Question about Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

1 Answer

Whirlpool Gold 1500 XTL dishwasher

Same problem as igsanders and ronmac...flashing "Cancel" light; can't seem to reboot.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 158 Answers

Try shutting off all power to the DW by going to your house's main fuse or circuit breaker box, and shut off the breaker or fuse that services the DW. Wait 30 seconds, restore power, and see if the CANCEL LIGHT clears. If not, you may have a probkrm only a repairman can solve.

Posted on Aug 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gold Quiet Partner lll. Why are lights flashing on normal, pots and pans, and cancel?


I had this happen and I was unable to cancel, so I believe I resolved it by flipping the breaker off, then back on, and it's been working fine for a several years since then. Your electric panel should have a separate switch/fuse for the dishwasher. Some have a plug under the sink, but most are "hardwired". Cheers.

Dec 26, 2015 | Whirlpool Dishwashers

1 Answer

Cancel light blinking


this normally indicates an error code, what is the make and model number? also which lights are flashing?

Oct 02, 2014 | Whirlpool Gold Dishwasher with Quiet...

1 Answer

Quiet partner whirlpool III gold reset


TRY A RESET CODE
Press the "Sani Rinse," "Heated Dry," "Sani Rinse" and "Heated Dry" buttons on the dishwasher's electronic control panel in quick succession to put the appliance in diagnostic mode.
Close the dishwasher door and engage the door latch.
Wait 10 seconds before pressing the "Cancel" button to reset the dishwasher.

Dec 18, 2013 | Whirlpool Gold Dishwasher with Quiet...

1 Answer

Why does it run part of a cycle then stops?


Sounds like filter needs cleaning out if blocked this will stop the machine working

Mar 10, 2013 | Whirlpool WDF750SAYM Gold Dishwasher

1 Answer

I have a whirlpool gold quiet partner III. The cancel drain button works but nothing else. If you press any of the button for a period of time the normal button flashes; nothing happens though. Any...


Try to reset the dishwasher by using this sequence of keys within 6-8 secs.

HiTemp/ heat Dry/ Hi Temp/ heat Dry/ Hi Temp / Heat dry.

If it works all lights should turn on. Press Cancel to exit.

I am assuming you have already tried to turn the mains power off and back on.

If still no difference, then the controller or the panel has packed up.

You can locate the parts from this site.

Mar 21, 2011 | Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

We washed the dishes and now the clean light is flashing. When we hit cancel it runs for 2 minutes and continues flashing, why?


Hello & Welcome to FixYa

Flashing clean light is reset by pressing two buttons in sequence 3-4 times, to reset your kenmore press these buttons in sequence:

High temp wash-heated dry-high temp wash-heated dry

Please get back to me if you have any other questions.

Kevin

Mar 08, 2011 | Whirlpool Gold 24 in. Built-In Dishwasher...

2 Answers

Control clean light keeps blinking and dishwasher will not function


Your dishwasher will do this as a safety in case the element is broken and feeding electrical current into the water. Sometimes just a false reading.

Reset your console by pressing: high temp wash, heated dry, high temp wash, heated dry

When all the lights are on you are set in diagnostic mode. Just hit cancel a you will be able to run your dishwasher as normal.
If this same light appears again then you have a bad element or thermostat.

Dec 06, 2010 | Whirlpool Gold 24 in. Built-In Dishwasher...

1 Answer

Dishwasher does not complete cyele


Sounds like you might need a new Start button.

Mar 15, 2009 | Whirlpool Gold 24 in. Built-In Dishwasher...

4 Answers

Whirlpool dishwasher not working


igsanders.. that is a heater fault code. toggle between heated dry and normal until all light light up . press cancel. now ensure door closes without striking cabinet and the unit is level. this fault normally has nothing to do with the heater but rather the nuetral to the door switch which it shares with the heater.it will now operate again.

Dec 05, 2007 | Whirlpool Gold 24 in. Built-In Dishwasher...

Not finding what you are looking for?
Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher Logo

Related Topics:

232 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you a Whirlpool Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...