Question about Cameras

3 Answers

Flash Control Settings

What am I doing that is incorrect? I just cannot get the bottm row of choices that appear on the "Flash Mode" screen (full, 1/4. 1/16. 1/64) to light up. Rotating the control dial cycles through the four choices on the first two lines, but never illuminates the choices in the third line. I have the mode dial set to M, iso to 100, focus to S-AF. and flash set to on (no red eye, no slow curtain etc.).

Posted by on

  • David Cuge;; Jul 21, 2008

    olympus e-500. I couldn't find a way of adding that inormation to my inquiry which is carried over from an earlier request.

  • David Cuge;; Jul 22, 2008

    Could anyone please respond?

×

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 105 Answers

Try to reset the camera and check

Posted on Jul 21, 2008


  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 13,433 Answers

Brand and model of our camera?

Posted on Jul 21, 2008


  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 1,894 Answers

There are three flash modes in cameras..

what is your model number sir?

Posted on Jul 21, 2008

  • dewan nafees ahmed Jul 21, 2008

    camera menus differ from camera to camera.

    so please tell me your model number and make. this will help me guide you in the right path in solving your problem.

    thanks in advance


  • dewan nafees ahmed Jul 21, 2008

    i think you are using nikon D series.

    if yes please see this link.

    you get the idea about your problem.


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to make a recovery disk for a gt5622 vista


Restart your computer repeatedly tapping the f8 key to enter safe mode while the screen is black once in safe mode where the only things working will be your keyboard and mouse allowing you to attempt to repair your computer

If done properly the user should get to a screen similar to the below screen.

Select the option for Safe mode command prompt only

Windows Advanced Options Menu
Please select an option:

Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt

Enable Boot Logging
Enable VGA mode
Last Known Good Configuration (your most recent settings that worked)
Directory Services Restore Mode (Windows domain controllers only)
Debugging Mode

Start Windows Normally
Reboot
Return to OS Choices Menu


Use the up and down arrow keys to move the highlight to your choice.


Select safe mode with command prompt then type in chkdsk/f/r which will scan for and and attempt repair of bad files and bad sectors on hard drive


You should have no input while chkdsk utility is in progress any input might further damage your computer also


Use the System File Checker tool (SFC.exe) to determine which file is causing the issue and then replace the file.


Type the following command and then press ENTER: sfc /scannow The sfc /scannow command scans all protected system files and replaces incorrect versions with correct Microsoft versions.

or


http://neosmart.net/blog/2008/download-windows-vista-x64-recovery-disc/


vista recovery disk
not longer free


http://systemdiscs.com/?utm_source=neosmart&utm_medium=article&utm_campaign=Vista_Recovery


Hope this helps.

Nov 25, 2012 | Gateway GT5622 PC Desktop

Tip

ERVICE MODE AND POWER SUPPLY CIRCUIT


SERVICE MODE AND POWER SUPPLY CIRCUIT

Purpose: To bring the color adjustment of each component into standard alignment.

Symptom of Misadjustment: If this adjustment is incorrect, component signals do not reproduce the corresponding color.
1. Input 1080i 100% Color Bar signal.
2. Enter the service mode.
3. To enter the Auto Calibration adjustment mode, press [6] button on service the remote control unit.
4. To start auto adjustment, press [1] button on the service remote control unit.
- In the auto adjustment mode, "Please wait" appears on the screen.
- Upon completion, "OK" appears on the screen.

TO KNOW MORE CHECK THE LINK BELLOW
http://electro-medical.blogspot.in/
google.com/+AjinGopakumar


on Feb 18, 2015 | Emerson Used Original LC195EM82 Remote...

1 Answer

Installing Windows 7 from a flash drive. " $WIN_NT$.BT\biosinfo.inf could not be loaded. The error code is 14 ". Pretty sure it's not an error on the flash drive seeing as how I have used it succe


Click start control panel administrative tools computer management then select event viewer this may vary depending on what operating system you have

extend the events there you will see errors in red you will no what exactly what the error was and at what time it occured

or click start type in event viewer press ENTER

you might be able work your way through the problem.

Restart your computer repeatedly tapping the f8 key to enter safe mode while the screen is black once in safe mode where the only things working will be your keyboard and mouse allowing you to attempt to repair your computer

If done properly the user should get to a screen similar to the below screen.

Select the option for Safe mode command prompt only

Windows Advanced Options Menu
Please select an option:

Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt

Enable Boot Logging
Enable VGA mode
Last Known Good Configuration (your most recent settings that worked)
Directory Services Restore Mode (Windows domain controllers only)
Debugging Mode

Start Windows Normally
Reboot
Return to OS Choices Menu


Use the up and down arrow keys to move the highlight to your choice.


select safe mode with command prompt then type in chkdsk/f/r which will scan for and and attempt repair of bad files and bad sectors on hard drive


you should have no input while chkdsk utility is in progress any input might further damage your computer or


Use the System File Checker tool (SFC.exe) to determine which file is causing the issue and then replace the file.


Type the following command and then press ENTER: sfc /scannow The sfc /scannow command scans all protected system files and replaces incorrect versions with correct Microsoft versions.


Hope this helps.

Nov 17, 2012 | Dell Computers & Internet

1 Answer

WINDOWS XP PRO CAN`T RUN SHELL32.DLL,CONTRL_RUNDLL WSCUI,CPL


Restart your computer repeatedly tapping the f8 key to enter safe mode while the screen is black once in safe mode where the only things working will be your keyboard and mouse allowing you to attempt to repair your computer

If done properly the user should get to a screen similar to the below screen.

Select the option for Safe mode command prompt only

Windows Advanced Options Menu
Please select an option:

Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt

Enable Boot Logging
Enable VGA mode
Last Known Good Configuration (your most recent settings that worked)
Directory Services Restore Mode (Windows domain controllers only)
Debugging Mode

Start Windows Normally
Reboot
Return to OS Choices Menu


Use the up and down arrow keys to move the highlight to your choice.


select safe mode with command prompt then type in chkdsk/f/r which will scan for and and attempt repair of bad files and bad sectors on hard drive


you should have no input while chkdsk utility is in progress any input might further damage your computer or


Use the System File Checker tool (SFC.exe) to determine which file is causing the issue and then replace the file.


Type the following command and then press ENTER: sfc /scannow The sfc /scannow command scans all protected system files and replaces incorrect versions with correct Microsoft versions.


or

Use an external memory device such as a DVD, flash drive or external hard drive to back up the data you need to save from your eMachines computer.

Any data that isn't saved to an external source will be erased when the computer is restored to factory settings.



Remove any discs that are in the optical drive and unplug the computer's peripheral devices, such as an Ethernet cable or scanner.

Do not disconnect the keyboard, mouse or monitor.



Click the Windows "Start" menu and choose "All Programs."

Navigate to "eMachines" and choose "eMachines Recovery Management."

Click the "Restore" tab.


Click "Password Settings" if you have not already set a recovery password.

Type a new password in the text box and click "OK." Click "Restore System to Factory Default."


Type the recovery password and click "OK." Click "Next" to wipe the eMachines computer's hard drive and begin the recovery process.


Select "Finish" and wait for the eMachines computer to restart.

Use the series of installation prompts that appear on the screen to create a new user account for your operating system, set the system date and time, and set up your Internet settings.


hope this helps

Oct 14, 2012 | E-Machines W6409 (7234) PC Desktop

2 Answers

Pixelation in full screen mode with connection of laptop to hdtv via hdmi


Try changing the laptops resolution in the Control Panel. Click Start/Control Panel and look for Display or Appearance and Personalization. Click the Settings tab and increase the screen resolution and see if that helps.

May 06, 2012 | Computers & Internet

1 Answer

Pen for Intuos 3 hesitating with a pressure "ring" appearing after each tap of the pen. Lost hard drive, had to re-install and set up again. After setting up again, noticed this strange behavior. Tried...


I hope this doesn't sound stupid. Have you tried going into the settings for the tablet, and changing them around. It should give you a choice whether you want the mouse finder 'ring'. And give you a choice what you want for the pen pressing, buttons, and more.

May 17, 2010 | Wacom Intuos3 Graphic Tablet

1 Answer

I bought a Sony DSC t700 approximately 6 months


If the built-in flash does not function, then the camera may be set to Auto and will only flash when taking pictures in poorly illuminated environments.
To set the camera to the Forced flash setting so it will flash regardless of the surrounding brightness, press the UP ARROW on the control button until a lightning bolt icon appears on the LCD screen.

