Neil Poulton La Cie HD is okay with WIN Xp with usb connexion. But I also have Win 98 (not SE) and USb connexion says it needs a driver. Where can I get the right one? Thanks a million...

THere are drivers for Windows Server 2008, Windows Home Server, Win 64-bit, Windows Server 2003, Windows Vista, Win Server 2003, Win Me, Windows XP, Win Server 2008 R2, Windows 98, Windows 98 SE

I'm not sure if theres is a drivers for Win 7 or Win 8 so if you don't have one you should install Windows Vista or XP driver using compatibility mode

to be honest you have more of a chance of hell freezing over, win 98 se although being the better out of the lot, you will never get the drivers for it, usb2 will never work with that os and it will never recognise the sata disk, you could try using win xp drivers for it, but i very much doubt you will get any response, your best bet would be to upgrade to xp...sorry its negative, but Microsoft stopped updates for 98 years ago...

Here is a WEBSITE in the UK that has USB driver for WIN 98 FE and WIN 98 SE.

Go guarantees. It has been my experience that eraly computer had USB 1.0 and would work with 2.0, but at 1.0 speeds.

Hope this helps.

good luck

If you installed SE on Win 98, then here is a link to a generic USB driver that should work with your HD. If at some point you decide to install a newer OS or go dual-boot, you can always partition the HD so you don't lose any storage. Best of luck.
Greg

http://www.technical-assistance.co.uk/kb/win98se-usb-mass-storage-drivers.php

if you remove the old one it should be labelled on the side of what its voltage is and just get the same as that one

Specs say it is compatible with Windows 98 SE. Also says no drivers are needed for it. Make sure your plug 'n play is enabled on your computer. Once it is enabled just plug the drive in & Win 98SE should install it. If it does not work then try a different usb port as maybe a port is bad. Hope this helps.

you will need the usb port drivers for windows 98 and the usb drivers for the printer as the earlier windows 98 had'nt the usb drivers included with operating system an as the new motherboards came about with usb ports then a new in 98 was needed to catter for this that's why you have win 98 first edition and win 98 se edition please chech that you have the driuvers installed for both parts to work.

good luck

hi, i srinivas, i am using dual booting of win 98 & windows xp operating systems. when i am using my transcend pendrive in win xp which is easily working, but in win 98, how can we install perpect drivers for my transcend pendrive.

so please give the solution to solve my problem.

try pen drive company's website

go to "tiger direct" and purchase a usb to usb interconnect cord. the software they supply will install an ansi and unicode driver so you can use two machines with win xp, win me or win 98. xp and me use the unicode driver while win 98 uses the ansi driver.