At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: How do I get the 'autoprint off' to go back to...
Receiving to Memory Temporarily You can enable memory receiving feature temporarily. 1 Press [ON/OFF] to select . z The fax starts receiving documents in memory. z To cancel, press [ON/OFF] again.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I will try to uninstall and then reinstall the print drivers. Then check the dial switch on the back of the printer, make sure it is set for Autoprinter.
G3 microboards printer won't intall in Windows
Problem with the MicroBoards G3 Autoprinter 50disc input USB 20 Surething Software for PC and Mac Includes A F DVDR Media
g3 microboards printer won't intall in Windows 7
Likely your paper is loaded incorrectly or is incorrect for the unit. The auto print format depends on the position of the black "que" mark in the paper, but the manual mode does not. Be certain that the paper is correct for you unit. If that isn't it, then you que sensor could be dirty or defective. THis would require shop level repair, as dis-assembly of the unit is required.
press the on/off button once.by holding the on/off button down it will switch the machine on or off,if you press the on /off button once it will switch between autoprint on or off
the autoprint which you r telling is called allignment page which your printer is printing everytime.just when the printer prints that autoprint you take that autoprint and place the printed side of the paper on the scanner glass and press the scan button.the printer ON/RESUME light will blink for 1minute then automatically stop and then u will not get this autoprint till u replace any of the cartyridge from the printer.
×