a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Depending on how old your system is try
To set the system Time:
1. Press the SPK key.
2. Dial 828.
3. Dial two digits for the hour (24 hour clock, 13 = 1:00 PM).
4. Dial two digits for the minutes (00-60).
5. Press SPK to hang up.
press "CL" dial 828 0000 dial the 2 digits for the year dial the 2 digits for the month dial the 2 digits for the day dial the day of the week(0=Sun,1=Mon etc) dial the 2 digits for the hour dial the 2 digits for the minute press "SPK"
example "CL" 828 000 09 05 06 4 12 00 "SPK" would set Wed 6th May 2009 12:00
1- Press transfer
3-Enter passcode = (try 4321 or 1234)
5-Press the speaker btn
7-The display will show:
w=day of the week (1=Mon. - 7=Sun.)
mm=2 digit month
dd= 2 digit day
yy=2 digit year
time must be entered in military time
when done press Transfer
SET DATE AND TIME DISPLAY Should it become necessary to correct the date and time displayed on all of the keysets, due of time change (twice a year), you must first access the customer programs. To access customer programs, open system programming using the passcode you have been assigned. (Default passcode is 1234). You must use a (display phone) LCD 12B or LCD 24B keyset.ENABLE CUSTOMER PROGRAMMINGWhile on-hook, press TRSF and dial 200. he display shows.ENABLE CUS. PROG. PASSCODE:Dial the four digit passcode. The display shows:ENABLE CUS. PROG. DISABLEDial 1 or press the ▲ on the Volume to enable. The display shows:ENABLE CUS. PROG. ENABLEPress TRSF. The keyset returns to its idle condition. The display format is the following: W (Day of the week): Enter 0 for Sunday and 6 for Saturday. MM (Month): Enter 01 for January and 12 for December. DD (Day of the month): Enter a number in the range of 01-31 YY (Year): Enter the last two digits of the year. HH (Hours): Use the 24 hour clock and enter a number in the range of 00-24. MM (Minutes): Enter a number in the range of 00-59.SETTING THE DATE AND TIME1. Press TRSF and then dial the 505. The display shows: OLD: 1102802:0852 NEW: WMMDDYY:HHMM2. Enter the new time and date using the above format:OLD: 1102802:0852 NEW: 1102802:07523. Verify the time and date and reenter them if necessaryOLD: 1102802:0752 NEW: WMMDDYY:HHMM4. Press TRSF to store and exit programming. If you have entered invalid data, you will receive an [INVALID ENTRY] message for three seconds. Reenter the correct date and time. If the information you entered is incorrect, repeat steps 1 through 4.
At any phone without picking up the handset. Press transfer, dial 200, Passcode is 1234, press 1 again, then press speaker.
W MMDDYY 00:00
W=day of week (1=monday....7=Sunday)
MM=month in 2 digit
DD=day in 2 digit
YY=Year in 2 digit
Enter time in military time.
Press Transfer to finish
First, you have to Enable Customer Programming.
- With handset on-hook, dial #06. The display shows [MMC DISABLED].
- Dial the passcode and '1' and then dial #.
(If you don't know the password try 1234, 4321, 9999, etc.)
At this point, customer programming is open...
Next, Setting the date and time.
- Dial #55. Display shows [YY MM DD W HH MM].
- Dial new information as follows:
YY = Last two digits of the year
MM = Month (01-12)
DD = Day of the month (01-31)
W = Day of the week (1-7; week begins on Monday (1) and ends on Sunday (7))
HH = Hour (use 24 hour clock)
MM = Minutes (00-59)
- Dial # to set current date and time. The phone returns to normal use.