I asume U R talking about the Drain Hose?? As long as it doesn't get Kinked, I see no Problem.. I installed one yesterday the (25th) and the Drain comes out under the Dishwasher, so therefore, the Drain Hose has to be ran under the Unit.. No Problems !!! I hope this Helps U out...
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
most common faults with dishwashers is a drain fault. Check for any kinked hoses and check the drain spigot under the sink where the drain hose connects into the u bend. Usually this is where food gets trapped due to the spigot not being drilled out large enough. This then causes a blockage. Also check the non return valve under the filter and make sure the drain pump can turn freely. Hope this helps.
you need to adjust the door tension springs which is by a screw each side of the hinges on the plinth of the unit at the front. There is a symbol of a spring to show you which screws to release. do them evenly and the door will not spring up,
this is a general fault light which could mean anything without a Miele Technician coming out and connecting a laptop to the unit. However most common faults with dishwashers is a drain fault. Check for any kinked hoses and check the drain spigot under the sink where the drain hose connects into the u bend. Usually this is where food gets trapped due to the spigot not being drilled out large enough. This then causes a blockage.
Hope this helps.
You need to check the water valves and the inlet hose. Water valves as described in the owner manual for cleaning and maintenance, should be open fully and inlet hose is kinked. Clean them and let me know the results.
Also checkout the drain pump if not get clogged. This can be cleaned as described in the operating instructions.
Use the good quality detergent and clean it periodically.
Let me know if you face any difficulty or need further assistance I will help you out.
You could buy a no name door seal gasket from any dishwasher parts supplier but you will loose your warranty with Miele. And extended warranties reach up to 6 years if you bought it from a factory authorzed dealer with a factory authorized installion! Call Miele direct. Miele's number is 1-800-843-7231 If you would rather call your local Miele dealer, they'll be more than happy to do help you!