Question about Dryers

1 Answer

Creda tumble dryer repair

I am trying to replace a drive belt on a Creda T601Cw tumble dryer. How do I get the belt onto the the drive shaft?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,462 Answers

With great difficulty - these belts are so tight!there is a special tool for doing it but there are other ways
one way i have used is to make a spanish windlass from belt to bottom of machine. when belt is level with motor spindle, push belt on and release spanish windlass. could also try levering belt on with a screwdriver
another method is to get a short piece of tubing that will fit over motor spindle. put belt over tube, lever down and slip belt on. this is the best way

Posted on Jul 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to put belt on hotpoint dryer


Dryer Belt Replacement - YouTube

? 6:23
https://www.youtube.com/watch?v=dFB4vnmADh0
Jun 20, 2011 - Uploaded by Repairs101
How to do-it-yourself instructional on changing the drive belt on an electric ... She wanted to know about replacing the drive beltin her clothes dryer. ..... How to replace tumble dryer beltHotpoint, Indesit, Ariston, Creda, Proline ...

How to replace tumble dryer belt Hotpoint, Indesit, Ariston ...

? 9:36
https://www.youtube.com/watch?v=kNJGHyEPiJA
Jan 30, 2014 - Uploaded by how-2-repair.com
How to replace tumble dryer belt Hotpoint, Indesit, Ariston, Creda, .... to get right and the grooves correspond to the drive, so really obvious..

Dryer Drive Belt (part #WE12M29) - How To Replace ...

? 5:14
https://www.youtube.com/watch?v=ZXSJlWcZPiY
Oct 25, 2013 - Uploaded by AppliancePartsPros
Buy the new Dryer Drive Belt WE12M29 ... to replace the Dryer Drive Belt WE12M29 on GE, Hotpoint, RCA, Sears, and Kenmore dryers.


Jan 01, 2016 | Hotpoint Dryers

1 Answer

Creda T601CW 6Kg Advance Condenser Dryer The belt


Creda I don't know from. Sorry

Nov 20, 2011 | Dryers

1 Answer

How do i change the element in a t522vw creda dryer


http://www.ehow.com/how_2087872_replace-belt-creda-tumble-dryer.html

May 28, 2011 | Dryers

1 Answer

I have a Creda 37374 Tumble Dryer and the belt has snapped. ive managed to get to the insides of the machine but how do i replace the belt as it looks as if it came off two pulleys next to the motor and...


remove the timer knob and you`ll see a small screw. remove that and the from control panel should slide upwards. once thats off you will see two metal rods/arms which fit onto the rear and the front of machine. remove the 2 screws holding the 2 rods/arms. the front of the machine can now be moved forward enough to get the belt over the drum. when the belt is over the drum, place belt onto the motor drive shaft (ribbed part of belt to ribbed pulley) then put belt between the sprung rollers and onto both rollers. make sure drum is then re aligned onto the bearing sliders on the front panel of machine. fasten back up. job done.

Jan 20, 2010 | Dryers

2 Answers

How do I replace the belt on my Creda T620CW tumble drier


most credas you need a stretch tool to stretch the belt from drum to motor if there is no jockey pulleys good luck.

Sep 14, 2009 | Dryers

1 Answer

How to fit a belt to a creda tumble dryer


open case
loop belt around bits
close case

more particularly

Unplug dryer
pull dryer away from wall
remove 1 screw each side at back of top plate
slide top plate backwards and lift off
undo 1 screw each side of front kickplate
tlit front panel up
unplug door switch
set front panel aside
careful of control panel its V.fragile
(I lay the dryer on its back)
pull out old belt and bits of belt
loop new belt round drum at wear marks
pull tensioner to end of travel against spring
loop belt round motor pulley & both tensioner wheels(most creda) 1 wheel (old)
relax tensioner
rotate drum by hand to make sure belt wont jump off

reassemble in reverse order
creda uses hotpoint parts

Oct 30, 2008 | Dryers

1 Answer

Creda t602cw condeser tumble dryer


how do i replace the belt? i'm having a hard time just getting the back of the dryer off!

May 18, 2008 | Maytag Atlantis MDE6400AY Electric Dryer

1 Answer

Tumble dryer Creda Smplicity T320VW


I am an authorized servicer for Creda and I can explain how to remove the front panel to change the belt. Email me at starztruck4u@aol.com if you still need help.

Mar 18, 2008 | Dryers

2 Answers

Drum wont turn on my creda t622cw tumble dryer


my tumble dryer drum wont go round

Nov 15, 2007 | Dryers

Not finding what you are looking for?
Dryers Logo

Related Topics:

622 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...