the knot should be in the middle of the fabric. Sometimes there is one more problem It is the thread is poor quality and is unravelling in the needle hole. Observe this closely as you sew. You know what to do if this is the problem.

Dec 25, 2014 | Singer Advance 7422 Electronic Sewing...

1 Answer

Machine going too fast

The foot pedal is faulty, the electronic voltage control is not working and only when the contacts are connected physically does the machine receive any power (maximum) It depends on your type of foot pedal whether or not it is repairable

Feb 17, 2014 | Toyota Sewing Machines

1 Answer

I was given a 1986 Singer Sew Machine Model No. 6268. The electronic embroidery unit is missing. Where can I buy one?

It may be difficult to find an embroidery unit for this 1968 machine as they did not make one.

Nov 17, 2013 | Sewing Machines

1 Answer

Janome MyExcel 4018 user manual

Or try the Janome website

Apr 25, 2012 | Janome Sewing Machines

1 Answer

Pfaff sewing machine hobby 850? from 1986...

Try installing a brand new needle. A bent/dull needle will frequently not pick up the bobbin thread.

If a new needle doesn't help, then most likely the machine has been knocked out of time (the needle and hook are out of sync). You can search for sewing machine timing to see if you want to try to fix it yourself or take it for service. Timing is usually affected when a needle hits something hard (like a pin, the needleplate or a hard seam of fabric) and is deflected

Jan 04, 2018 | Sewing Machines

3 Answers

Singer 7442 Bobbin Will not wind

I accidentally used 220V for my singer 7442, I don't know if there is a fuse that I can change? can someone help me with this?

Jan 19, 2008 | Singer 7442 Mechanical Sewing Machine

Not finding what you are looking for?
Janome Memory Craft 9000 Computerized Sewing Machine Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Janome Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1133 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

191 Answers

Eva Hack

Level 1 Expert

25 Answers

Are you a Janome Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides