Question about Dynex DX-UC104 (DXUC104) Serial Adapter

1 Answer

NEED DRIVER FOR USB PORT TO 9 PIN PLUG

I have a Viewsat Xtreme VS2000 satellite receiver. I had to restore my computer to factory and lost the driver I needed to load from computer the files needed to update the satellite receiver. I am told Dynex driver is needed to be loaded so I can do this. Can you help me?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,605 Answers

Here is the website for driver download.
since you did say what Dynex card is, you have to do it.
http://www.dynexproducts.com/t-drivers.aspx

Posted on Oct 31, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hi! What cable/adapter should I buy so I can use foot pedal in my laptop using USB? Foot pedal is 9-pin, used for transcription. Thank you.


Hi,

The following link should meet the requirements assuming your existing cable is defective.

http://www.monoprice.com/products/product.asp?c_id=103&cp_id=10311&cs_id=1031104&p_id=2276&seq=1&format=2

Feb 28, 2011 | Sabrent USB to Serial (9-pin) DB-9 RS-232...

1 Answer

I have an Sam4 ER600 which is 9 pin seriel and only USB on my computer. I have got the recommended adaptor and software but my computer still doesn't recognise it... It says port failure. Can someone...


Buy an Athen usb-->Rs232 adaptor and install the program.. then go to hardware settings and set that usb port to Serial port 1 (very important)

After that you just start the program, opens your store @ port 1 and programs..

Jul 27, 2010 | Samsung Serial Adapters

1 Answer

Hai mr.igot problem when i install usb bf-810 iwas isntal driver but when i plug the port inthe PC it's show"USB devivice not recognice"can u solve my problem


Before you start installing the driver, please don’t plug your USB TO Serial Adapter into the USB port of your computer.  Follow the steps below to install Windows® 98 or Windows® ME driver 5.1 Turn on the power of computer and make sure the USB port is enabled and can working properly. 5.2 Insert the driver of USB-SERIAL ADAPTER into CD-ROM drive. Select “Install Products - USB-SERIAL ADAPTER - Install”. 5.3 Select the “Next” to install.
Before you start installing the driver, please don’t plug your USB TO Serial Adapter into the USB port of your computer.  Follow the steps below to install Windows® 2000 driver 6.1 Turn on the power of computer and make sure the USB port is enabled and can working properly. 6.2 Insert the driver of USB-SERIAL ADAPTER into CD-ROM drive. Select “Install Products - USB-SERIAL ADAPTER - Install”. 6.3 Select the “Next” to install.  Before you start installing the driver, please Don’t plug your USB TO Serial Adapter into the USB port of your computer.  Follow the steps below to install Windows® XP driver 7.1 Turn on the power of computer and make sure the USB port is enabled and can working properly. 7.2 Insert the driver of USB-SERIAL ADAPTER into CD-ROM drive. Select “Install Products - USB-SERIAL ADAPTER - Install”. 7.3 Select the “Next” to install.
.1 Driver Installation (MAC OS X) 8.1.1 Power on your computer and make sure that USB port is enabled and working properly. 8.1.2 Insert the USB adapter software driver into CD-ROM driver. 8.1.3 Click "USB-SERIAL ADAPTER\DRIVER\MAC\OS X " folder run on "PL2303_1.2.1r2.dmg", it will auto run the program and appear "PL2303 driver" folder in the desktop. 8.1.4 Click on "PL2303 driver" folder , execute "USBSerialOSX1.0.9b6.pkg" will auto install, you may change the driver directory that you want to install. 8.1.5 System will demand restart computer. 8.1.6 Plug in the USB-Serial adapter into USB port. 8.1.7 To make sure that your computer can use the device, you have check the "Apple System Profile"-"Device and Volumes". It will show the USB Device.It will show in USB port "USB-Serial Controller". 8.2 Driver Installation (MAC OS 8&9) 8.2.1 Power on your computer and make sure that USB port is enabled and working properly. 8.2.2 Insert the USB adapter software driver into CD-ROM driver. 8.2.3 Click "USB-SERIAL ADAPTER\DRIVER\MAC\OS_89" run on "PL2303_OS9_v136b1.hqx",it will auto run the program and appear "ProlificUSBSerial" file. 8.2.4 Copy "ProlificUSBSerial" file into "system folder"-"Extension". 8.2.5 Plug in the USB-Serial adapter into USB port. 8.2.6 To make sure that your computer can use the device, you have check the "Apple System Profile"-"Device and Volumes". It will show the USB Device.It will show in USB port "USB-Serial Controller". Follow the steps below to install driver of USB-Serial adapter:
hope that helps you

May 29, 2010 | BafoTech BAFO BF-810 Serial Adapter

1 Answer

Lost install instructions for Hi-speed usb 2.0 5-port PCI card.


The drivers are here. You shouldn't need to do anything to install the card other than plug it into a PCI slot in your computer and install the drivers.

Hope this helps. Thanks for using Fixya!

Feb 19, 2010 | Belkin Hi-speed USB 2.0 5-Port PCI Card [...

1 Answer

Pci card doesint work


What you want is a USB hub.  That will allow you to connect more than two USB devices to your computer.  There are two types, USB 2.0 and USB 1.1.  USB 1.1 will work for most slow speed devices, USB 2.0 is better for cameras and hard disks that have the support.  You should confirm which version of USB your computer has, but you should be OK getting a USB 4-port hub, plugging that into your computer, then plugging your keyboard and mouse into the hub and using the other port for the new peripheral that you wish to install.  Old PCI cards are problematic because you need the correct drivers.  You also need to make sure you plug them into the proper PCI port.  It sounds like the device you got from e-bay might be bad, so you shouldn't continue to use it.  If you post the make / model of your computer we might be able to suggest a new PCI card that will work if you still want to add more ports to your computer.

Apr 21, 2009 | VIA Vectro VT6212 (A62124) Serial Adapter

1 Answer

I need sabrent usb to serial converter drivers.The disk I received with my parches does not load!?


Try searching the following page
http://www.sabrent.com/#itemName=&itemID=0&section=Drivers

Feb 20, 2009 | Sabrent USB to Serial (9-pin) DB-9 RS-232...

1 Answer

Driver needed


I found my disc. Problem solved. Thanks for follow-up.

Jan 11, 2009 | Sabrent USB to Serial (9-pin) DB-9 RS-232...

1 Answer

Transfering files via a serial cable from vista computer to satellite receiver


to make this work we will need a ton more information from you..let us start with models of the other devices

Oct 13, 2008 | VIA Serial Adapters

1 Answer

Belkin USB/adaptor


Google Franson GPS GATE this little software utility is what you need

Mar 31, 2007 | Belkin USB/Serial Portable Adapter...

Not finding what you are looking for?
Dynex DX-UC104 (DXUC104) Serial Adapter Logo

Related Topics:

272 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dynex Serial Adapters Experts

Mike McWhinney

Level 3 Expert

537 Answers

Sudeep Chatterjee
Sudeep Chatterjee

Level 3 Expert

3267 Answers

Brad Brown

Level 3 Expert

13530 Answers

Are you a Dynex Serial Adapter Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...