Replaced the convergence Ics and the tv had worked before and know it only comes on for about 2 to 4 seconds and shuts off with the power indicator blinking red three times. Please advise as any suggestions would be greatly appreciated
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You will need to replace both convergence Ics and the pico fuses that blow when the Ics fail. You can get the replacement Ics and pico fuses from www.tvreairworld.com they also provide free tech support to help you install them
Push the Flash Focus button on the tv remote don't work?Yes,the tv have a problems known as a convergence problems,it dead.Tv colors lines R,G,B mis alignment,have colors shadows pictures or 3D pictures.The tv convergence board the 2 STK convergence ICS and some or all it resistors are dead.These parts on the tv convergence board,must be replaced to solved the tv picture convergence problems.The shop,will cost u $300-350 for parts and labors.
Hi, All that mess in picture is due to failure of convergence output chips in this tv. Replace convergence output ICs (two ICs) to solve picture problem. Required ICs are available in Part Store, click the link to have price info. Thanks.
Convergence ICS are dead.2 convergence ICS must replaced to solved this problems.Know how to solders?Tries Tv repair World.com,Tvrepairkits.com to buy a convergence kit to repair it ur self.The shop will cost u $300 for parts and labors.
Convergence is dead.Must replaced 2 convergence ICS.U know how to solders?Buy a convergence kit at Tv repair World.com,Tvrepairkits.com to repair it ur self.The shop will cost $300 for parts and labors.
Ur convergence it dead.Must replaced the 2 convergence ICS.Know how to solders?Tries Tv repair World.com,Tvrepairkits.com for the convergence kit to repair it ur self.The Shop will cost U $300 parts and labors.
Convergence is dead.Know how to solders?Replaced 2 Convergence ICS and all it resistors.Tries Tv repair World.com,Tvrepairkits.com for the convergence kit.The shop will cost u $300 for parts and labors.
When convergence out ICs stop working in rear projection TV, picture looks 3D affects. Need to test/ check supplied volts on convergence out ICs on main board and if volts are OK, replace both ICs. I'm not sure if you are going to repair TV by yourself or will ask local tv tech to fix it. Let me know please. Thanks.
Yes you can get replacement IC STK392-110 convergence ICs at the following link and they provide free instalation instructions with pictures. The Ics are located on the board on the left side attached to a large heatsink. You will need to replace both ICs heres the link. http://servicemanuals.vstore.ca/