Question about Whirlpool Cabrio WTW6600SBT Top Load Washer

1 Answer

Wtw6600sw flashes code f and the 54

Posted by on

  • Anonymous May 02, 2009

    washer shows f and willnot engage motor

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Motor controller

Posted on Jul 22, 2008

3 Suggested Answers

jgwhomeequip
  • 1902 Answers

SOURCE: CODES F-54

Unplug the unit for 15 minutes then plug it back in. IF that does not work then it is a problem in the main board and the main board will need to be replaced. This is a very uncommon error code. You can go to repairclinic.com and order the part that will fit your machine

Posted on May 21, 2009

  • 58 Answers

SOURCE: F-54

F-54.. Motor Control Overcurrent. The machine motor controller is detecting high voltage at the motor.
This is usually caused by something lodged between the inner and outer tub. The first thing to do is see if the tub moves freely & smoothly by hand. if not, Then you need to open the top of the machine and remove the splatter guard and turn the drum till you see the obstruction then fish it out. If on the other hand it is free and smooth then there are tests that need to performed to determine the source of the code... Hope this helps... Bill

Posted on May 21, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Model WTW6600SBO: Machine is stuck, won't spin


I'm having the exact same problem...did you ever find a solution?

Jun 16, 2010 | Whirlpool WTW6600SW Top Load

1 Answer

F-54


F-54.. Motor Control Overcurrent. The machine motor controller is detecting high voltage at the motor.
This is usually caused by something lodged between the inner and outer tub. The first thing to do is see if the tub moves freely & smoothly by hand. if not, Then you need to open the top of the machine and remove the splatter guard and turn the drum till you see the obstruction then fish it out. If on the other hand it is free and smooth then there are tests that need to performed to determine the source of the code... Hope this helps... Bill

May 21, 2009 | Whirlpool WTW6600SW Top Load

1 Answer

CODES F-54


Unplug the unit for 15 minutes then plug it back in. IF that does not work then it is a problem in the main board and the main board will need to be replaced. This is a very uncommon error code. You can go to repairclinic.com and order the part that will fit your machine

May 21, 2009 | Whirlpool WTW6600SW Top Load

1 Answer

Trouble code F1


code usually means main control failure

Nov 27, 2008 | Whirlpool WTW6600SW Top Load

1 Answer

CODE F 50


most likely connection to motor sensor on bottom.. just behind the motor rotor the connection is probably not making good contact with sensor connection

Jul 29, 2008 | Whirlpool WTW6600SW Top Load

2 Answers

"F" error code in WTW6600SG1 Cabrio Washer


I don't have a solition and am looking for one my duet whirlpool keeps coming up code F

Jul 07, 2008 | Whirlpool WTW6600SW Top Load

1 Answer

Flashing F 50


Mark eanes, were you able to get your washer going again?

Foster

Jan 27, 2008 | Whirlpool WTW6600SW Top Load

1 Answer

Whirlpool WTW6600SB


its under warrenty call for service if you attempt to fix it it will void the warrenty

Dec 05, 2007 | Whirlpool WTW6600SW Top Load

1 Answer

Whirlpool Cabrio Mdl WTW6600SW


some times well a lot of times if you call cust assistance and your that close to your warranty they will comp the call but if you didn't send in your warranty card and haven't had a service call then they don't know when you bought it be sure to get cust assistance and not cust service f 50 is the code for a stalled motor see if your basket spins freely

Sep 16, 2007 | Whirlpool WTW6600SW Top Load

Not finding what you are looking for?
Whirlpool Cabrio WTW6600SBT Top Load Washer Logo

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...