At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
CANT SEEM TO FIND A BULB +THE SQUARE BOX THAT ATTACHES TO THE BULB I BROKE THE STRIPS THAT COME OUT OF THE SIDES OF THE BOX+I BROKE A PIECE OF THE BOX ITSELF.WONDERING IF THE BULB,BOX,STRIPS COME AS ONE UNIT. THANK YOU
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
should imagine that the covers just either slide out or pop out ,if i could see it then i would work it out but iam a fella and i dont use these things sorry
I am thinking that the knobs and the lock have the same size of square metal shaft. You can try out a good hardware store for some square stock metal. This might be an easy fix. If the lock shaft size is actually smaller than the knob, you can cut some small strips of tin to shim the 4 sides of the shaft that goes into the knob.
joe
Access the headlight bulb from under the hood. There should be a clip (screw on or snap) holding the bulb in place. Carefully unplug the socket from bulb and remove clip and slide bulb out. Installation is reverse of removal. Be careful NOT to touch the glass surface of the new bulb, as the oils from skin can cause it to shatter when heated.
the light bulb is usually in cavity behind the control board.to access that first remove the outer cover of the unit by removing all screw at the back.after removing the cover u will have access to yhe cavity behind the cntrl board and the light bulb.....good luck.
Or, more helpfully, take them back out. Look in the hole, and you will notice that when you look through, the hole turns square. At the end the square, there is a little tab / square in one corner. It is generally *not* the same on both sides. You'll notice that the end of the piece you took out (the part that looks like a magnet) has one corner cut off -- so it's a rectangular box with one of the corners gone. Line up the missing corner of the piece you took out with the corner that has the little tab -- this allows the piece to get past the tab and be fully inserted. Reminder: check both sides, because they're not the same. And now, more helpfully, if you're curious, check out flea markets and get a broken Kitchenaid to take apart for $20 or so. Don't mess with your nice one. : )
Try this..At the driver's seat open your car door all the way then look
at the dashboard end. Pry off the plastic cover...the diagram should
also be at the back of the cover.
you can try pulling the middle piece up and keep it up while pulling the sides into place, they should lock and you shouldn't be able to push on they and have them collapes. After the sides are in place, push the middle piece down and that should do it.
×