Question about Technics Audio & Video Receivers

1 Answer

On my sl 1200mk2 turntables my power switch is not working

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,071 Answers

Desolder the switch from the board and clean it, brush it by using an old toothbrush with denatured alcohol and resoldered it again ,If still not working ,change it with a new one .Still not working then the problem is in the power supply section ,maybe blown fuse,or defected regulator transistor,or dry up capacitor.,try check this all..so it will work again..

hope this may help;

Don't forget to rate; thank you..

Posted on Jul 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need needle for SL-D1 turntable


You may want to try here: http://www.needledoctor.com/Online-Store/Panasonic-Technics

Mar 02, 2015 | Panasonic Turntable Dust Cover Technics Sl...

1 Answer

Need a needle for a TECHNIC SL-3350


It's 'TechnicS' and 'stylus'. Wouldn't a web search have been faster?

"TECHNIC SL-3350 stylus"

But even 'technic" and 'needle' would have worked.

http://www.lptunes.com/Technics-SL-3350-turntable-stylus-replacement-p/tstsl3350.htm

Sep 01, 2011 | Technics Audio & Video Receivers

1 Answer

Can I attached a turntable to a Technics SL-DV290 CD Player .If so how, Thanks


Only if the turntable is preamplified or you get a phono preamplifier for it or run all of it through a receiver that supports the turntable.

Google it.

Jun 29, 2011 | Technics Audio & Video Receivers

1 Answer

Where can I purchase a Technics SL - B2 turntable belt? John Maxwell


try MCM electronics supply. (MCMelectronics.com) You might have to buy a kit of assorted belts or ten belts. MATelectronics is another supply house.(matelectronics.com) or google SL-B2 turntable belt.

Jul 28, 2010 | Audio & Video Receivers

1 Answer

Technics turntable plays but no sound with Sherwood receiver


The problem is the fact that the new receiver has no phono input. The phono input has an extra stage of amplification built in. Your receiver is working fine. You need to purchase a phono pre-amp. These run around $20. Connect the turntable to the preamp and the presmp output to any line level input on your new receiver and everything will work as expected.

Dan

Apr 12, 2009 | Sherwood RX-4103 Receiver

1 Answer

Connecting a Technics SL-BD20D turntable to a Yamaha RX-V463 Rece


After further research, I learned that I need to plug the turntable into a preamp before plugging it into my newer receiver. As with cassettes, record players are fading away. I ordered a preamp, but won't be able to experience success until it arrives.

Jan 16, 2009 | Yamaha RX-V463 Receiver

1 Answer

Seeking compatable receiver for my Technics SL-QD35 turntable... what is the original? Will another be compatable?


I think I understand what you mean by matching receiver, but turntables and hi-fi in general is modular. This was sold as a single piece. You can hook it up to any receiver that has a phono input.

Or you can buy a separate phono stage and a separate power amp. See what I mean by modular?

I would goto a site like audiokarma and look through the amp forum. There are lots and lots of threads discussing the purchase of which amplifier.

Nov 29, 2008 | Audio & Video Receivers

1 Answer

I picked up a technics SL-1100A turntable it is missing the power supply transformer. i require a schematic, or, can you tell me the ac voltage required to operate the unit. my guess is somewhere between...


Hi - I got the manual for the SL-1100 (which I guess is close enough) from the following site:

http://www.vinylengine.com/

It has a schematic:

56ad242.jpg

So your guess of 18 volts was spot on!

Please take a moment to rate this solution & let us know if the information given was useful to you - Good Luck!

Informatica

Sep 06, 2008 | Technics Audio & Video Receivers

1 Answer

Technics sl-1200mk2, schematic


Hi - You can download the manual by clicking the link underlined in blue below:

sl-1200mk2

Please take a moment to rate this solution & let us know if the information given was useful to you - Good Luck!

Informatica

Sep 04, 2008 | Technics Audio & Video Receivers

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Technics Audio & Video Receivers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

 Grubhead
Grubhead

Level 3 Expert

4576 Answers

Are you a Technics Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...