Question about Bushnell Sportsman 4x32 Riflescope (4x32 mm)

1 Answer

How do I disassemble a bushnell scope? - Bushnell Sportsman 4x32 Riflescope (4x32 mm)

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 103 Answers

You don't if you want it to work right again as they are filled with nitrogen gas to keep them from fogging.

Posted on Sep 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to disassemble my bushnell sportsman rifle scopes coz i wnt to clean it


On my Bushnell scope I have an adjustable angle ring that will bring in the view, it is held in place with 1 screw. remove it and pull down towards the windage and elevation adjustment screws. There are 3 tiny phillips screws, remove them. Then unscrew the end of the Eye Peice end peice with the lens in it. inside on the outer edge of the main tube there is a locking ring that keeps the eye peice from unscrewing off, remove it and unscrew the entire eye peice. you are now ready remove the inner tube. Be careful here this is where you can damage the cross hairs and lose the leaf spring that maintains pressure against the windage and elevation screws. When you reassemble after cleaning and with the elevation screw at 12 o'clock and windage screw at 3 o;colck, the leaf spring will be in the 7 or 8 O"clock position, it just sits in there up against a little ridge inside, with the bow facing to the center. Back off the elevation and windage screws all the way so they don't block the inner tube from going in all the way. Once it is in adjust it so the cross hairs are orented correctly and put it back together. If you want to refill with Nitrogen remove the front lense and take to someone that fills tires with Nitrogen and inject the nitrogen into the scope, Quickly reinstall the front lens as nitrogen is about 3% lighter than air and if you take too long it will all escape.
This worked well for me. Good Luck and Happy shooting

Apr 27, 2011 | Bushnell Sportsman 4x32 Riflescope (4x32...

1 Answer

Tacky, sticky finish-how do I correct that ???


if its a cheepy from e-bay you cant,,,its all down to the kind of paint used,,it just hasent dryed yet

Jun 29, 2010 | Bushnell Trophy Multi-Reticle Red Dot...

1 Answer

Scope won't sight in


Yes, rim fire scopes can't be used on a stronger firearm as the recoil will alter the internal mechanism. I fought with scopes of all types for years until I bought a used Leopold, never finding a better one! Hope you can find one of those.

Dec 13, 2008 | Bushnell Sportsman 4x32 Riflescope (4x32...

1 Answer

15x45 eye piece


call bushnell@18004233537 for your nearest distributor good luck...larry@reichinstruments.com

Nov 19, 2008 | Bushnell Spotting Scopes

1 Answer

I have a chipped lens on the inside of the scope how do i get it fixed


this will need to be sent to bushnell for repair and they can be reached at 800-423-3537 option 1.

Jul 04, 2008 | Bushnell Sportsman 4x32 Riflescope (4x32...

1 Answer

Yesterday I purchased a Bushnell Banner 4-12 x 40mm scope and mounted it on my RWS model 48 air gun per the scope mount manufacturer's instructions. After shooting my gun 4 times the cross hair broke and...


Paul,

to me it sounds like you have unfortunately been the victim of a manufacturers defect. the unique thing about shooting spring based airguns like your RWS and my Gamos is the effect of the recoil. it's different from traditional cartridge rifles but will never really be sufficient to ruin your scopes especially a bushnell. For now i would try to return your scope to the store you bough it from if that is within their returns policy. if not call bushnell at (800) 423-3537


here is their repairs process to help you decide what to do

(Verbatim)

To send product in for repair, please follow these instructions:
* USA Purchases Only
INSTRUCTIONS TO SEND PRODUCT IN FOR REPAIR
Package your product securely and include your name, street address, a daytime phone number, your email address, and a brief description of the issues you want addressed. Insure your product for the appropriate dollar value and send it to:
BUSHNELL (US Purchases Only)
Attention either: Bushnell or **Bausch & Lomb Repairs
8500 Marshall Drive
Lenexa, KS 66214

When returning product for repair, please do not send the product cases, lens caps, mounts, or straps.
SHIPPING & HANDLING FEES
Send in a check or money order for shipping and handling made out to Bushnell in the amount of:

$15.00 for Telescopes
$10.00 for all other products

(California residents are excluded from paying shipping and handling payments for warranted items only)
--> REPAIR PROCESS
When your unit is received it will be assigned a repair number. After reading your letter, a technician will evaluate your unit to determine what repairs are needed and whether or not warranty coverage will be applicable. It is our option to repair or replace your unit. If your unit is NOT covered under warranty, an estimate for repair or replacement will be mailed to you.

You will have 20 days to respond, either accepting or declining the recommendation. If you accept the recommendation for repair or replacement you will need to provide payment. That can be in the form of a check, money order, or if you prefer, by MasterCard or VISA. If the repair or replacement is covered under warranty, you will receive no additional correspondence. Your repaired unit or a comparable replacement of equal value and function will be shipped to you via UPS within 3-4 weeks.

Apr 18, 2008 | Bushnell Sportsman 4x32 Riflescope (4x32...

1 Answer

Bushnell Sportview rifle scope wide angle 4x38 T4389 limited adjustment inconsistant results


Hello,
I had the same problem but was able to solve it by shimming the scope mounts with a thin piece of plastic. Put it under the rear to raise the sighting and under the front to lower. I still plan to buy my son a better scope.

Mar 02, 2008 | Spotting Scopes

1 Answer

Bushnell/tasco 302675ad-60mmf=900mm


The manual is here under "Generic Riflescopes". It is a .pdf file.
http://www.tasco.com/support.cfm

The Tasco site for Riflescopes
http://www.tasco.com/section.cfm?s=Riflescopes

Feb 22, 2008 | Tasco Golden Antler 3 - (9 x 40 mm)...

Not finding what you are looking for?
Bushnell Sportsman 4x32 Riflescope (4x32 mm) Logo

1,838 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bushnell Spotting Scopes Experts

mlasher

Level 1 Expert

15 Answers

ray gallant

Level 3 Expert

36340 Answers

Shawn Jackson
Shawn Jackson

Level 2 Expert

113 Answers

Are you a Bushnell Spotting Scope Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...