If the Forced flash setting is already enabled and the flash is still not working, then the issue may be due to another camera setting. Even if the Forced flash setting is enabled, the flash will still not work in the following circumstances:
When shooting MPEG movies
When set to the Twilight mode
If an external flash is connected
If in the Burst or Multi Burst mode

Please touch the MENU option on the screen of the Camera.
Then, select the REC MODE under the MENU.
Then, select NORMAL under the REC MODE.

If you're not able to select the NORMAL under the REC MODE, try Initializing the Camera.

First, please touch the HOME on the LCD screen of the Camera.
Then, select the SETTINGS in the HOME menu.
Then, select the MAIN SETTINGS under the SETTINGS.
Then, select the Initialize under the MAIN SETTINGS.

If the issue still persists after performing the troubleshooting steps provided above service of the Camera is required.

It's required to physically examine the Camera to determine the exact issue at the service center.





Jun 16, 2009 | Sony Cyber-Shot DSC-S40 Digital Camera

1 Answer

No flash on Olympus C-740 Ultra Zoom


This does appear to be a settings problem...
On the 710, there are a number of settings combinations that will result in the flash remaining off.
Here are some that I can think of :

> If the camera is set to "Super-Macro", the camera will not allow you to turn on the flash.
> If you are shooting using any of the scene modes, watch out, because several of these can set the flash to "off", and may not allow you to override that setting. Try exiting "Scene" mode, and try setting the flash.
> If you are shooting using the "Guide" mode, be aware that several of the options there will set your flash to "off". But (in my experience) you usually can override "Guide" mode's flash settings.

This one is important>>> If you are shooting in the "Auto" mode, the camera will always decide whether to flash, and you can not alter its decision. The way to escape this tyranny is to shoot in the "Program Auto" mode. This setting is not located in the same place as all the others, at least it is not accessed in as direct a way. Try this :
>>With the mode selector switch (dial) positioned to indicate the picture of the little camera (and with power on), press the "OK" button in the middle of the 4-way controller. Now you can see the "Shooting" menu.
>>Use the bottom (down) part of the 4-way controller to scroll through the options...you are looking for the one that gives you a choice between "P" and "AUTO". Stop scrolling when that location is highlighted. Now you can use the right or left parts of the 4-way to select between the "P" or the "AUTO". Be patient here, as the camera's shift from one setting to the other can be sluggish, and if you press the button just fast enough, it will appear that no change is taking place. Be sure to select "P", and press "OK" again. Now you should have regained control of your flash settings...but to exercise that control, you will, of course, have to be in normal shooting mode (the picture of the little camera), and press the right side of the 4-way controller to open up the flash settings screen. There, use the 4-way controller and the "OK" button to make your selections. Consult your manual for the meanings of the symbols.

If it is not one of these, it may be still be a combination that I haven't listed...or it may be something more serious. I hope this helps, and good luck!

Dec 25, 2008 | Olympus Stylus 710 Digital Camera

2 Answers

Mario cart will not recognize my second remote.


Another possibility is that the original poster did not push the "+" button on the main remote when on the screen in Mario Kart to register additional remotes.

This happened to me. I was holding down the 1 and 2 buttons over and over on the second remote, watching the blue lights flash, but the remote wouldn't register. Eventually someone noticed the instructions on the screen to push the "+" button. When you push the "+" button, another screen appears to let you really register additional remotes.

In Wii Sports, there is no pushing of the "+" button to register new remotes... I had incorrectly assumed it worked the same way in Mario Kart and didn't bother reading the on-screen instructions.

Dec 24, 2008 | Nintendo Mario Kart (Wii) for Wii

1 Answer

Flas Control Olympus E-500


i think you are posting the same problem again?
please check

Jul 22, 2008 | Cameras

Not finding what you are looking for?
Cameras Logo

Related Topics:

1,529 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cameras Experts

kakima

Level 3 Expert

102366 Answers

Steve

Level 3 Expert

3287 Answers

yadayada
yadayada

Level 3 Expert

74311 Answers

Are you a Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...