Question about Computers & Internet

2 Answers

Have Leadtek PX9800 GX2 on a Tyan S5397 Windows XP Pro X64. Not found at boot (long beep followed by two short)- no POST video from card or MB port, but operates when Windows boots. It appears OK in device manager. Can't get into BIOS without removing the card.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 667 Answers

Hi - one long and two short beeps is a video error. Is the graphics card you are using not the onboard graphics? Make sure you go into the BIOS and disable the onboard video. You should be able to change it to PCI-E if that's what your card is. If you have the onboard enabled and a seperate graphics card in at the same time, yhis is what is causing your conflict. Let me know what happens. If this solves your problem PLEASE rate this as fixed. Thanks.

Jeff

Posted on Jul 19, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,487 Answers

I think the video card is doing some conflicting on your system, so if you have a spare video card that you can try that will be better.

Hope that helps........

Posted on Jul 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Driver nvidia download


The following page contains multiple links to where you can get the Windows 2000 and Windows XP drivers for this card. For Vista, Windows 7 and 8, there are no drivers available, unfortunately.

http://forums.driverguide.com/showthread.php?t=55907

One of the links (XP driver) provided there is:

ftp://ftp.leadtek.com/entertainment_graphics/Drivers/041222/W2K_NVALL_41124.exe

Good Luck!

Oct 15, 2013 | Leadtek WinFast A340T GeForce FX 5200,...

1 Answer

Pc will not boot need to know the beep codes, to solve problem


all that typing and you still didn't list your motherboard make and model ?? different motherboards have different BIOS's and their respective beep codes are different for each

try looking in the BIOS and checking the video section for a PCI-e setting. sometimes it has to be set to look for a PCI-e card first, especially when the motherboard has on-board video.

Jan 08, 2013 | Computers & Internet

1 Answer

Tyan S2885 mb and graphics card Asus AH 4650


install agp drivers, ide drivers then video drivers

Feb 04, 2010 | Tyan Thunder K8W S2885 Motherboard

1 Answer

Tyan s2720 was working fine. cleaned fans and fiters then when I tried to boot up no bios and 7 beeps pause 7 beeps pause 7 beeps etc...


Hi:
Check and see if somehow your video card came unseated from the motherboard. sometimes just moving a tower around can pop them loose.

Nov 12, 2009 | Tyan Thunder i7500 Pro S2721UGN...

1 Answer

Possable failing bios or dead mobo


The Tyan MP boards do not support legacy USB. You have to use a PS/2 keyboard to get into the bios. If possible, I would clear the cmos by popping the battery out or finding the jumper to clear it. Then try to access bios again from ps/2 keyboard.

These boards also have compatibility problems with many video cards. Check Tyan's website for a list of supported cards if you are not using onboard video.

As long as the heatsinks are properly mounted on the CPUs with thermal compound, the fans are operating normally, and air is flowing through the system, the chasis that you run these boards in shouldn't matter.

If all fails, try removing pci devices, external peripherals and drives one at a time to try to eliminate possible causes.

Video card reference: http://www.tyan.com/archive/support/html/video_s2466.html
MB Manual:
ftp://ftp.tyan.com/manuals/m_s2466_120.pdf

May 01, 2009 | Computers & Internet

1 Answer

Having problems trying to get a Tyan i5000xt MB to allow the vid card to come up with a display


  1. If the MB has jumpers, you must make sure they match you CPU.
  2. Make sure you have the right memory modules and that they are installed correctly.
  3. Unplug all drive cables from the mother board (HD, CD, DVD, Etc) and then try to boot. If you see video, plug them back in one at a time.
Hope that helps...

Geno

Apr 02, 2008 | Tyan MBD SSIE DUAL XEON 5000 5100 1333FSB...

1 Answer

CAD station down


just reinstall the operating system(xp). once format the c: drive. due to the wrong connection of the usb this problem has occured. please install XP

Oct 03, 2007 | Gigabyte 8VM533M-RZ (GA-8VM533M-RZ)...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

100288 Answers

David Payne
David Payne

Level 3 Expert

14160 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...