Question about Apex Digital AT2702 27" TV

4 Answers

Unlock apex tv model # AT2702

MY SCREEN IS BLANK - RED KEY AT BOTTOM LEFT SIDE OF SCREEN - HOW DOI UNLOCK IT PLEASE HELP!!!!!!!!!!!!!!!!!!!!!!!!!!! screen lock, blue screen red key in lower left hand corner

Posted by on

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,487 Answers

  • If you have a blank screen with a red key on the bottom left, simply press the (function or F) button and the mute button at the same time. This will unlock the screen and allow you to view the channel as desired.

  • If your TV asks for a 4-digit code or password please enter 3308 or 6688 to unlock the screen or reset any preset rating levels.

  • If you have a GT2011J or GT2011S Television, hold the (Display) button for 10 seconds, it will unlock the screen. If password or code is requested, try 3308 or 6688.
Hope that helps..........

Posted on Jul 20, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 319 Answers

Please try this:

On the remote hold down the (F) function key and press mute.

Posted on Jul 20, 2008

  • 1 more comment 
  • Brian Berndt
    Brian Berndt Jul 20, 2008

    Let me know when it is FIXED!

  • Brian Berndt
    Brian Berndt Jul 20, 2008

    Your screen is locked, so you must unlock it by using the remote!

  • amalia837
    amalia837 Mar 26, 2012

    Thank you Brian, I have a guesthouse, and 1 of the guests locked the tv I did as you said, and it worked THANK YOU SO MUCH!!!

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,071 Answers

Try this manual;

[PDF] AT M C T

Posted on Jul 20, 2008

  • LORETO LACARON
    LORETO LACARON Jul 21, 2008

    Try pressing the ( F ) button and the mute button at the
    same time on your remote control.


    Here's the link for the 2402s manual:



    http://www.retrevo.com/search/v2/jsp/dow...


  • LORETO LACARON
    LORETO LACARON Jul 21, 2008

    Pass Code Menu
    This menu allows you to change the access code for the Parental Guide
    functions of the TV set. Pressing the “Menu” key when Pass Code
    Control is highlighted. This will turn on or off the Pass Code function. With
    the Pass Code function ON, you can also change the Pass Code. Use
    the down arrow key to highlight “Pass Code,” then enter the new Pass
    Code using the numeric keypad. Press the left arrow key when finished.
    1. The factory default pass code of 6688 is also the override code, in case
    you forget your new pass code.
    2. The factory defaults have TV-MA and MPAA-X ratings blocked

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,427 Answers

1 try using the right and left arrow keys

Posted on Jul 20, 2008

  • 1 more comment 
  • Rishi Roshan Ali Jul 20, 2008

    or press the menu key

    then when it ask enter the code 6688

  • Rishi Roshan Ali Jul 20, 2008

    or

    pree and hold the function key

    then press mute

    release function key

  • Rishi Roshan Ali Jul 20, 2008

    hey any luck?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does anyone know how to unlock the region code for Thomson JL2313I DVD player


If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Search the site by type in this key phrase "How to unlock the region code"; in the search box at the top left of the display window, to get gathered related posts.

Jan 11, 2017 | Thomson Televison & Video

1 Answer

Hi, I turn TV on, loge screen comes on then it goes blank? Any ideas please


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electro-medical.blogspot.com/
To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board....

Jan 10, 2017 | Televison & Video

1 Answer

LG 55LM4600-UC LED TV I have was squirted with a squirt gun. Would replacing the t-con board fix this tv? Please read further details.


when water shorts out something it overloads a lot of other components so the best advice is to take it in for a proper diagnosis.
you just replace a board but another board is damaged it might just blow the board you replaced and that would prove nothing

Jan 09, 2017 | LG Televison & Video

2 Answers

Vertical lines on my plasma tv


If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Line faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Faults to all LCD & Plasma screen are similar, irrespective of its brand and screen size.
Search the site by type in the "BRAND NAME" of your device; (Exclude the model number), in the "Search box at the top right of the display window of the Homepage" to get gathered related posts

Jan 08, 2017 | Samsung Televison & Video

1 Answer

We have a jvc RM -C3400 tv which my kids key locked. My remote is broken is there any way I can unlock without a remote? If so how. Thanks


Without a remote control, you can't unlock it by using the front panel controls. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites.
http://electrohelponline.blogspot.com/
http://remotesearch.blogspot.com/
Universal remote controls are available at most of the electronic spare part selling shops. Visit some on-line sites too, which deals with electronic spare parts.

Jan 06, 2017 | JVC Televison & Video

1 Answer

My TV is locked due some technical error.So,please how can I unlock and use the TV? Thank you.


What make and model is it please?
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Jan 03, 2017 | Televison & Video

2 Answers

I have sound but no picture on my tv


This is a popular question. Most of the time you either need to make sure all connections are not loose or just need to turn off your tv and receiver and unplug. Wait for 1 minute then reboot.
I recommend this short video as it walks you through some diagnostics for other possible problems.
Repair TV With Sound But No Picture

Nov 24, 2015 | Luxor Televison & Video

1 Answer

How to unlock e.tv in mytv decoder and how to open scrambled channels in DStv?


How to unlock etv and scrambled channels on Mystrong Decoder

Nov 15, 2010 | Televison & Video

Not finding what you are looking for?
Apex Digital AT2702 27" TV Logo

415 people viewed this question

Ask a Question

Usually answered in minutes!

Top Apex Digital Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71117 Answers

Alan Timperley
Alan Timperley

Level 2 Expert

91 Answers

Jaime Hernandez

Level 3 Expert

2275 Answers

Are you an Apex Digital Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...