Question about Zenith H27F36DT 27" TV

Open Question

Zenith Model H27F36DT Commerical TV Remote Control Problem

We have about 80 Zenith TV's here at our motel. Forty of them are the Model H27F36DT Commerical TV. It has the CAT-5 plug on the back. We are also using the Zenith Universal Remote (ZN110) here. Our problem is that we would like one code to work for all the TV's or at least one code for all the 40 new ones we just received. Our original 40 use the code 405. Some of the new ones use 701, while the rest of the new ones use 405. Is there any way to reprogram these new ones to either match the 405 code or at least make them all 701?

Posted by on

4 Suggested Answers

SOURCE: zenith model h27f36dt

no color

Posted on Mar 01, 2008

  • 10594 Answers

SOURCE: No Original Remote , Which substitute

Required remote for your TV is available HERE.

Posted on Mar 06, 2009

  • 100 Answers

SOURCE: Zenith Concierge H25W35DT 27"

The CORRECT answer is you must purchase a LP702 remote. Google it to find one to buy. You must unlock channels and program the channels fresh.
Some standard zenith remotes allow you to reset the tv by popping off the cover of the remote and pressing an unmarked button.

Posted on Sep 28, 2010

  • 2080 Answers

SOURCE: Our zenith H27F36DT televisions are

Try accessing the Service Menu to see if you can disable it from there.

Hold the MENU button down for about 5 seconds until the currently displayed menu disappears.
Then press 9 8 7 6, then ENTER.
There are two menus in the service mode. Use the MENU to toggle between them.
Press SELect until the item you want is highlighted, then the ADJ button (left or right) for the submenu or the adjustment.
Press SELect for the next item and MENU for the alternate menu. Press ENTER to exit the service mode.
If the first Service Menu access procedure does not work, try the following:
On the TV itself, press the MENU button until the displayed menu disappears.
Then press ADJUST RIGHT and CHANNEL UP at the same time.

Good luck.

Posted on Jul 15, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Can I do a Factory default reset on a Zenith Concierge Series H2530Y7 Model Television without the remote control?

ZENITH SC652 Concierge Commercial TV Remote Control buy a master remote then,

  • Press the "Power" button on the Installer's remote control to turn on the TV.
  • 2 Press and hold down the "Menu" button on the remote for about six seconds until the menu disappears.
  • 3 Press the "9," "8," "7," "6" and "CC" buttons in succession. This resets the TV to factory default settings

  • Read more :

    Apr 24, 2015 | Zenith Televison & Video

    3 Answers

    Burning smell

    Need the board locations of the parts your needing the info on. Such as cxxx or Rxxx stamped on the PC Board.

    Mar 05, 2008 | Zenith H27F36DT 27" TV

    1 Answer

    How do i auto prgram this tv.

    You should have a remote control to do an auto-tune function to this set. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand.They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
    To select a proper universal remote control, you should know about the number of digits to its set-up codes.There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices.After confirming this, check the sites linked here.Both the sites have set-up code list and set-up procedure to many popular brand remote controls.Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability?Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brandyou have.
    Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack.Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site this site too. Universal remote controls are available at most of the electronic spare part selling shops.

    Sep 18, 2014 | Zenith H27F36DT 27" TV

    1 Answer

    Lost my remote for my zenith tv model #H2530Y lists 2 remotes for the H2530Y. They do not have either of the original remotes in new condition. They have a used version of the Guest remote.

    They also have the substitute remotes for both. The substitute Master remote (which will program the TV) is here: . The available guest remote is here: . The substitute remotes should match all of the functions of the original equivalent remote.

    I hope this helps.

    Cindy Wells

    Apr 26, 2012 | Zenith Televison & Video

    1 Answer

    No Original Remote , Which substitute

    Required remote for your TV is available HERE.

    Mar 06, 2009 | Zenith H27F36DT 27" TV

    1 Answer

    I cannot reset the channels on my TV. It is the Concierge TV from a hotel. Will I need to buy a Zenith Remote from the store to do the channel programming. It says it is locked

    You have a hotel/motel model that cannot be programmed or any of the settings changed without a special Master remote. Sorry, doubt that you can buy one from the store, they are not sold to the public. Contact the hotel where you bought the set and try to get the model number for the remote from them. This is a different number than the model number of your tv.

    Dec 13, 2008 | Zenith C27A24T 27" TV

    2 Answers


    Try to auto program the channels

    Jun 12, 2008 | Zenith C27A24T 27" TV

    2 Answers

    H25W35DT Zenith Tv locked

    can you open set ups or main menu using your universal remote? if yes try to find presets, or auto program. if no, then you really have to secure the oiginal remote.

    May 31, 2008 | JVC AV-20220 TV

    2 Answers

    Zenith h32h38dt 32

    The "H" model Zenith TVs are hotel/motel sets designed that
    a roomer cannot access the menu feature. Your best bet would
    be to purchase a name brand universal remote which has the
    menu button feature or order an original Zenith master remote
    which would not require programming. Once you have a workable
    remote which will allow you to access the on-screen menus you
    should be able to program the channels.
    Hope this helps,

    Feb 27, 2008 | Televison & Video

    Not finding what you are looking for?
    Zenith H27F36DT 27" TV Logo

    Related Topics:

    166 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Zenith Televison & Video Experts

    The Knight
    The Knight

    Level 3 Expert

    69808 Answers

    matt martin
    matt martin

    Level 3 Expert

    1198 Answers

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17129 Answers

    Are you a Zenith Televison and Video Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides