- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Harnesses are made for many vehicles. The harness you bought may fit another year model where the brown wire might be used. If you are not using this wire, just tape it up and secure it. It will be fine as long as everything is working on the stereo you have installed. good Luck.
1994 Jeep Grand Cherokee Car Radio Stereo Audio Wiring Diagram
Car Radio Battery Constant 12v+ Wire: Pink Car Radio Accessory Switched 12v+ Wire: Violet/White Car Radio Ground Wire: Black Car Radio Illumination Wire: Orange/Black Car Stereo Dimmer Wire: Green/Red Car Stereo Antenna Trigger: N/A Car Stereo Amp Trigger Wire: N/A Car Stereo Amplifier Location: N/A Car Audio Front Speakers Size: N/A Car Audio Front Speakers Location: N/A Left Front Speaker Positive Wire (+): Green Left Front Speaker Negative Wire (-): Brown/Red Right Front Speaker Positive Wire (+): Violet Right Front Speaker Negative Wire (-): Blue/Red Car Audio Rear Speakers Size: N/A Car Audio Rear Speakers Location: N/A Left Rear Speaker Positive Wire (+): Brown/Yellow Left Rear Speaker Negative Wire (-): Brown/Blue Right Rear Speaker Positive Wire (+): Blue/White Right Rear Speaker Negative Wire (-): Blue/Orange
google_protectAndRun("ads_core.google_render_ad", google_handleError, google_render_ad);
You should be able to get one at Wal-mart in the car audio section, at a car audio store, or even at some car part stores, just check the packages and make sure your car is listed on it. You may also need an install kit to go around the stereo to make it fit like its supposed to.
When connecting the power supply to a car stereo you have to make sure that the power cables are not connected directly to the battery. In most cases you have a red cable with a fuse holder with a bigger gauge yellow cable, also with a fuse holder. First things first. to get rid of the problem I would really advice to get a stereo wiring harness, which you can find at Wal-Mart or your nearest stereo install shop. Then what you want to do is go and buy a current tester from auto zone or auto parts store, or if on a very tight budget nearest dollar store current tester would do for this project. After doing that carefully remove the stereo. then look for your power cables coming from the car. When that is done carefully connect the matching wires and you should not get a battery drainage anymore. Hope this works for you.
CHECK IF YOUR STEREO HAVE IN THE BACK ,A CD CHANGER INPUT IS A LIGHT BLUE INPUT ABOUT TEN OR MORE PINS IN IT,IF ITS, GET AN AUXILIARY INPUT THAT CONECT IN THE CD CHNGER INPUT TRY TO GET IT IN A ELECTRONIC CAR STEREO SHOP.
No problem. All you need is your vehicle year and make and you have that. Go to Wal*mart or Target and get a wire harness adapter. Cost about 10-15 bucks. It's in the auto/stereo department. If you'd like to pay a little more then go to BestBuy. This adapter will allow your vehicle harness to plug into it and tell you where to connect the wires onto the wires of your Sony stereo. Very easy. Have a great day.
What type of stereo do you have? You can try and google that stereo name and put the words "wire connector, or adapter" after it and see what you come up with.. OR.. you may be able to go to wal-mart and check their department for adapters that may fit your stereo.