Question about JVC XV-N212 DVD Player

1 Answer

LOCK displayed on the dvd player

I can't get the LOCK function to disengage. I found the troubleshooter page online and tried to follow the directions. BUT it says to press 0 at the same time as pressing 7 on the player....problem....there is no 7 on the player! I need assistance! Thanks!

Posted by on

  • ilardo Nov 13, 2008

    I tried pressing 0 and 7 in various combinations on the remote control and nothing happens. Please--does anyone know how to get the disc tray lock function off? The DVD was working well but I had to unplug the inputs when I hooked the digital converter box. Now, the disc tray is locked.

  • ziv2 Feb 21, 2009

    let me know when you figure out how to unlock the lock feature on the DVD JVC player

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Though it may be different for different models, the JVC XV-N40 DVD Player LOCK can be disengaged (and engaged) by pressing the [EJECT] button while holding-down the [STOP] button. Yes, it's that simple but I had to search online to find it too. The XV-N212 did not appear on JVC's website when I looked for it there.

Here's a link to the material that coves with the player in the box:
http://resources.jvc.com/Resources/00/00/96/GNT0027-001A.pdf

Happy viewing to all!

Posted on Feb 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My Sony dvp sr500h will not let me eject the disc and it displays Locked on the scree. How do I unlock it ?


The Blue Ray is just like a CD or DVD player.
If you have a disk in the unit and it will not eject through your my computer, find a paper clip and streghten it to about one inch.
On the face of the player, you will find a small hole. Insert the paper clip in the hole until you find the step. Bush forward and the door should open.

May 22, 2014 | DVD & Blu-Ray Players

1 Answer

Wont read a disc


I found this troubleshooting guide at the support page:
http://support-us.samsung.com/cyber/popup/pop_troubleshooting.jsp?ia_cd=N0000071&model_name=BD-P1600

Try following each step until it can read a disc, and if none of them work contact their support at the bottem of the page.

Feb 05, 2011 | Samsung BD-P1600 Blu-ray Disc Player

1 Answer

Lock


Hi there,

The disc lock function has been activated on your JVC XV-N320, when in this mode the tray cannot be opened or closed.

If you press the 'eject' button whilst pressing down the 'stop' button on the machine in standby mode the disc lock will deactivate. To turn it back on you follow the same procedure. This is also described in the user manual for this model of TV umder trouble shooting on page 13.

Hope this helps,

James

Apr 23, 2010 | JVC XV-N320 DVD Player

1 Answer

The dvd player displays a big yellow box in the middle of the screen with PSCAN with an exclamation point above it. Also the screen is showing the right side with a wide split between them. This is the...


I found the manual for this dvd player online. There is a switch on the back of the player. PSCAN is Progressive Scan. Some TV's are not compatible with this function so the switch must be turned off. This worked and I was watching a dvd last night!

Nov 03, 2009 | Memorex MVD2042 DVD Player

1 Answer

DMR-ES35V shows u99 error, have pressed the on button waited for "HELLO" then pressed on button again as suggested in the Troubleshooting part of the operating manual but it will not startup it...


Hello, I found a receipt for my VHS and it is still under warranty until the end of december 08.
It is now in the electronic workshop being repaired.
Thanks for your follow up
Gary













Nov 05, 2008 | Panasonic DVD & Blu-Ray Players

1 Answer

Samsung dvd-r135


The Disc Tray Will Not Open And/Or There Is A Disc Stuck In The Player. spacer.gif Some DVD Players manufactured prior to 2003 have a Dealer Lock or Child Lock function. This will prevent the panel buttons from operating.

This function is activated by pressing the STOP button on the front panel
and the POWER button on the remote control simultaneously for four seconds in the power on state. Repeating this sequence releases the dealer lock. When the dealer lock in activated, DEALER LOCK ON or DEALER LOCK OFF scrolls on the display.

If this does not resolve your problem there may be an error with in the player. To resolve this try the following these steps:
  1. Unplug the DVD player from the electrical outlet and leave it unplugged for thirty seconds.
  2. Plug the DVD player back in to the electrical outlet, but do not turn the DVD player on.
  3. With the DVD player off, press the [Open/Close] button on the front of the DVD player. The home theater should power on when you press the [Open/Close] button and eject the tray.
The second option worked for me...

Apr 12, 2008 | Samsung DVD-R135

1 Answer

SONY DVD RDR-GX315


Turn off recorder. Hold the on/off button on the dvd player for a few seconds. until "CHILD LOCK" disappears. The child lock is now disengaged...Check page 37 in the manual (I found it online -- same thing happened to my player -- I just freed it)
www.manualshark.org/manualshark/files/4/pdf_6908.pdf

Jan 04, 2008 | Sony RDR-GX315 DVD Recorder

2 Answers

Unit won't work


Using the remote, press "display/input" button for 10 sec, to unlock the unit.

Sep 19, 2007 | Samsung DVD-VR330 VCR and DVD Recorder

1 Answer

Display says "LOCKED", won't eject disk, all other functions work. Need unlock procedure.


How I got my DVD from ”lock” condition

My DVD (Panasonic m: DMR-ES10) had gone to ”locked” condition without any warning.

Perhaps the reason was that I transfered the machine when it was on and recording was going…

Guidebook didn´t help to resolve the problem, neither Internet. Finally I managed to solve the promlem . This is how i did step by step:

1) Power on
2) Hello
3) read
4) no disc
5) functions
6) to others
7) setup
8) select down arrow
9) disc
10) select right arrow
11) setings for playback
12) enter
13) ratings (level8)
14) enter
15) No limit
16) enter
17) ”The Recorder is now unlocked” (picture of open lock)
18) enter
19) return
20) return

After this DVD works normally.

Jalmari

Aug 11, 2007 | Sony DVP-S330 DVD Player

Not finding what you are looking for?
JVC XV-N212 DVD Player Logo

Related Topics:

472 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC DVD & Blu-Ray Players Experts

The Knight
The Knight

Level 3 Expert

68223 Answers

kakima

Level 3 Expert

96417 Answers

Rod
Rod

Level 2 Expert

224 Answers

Are you a JVC DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...