Question about Office Equipment & Supplies

1 Answer

The black ink cartridge on my kodak easy share 5300 appears to be faulty. I have changed the cartridge and deep cleaned the print head as wel, any suggestions?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 96 Answers

Depending on the issue, the solution may be just to replace the ink cartridge. If that does not work, try these steps:

Remove the black and color ink cartridges.
Right above where the black ink cartridge was, in the top left hand corner of the printhead, push up towards the ceiling and you should be able to push a button that releases the printhead.
Place the printhead right back into the printer and push straight back on the back wall.
You should hear a loud snap.
Replace the ink cartridges which should snap as well.
Close the printer.
After about a minute or so the printer will ask you to do a calibration.
Insert a paper and press start.
Scan the calibration sheet.
After that, in the menu, do a printhead clean.
Do one basic and one deep.
Print a demo sheet to see if anything has changed.
If the picture looks better, continue to do cleans.
In the event that it does not, the printhead will need to be replaced and since the printer is still under warranty, Kodak specialists will try to overnight you a printhead.
The whole process is short and free.
The number for Kodak AiO Support is 1 800 421 6699.

Posted on Jul 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

My KodakEasy Share 5300 will not print in black.


92b8b47.jpgThe Kodak AiO printers 5000 series and ESP series PRINTHEADs has orange protective cap that need to be remove to fit on the printer carriage. For the ink cartridges 7b91cbc.jpgthere is also a orange protective cap.
Issue that its not printing black and deep clean and removing the printhead and reinstalling the printhead (reseating printhead) is already done and still no black when printing. The printhead should be replace. For futher assistance call 1 800 421 6699 Kodak AiO printer support line

Nov 16, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Kodak 5300 All In One Printer. Black ink quit printing.


Hi there.
It could be the chip in the cartridge... faulty for printing?
Settings in the printing process?
Iceman.

Nov 10, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

My printer will not print in black and white. i have already cleaned the print head and that changed nothing. my printer is a kodak easy share 5300


have you done the deep cleaning?If yes Please try also to Calibrate the printer.

Now if this solution did not solved your problem it means the nozzles of the printhead that you are using is already clogged Please call kodak for Printhead replacement Toll Free 1 800 421 6699

Nov 03, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

My kodak 5500 AIO easy share printer will not print black ink.


Hi,

follow the step by step solution from kodak.

Choose All-in-one printer and then Print quality and follow the further steps. I think it's a problem with your printhead.

Oct 11, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

2 Answers

Kodak 5300 prints with horizontal stripes, changed black cartridge as instructed and no improvement.Did the deep head clean, did calibration , what else can I do?


For that problem kindly try doing the ff:

* Re-seat the inks both color and black then try printing
* Re-seat the Printhead of the printer then print again
* if problem still persist call 1800 421 6699 and the technical rep will replace the printhead

Hope this will help

Thanks
Byron

Sep 24, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Kodak Easy Share 5100 will not print after I changed black cartridge


Press copy and photo at the same time and print a demo sheet. Look at the eyes of the two kids in the picture, if they look like zombies, your printhead is clogged. try cleaning the printhead and print the demo again. If it's the same, you need a new printhead. Call Kodak.

Oct 08, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Black inkwon't print


pictures are not clear even after installing new ink cartridge and cleaning print head

Oct 04, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

98829 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

63990 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...