Question about D-Link DCS-G900 Network Camera

1 Answer

Connecting via IP to canera

How do I connect to this camera? the manual instructions did not work

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 304 Answers

If you plan on accessing your camera via the Internet you may assign a domain name that's more memorable than your IP address with one of a number of Dynamic DNS online services.

You have to assign an IP address for the camera on your home or work address. This is what will allow you to monitor your camera from anywhere in the world where there is internet access. Next follow this link and find a service:

http://www.technopagan.org/dynamic/#TheList

This page has a list of almost all the dynamic DNS online service providers. Many of them are free or donation based. The ones that are free or donation based are more for people that have a strong grasp of the concept. The pay services provide priceless customer service if you are new to networking or net based video cameras. I suggest you sign up with one of the pay sites for a month and milk their technical support team. They have 800 numbers and experts that will set the whole thing up for you then you just cancel at the end of the month and switch to one of the free providers. I hope this sets you in the right direction. If you need more assistance with this or any other technical issues feel free to contact me. Please remember to rate me Fixya for this insider information.
Thank you
George

Posted on Jul 19, 2008

  • George Kohler
    George Kohler Jul 22, 2008

    If you can't read let me know and I will find another way to get the info you need to you. I'm pretty good at drawing cartoon type pamphlets to teach toddlers to make on the potty. Maybe I could make a picture book and you will find that more useful than a concise written answer.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Logitech quickcam web not connecting to pc Please help


Check Following Instructions:
1. Check your Cam properly conntected to the computer via USB.
2. Check Logitech quickcam drivers Install. - If not install from this website -
http://www.driverfiles.net/Cameras/Logitech/QuickCam%C2%AE-Express-Driver/download/page,sh,39397,444,17,.html

Apr 25, 2010 | Logitech Quickcam Web Webcam

1 Answer

How to communiocate with IP camera


first you try to ping the ip address of the camera.if you getting the replay that means it is working if it not then you have to chek ur lan setting.

Jan 14, 2010 | Panasonic BL-C1 Network Camera

1 Answer

Not showing the network ip address. Note i changed it from 192... to 172... and now trying to go back to the 192.168... network


Set the camera to "automatically obtain an IP-address".
Connect the camera, via an Ethernet network cable, to a router.
The router will supply a valid IP-address to the camera; much simpler than trying to "manually" set an IP-address, network-mask, and gateway IP-address.

Dec 08, 2009 | Veo Observer Network Camera

2 Answers

I have a PanasonicKX-HCM10 camera, it works ok on network but will not work on internet ,why?


check the firewall, see if is not blocking your webcam
if you have a router, enable port forwarding for webcam

usually webcam uses TCP port 5100 for yahoo messenger

Jul 16, 2009 | Panasonic KX-HCM10 Network Camera

1 Answer

Cant see snc rz30n, appear ip ip setup window, won't load page


Enable network and then give ip in the address bar of browser the home page will be browse.

Jul 11, 2009 | Sony SNC-RZ30N Network Camera

1 Answer

Problem with comp


yes u can disconnect the ethernet port to pc.or check wther it is connected via wifi

Jul 06, 2009 | Panasonic BL-C1 Network Camera

1 Answer

DCS-1000w through Dlink DIR-655 router


These cameras are touchy. Hold the reset button on the back in for about 20-30 seconds. Bring up the CD software you got with the camera, it should spot the camera right off and you can configure. That seems to be the only way I can communicate with this model. After setup, then browsers, etc seem to work fine. I would also download the latest Firmware and update.

Apr 12, 2008 | D-Link DCS-1000W Personal Web Camera

1 Answer

Need to change ip address for my camera


How is your webcam connected to your network? Is it connected to your PC or your router?

If it is connected to your router, go into the router settings and see if the router reassigned a new ip address to the camera. If you set the router up for DHCP, it will automatically assign IP addresses to all devices that are connected to it, as long as the individual devices are also set to dynamic IP addressing. Your router is set up for the 1.0 network, so your pc is most likely 1.2, while your router port connecting to your home network is 1.1.

Another thing you can do is make sure your webcam is turned on and go into 'My Network Places', then click on workgroup computers. See if the webcam is listed there.

Apr 11, 2008 | Toshiba IK-WB01A Network Camera

2 Answers

Setting NG


make sure you are using a crossover cable. A straight through ethernet cable will not work for talking with your computer. Next, go to your network connections. click on TCP/IP properties and enter in for the IP address 192.168.0.101 and a subnet mask of 255.255.255.0 apply it. go back to network connections and disable then enable your connection. Now go to the Sony IP setup program. Double click on your camera when it appears. Don't forget the default address of the camera is 192.168.0.100.

Jul 08, 2007 | Sony SNC-RZ30N Network Camera

1 Answer

Camera Not Working Wirelessly


I think maybe the problem is that the cam has already been recognised and given an ip address when you connect via RJ45 cable, but when you try wirelessly, there is a replication of the ip address which is not allowed. Check your router to see what ip address was given to the cam and remove if neccasary so as to re new the cam ipaddress. I would turn off the encryption first to try and get it working, then turn on again.

Feb 08, 2007 | Trendware TV-IP400W Network Camera

Not finding what you are looking for?
D-Link DCS-G900 Network Camera Logo

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Webcams Experts

micky dee

Level 3 Expert

2624 Answers

Geoff

Level 3 Expert

413 Answers

Shahzad  Waseem...
Shahzad Waseem...

Level 3 Expert

746 Answers

Are you a D-Link Webcam Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...