Question about Marantz Audio & Video Receivers

Open Question

Marantz cr2020 Slimline series (10 years old)now shows cd error on display and no output or remote control use. Also touch lid control on panel does not work

Posted by on

3 Suggested Answers

  • 4234 Answers

SOURCE: Marantz SR7500 Home receiver, Digital CD will not play

Verify that the digital output is enabled. This is a switchable output. A brown-out or other power isseu may have shut it down.
Get back to us if that is not the case.
Dan

Posted on Mar 20, 2008

  • 336 Answers

SOURCE: Marantz SR5200 receiver works only with remote not manually

Check for a stuck/jammed switch, press each switch if one doesn't make a normal click sound or it doesn't move at all that's your problem.
If that's not it check the owners manual for how to reset the receiver (not all manuals will tell you how to reset it) Another way to reset it is to short the memory cap, but that is better left to a tech.

Posted on Feb 13, 2009

  • 1 Answer

SOURCE: Marantz SR-18ex remote control number

If you mean the model number, that is: RC-18SR

Posted on May 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have marantz 7'300 an the standby light is on but wont power on no screen no sound idk help please


Unplug it from ac for 10 minutes and then try it. If that does nothing you need to get it to warranty service. It has a 3 year warranty so should still be covered. No Video or audio output on MARANTZ nr1602

Jun 14, 2016 | Marantz Audio & Video Receivers

1 Answer

I have a Marantz SR 8001. The front display lights went completely out, but the blue lights over the selector knob, volume knob, and the HDMI blue light comes on. I was setting up a Logitech 1100 remote...



Hello,
You have a nice piece of Stereo...I believe you have mistakenly selected the" display mode OFF" function..,Here is the info that you can reactivate it..
If you need a soft User Manual here is the link for it too..

Take care and please
Remember to rate/vote and give me 4 Thumbs Up
for Helping out the Community :)...please insert some words in "
My Testimonials "
Hope this helps!

------------------
" display mode OFF"

You can select the display mode for the front display
of the SR7001.To select this mode, press the DISPLAY on the remote control or the front panel.When this button is pressed, the display mode is switched in the following sequence.Input Mode ? Surround Mode ? Auto display OFF ? Display OFF ? Normal Mode ? Input Mode Normal Mode: Displays the selected input function. If the function has been renamed using the Function Rename feature (see page 26), the renamed name appears on the display. Input Mode: Displays the input mode set via the Function Input Setup feature (see page 25). Surround Mode: Displays the status of the selected surround mode. Auto Display Off mode: The display is off. But, if you make a change to the unit such as the input or surround mode, the display will show that change, then go back to off after about 3 seconds. When changing the volume, it is not displayed. Display Off mode: The display is off completely. Note: • Only the DISP indicator will be illuminated on thefront display in display off condition
http://www.scribd.com/doc/53431794/Marantz-SR-8001-Owners-Manual

Jun 23, 2011 | Marantz SR8001

1 Answer

I am looking for a manual fo a marantz cd63 cd player and a replacement remote for the said item I can be emailed at aitkenmartin23@yahoo.co.uk thanks


Model RC63CD is available for $58

http://remotes.com/remotes/servlet/rs?a=gmi&smodel=CD63SE&brand_pn=MARANTZ_CD63SE&mode=large&uuid=A12997911098241

or you could lurk around eBay and search for "CD63 remote" or "RC63CD remote" and maybe one will become available cheaper.

Can't help on the manual but from the pix I've seen its a vanilla CD player with all possible outputs - analog, coaxial digital and optical digital. Nothing unique or complex about it that would need explanation.

Try any CD manual and it would probably make you fluent in Marantz CD83-ese.

Mar 10, 2011 | Audio & Video Receivers

2 Answers

My Marantz sr 4001 receiver has no output. Is


There is no fuses for the speakers. Check setup. If the receiver has 7.1 channel input try to connect a source there so you can check output (amp) section and the speakers.

Jul 18, 2010 | Marantz SR4001

1 Answer

The receiver is turning itself off - i.e back to standby.


If you don't use the remote control is it okay? If so, tear apart your remote control, use a Q-tip to clean all the lines in the circuit board where the rubber contacts touch. Then make sure that the rubber buttons don't have any 'gunk' on them that are making them stick. Clean the rubber pad with a qtip with dishsoap. Dry well, put back together and see if she works. Report back on your success. Good luck.

Dec 29, 2009 | Marantz SR-7200 Receiver

1 Answer

OSD control from receiver


I had the same problem on my 7200 until I realized that the display comes up on the television screen. I carefully followed the set up required from the manual. I got the Manual online at Marantz.com. I have a cable hook up so I connected the video cable out from the box to the Video in source on the 7200 and monitor out to my Television. I then pressed the Amp button to get the remote to Amp mode. I then pressed the OK button that is in the center of the four direction buttons and the menu displayed itself on the screen . I hope this helps. ercble

Nov 28, 2008 | Marantz SR-7200 Receiver

1 Answer

Marantz SR7500 Home receiver, Digital CD will not play


Verify that the digital output is enabled. This is a switchable output. A brown-out or other power isseu may have shut it down.
Get back to us if that is not the case.
Dan

Mar 20, 2008 | Marantz SR-7200 Receiver

5 Answers

Marantz SR18-no sound


I have worked exclusivly on marantz recievers, for the last seven years, the loud 'pop' you heard, and smoke, was 90% that one of the amplifier channels, on the amp block, has blown, and consiquently the unit stays in protect mode. It will power up, and decode audio, and even show an f.m. stereo on the tuner, but you won't get the 'happy click' of the protection relays, until the channel is repaired. also replace the 5fd memory capacitor on the front micro board behind the front panel. If you have someone repair the channel, make sure that the tech resolders all of the connections on the molex connectors on the amp block. there are 10 of them, five male and five female, The bad solder on these are what caused the problem in the first place.

Nov 29, 2007 | Marantz SR-18EX Receiver

1 Answer

What does this Error Message mean?


hello AuburnCE, After 4 years of joy my Marantz SR8200 receiver also shows this message from time to time - after 1h of operation or so. Then it is hanging (like a PC ;o). Taking it of from the electricity network for a moment resolves the problem until the next POW 05 hang usually a fiew days later. I brought the receiver to an authorized Marantz maintenance and repair center twice now and they were not able to reproduce the error. They said this has directly or indirectly to do with the power supply unit. They also called marantz. For me it appears that this is not an internal receiver problem IN MY CASE. I think I there might be a relationship to zapping on my Topfield SAT receiver via power supply network as the connection is optical. Or my dimmerunit for the light. Unfortunately I do not have a separate electric circuit for Audio/Video and all other electrical devices. and dimmer units are well known to cause problems in the power supply chain - e.g. like noise in your audio package. Please note: the experts told me: Check POW 05 can have other (receiver internal) causes also. Above is just my suspicion 8as a non-expert) for my case . Regards, Fred

May 29, 2007 | Marantz ZR6001SP

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

184 people viewed this question

Ask a Question

Usually answered in minutes!

Top Marantz Audio & Video Receivers Experts

gaucherre

Level 2 Expert

180 Answers

Pieter Vleeshouwers

Level 3 Expert

1410 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Are you a Marantz Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...