Cicruit board for IC4511

please add authorization code please help me adobe illustrator serial number 1034-1473-8255-5483-9226-2784 activation code 1854-6889-6007-3622-2980-3942-4511 and please authorization code send my email id soheb57@gmail.com please please... help me quickly

yes..get another board..and be careful about that soldering iron and it's rating..

is that the model number? who's the maker? We can find you a replacement board online.

These sets heat up when the IC (Integrated circuit) starts malfunctioning!
its a hardware problem the IC must be changed as quick as possible. Get it fixed, before it sparks the motherboard or any other component of your device!

Kindly give response!!

Hi, I post here my last comment, follow the diagram at page 44, leave the checkup at page 16, for some of the test you need raster, and the TV is in protection mode now.
From protection mode follow troubleshooting diagrams, I think is page 44/45.
There are many faulty component that can give you blank screen with no raster, the strange things is that the TV stays on, has sound and is not on protect.

Test also the sygnal boards (the ones with the AV connectors) and see if it makes any difference switching the signal to a different input, this TV has several ICs that manage the video signal, testing blindly will give no help. Follow the diagrams on manual.


I think the following was my last comment:
-----------------------------------------------------------------

You need to follow the troubleshooting charts at page 44 of user manual.
(download the service manual here)

Regarding the jungle chip, that is just a familiar name for the main computer CPU, service manuals rarely call it Jungle chip. Your jungle Chip is the main processor, IC4511, be careful handling the component arount the IC4511, some IC in there is sensible to static charges in your hands, better to keep fingers away.

In your case I would start testing following the diagram at page 44 of SM. I will also test the pico fuses at the base of convergence ICs, if the STKs had been replaced
That is what you do when the nature of the problem is not clear.

Since there is no protection mode on, the fault
can concern IC3001 and IC3002 that are vidio processors, and other parts involved.
If at any point you get the led on, and TV going in protect mode, with a flashing led, that is a step forward, means that the jungle IC (The IC4511) had detected the fault.

Start testing following the procedure at page 44, or same page on your version of service manual.


(download the service manual here)

NUMBER OF FLASHES
POSSIBLE CIRCUIT
1
+140
2
LOW D.C.
3
CONVERGENCE
4
HHS
5
IC4511
6
IC4518

IC4511 is on DG board. Asterisk indicates whole board is to be replaced. In schematic, labeling on IC4511 indicates it does some form of video processing. Manual instructs to add an "S" at end of board part number when ordering.
* DG-BOARD
TNP2AA126
PIP PROCESSING, SPLIT, SEARCH, FORMATS

Thats the code for IC4511 on the DG board, you will need to replace the entire DG board. You can get one at the following link, just leave them a email with your model number and what your error code blink is, they respond quickly.
http://servicemanuals.vstore.ca/

There is no way to tell if it needs just resoldering only a couple minutes if the vertical IC is defective most shops will say you need a new Circuit board. thats sad to say but most shops dont do component level repairs anymore, they just switch Circuit boards as they can charge more that way, and not have to reply on having the experience to actually diagnose the problem.Thats very unfortunate but true.

Hello WoodenBadger,
I do have the board in stock. Please contact me by email: boards@interactiverepair.com for full details on receiving the board.

Best regards
circuitcity

Yes. let me know to contact you

Red Convergence IC bad.....small circuit board by itself up
above main boards..........replace both IC's for reliability...
STK392-040.........DO NOT USE GENERIC IC'S ! I use only
PANASONIC brand = no re-calls !!
Re-align when repair complete............T.