I cant set up my Nintendo 64 Console - Nintendo 64 Console

Well try cleaning the game packs out with qutips and rubbing alcohal then. We agree with taz on this then try a new expansion pack then. It might need a new expansion pack then.

Well this video is on how to set up and N64 console

36.00 to 97.00 at lukie games then. The gold one is the best but it costs about 97.00 then.

36.00 at JJ games then.

Just follow these steps and you will be playing your Nintendo 64 in no time at all.

1. Set your Nintendo 64 in it's desired location
2. Plug the power cord into the back of your console
3. Plug the other end of the power cord into an electrical outlet
4. Plug the AV cable into the back of your Nintendo 64 system
5. On the back of your VCR find 3 cable sockets colored red white and yellow
6. Plug the the red plug of the AV cable into the red socket
7. Plug the the white plug of the AV cable into the white socket
8. Plug the the yellow plug of the AV cable into the yellow socket
9. Plug your Nintendo 64 controller into the front of your console
10. Place your game into the game cartage slot
11. Turn on the Nintendo 64

If you encounter any problems at all feel free to comment on this solution so that I can further assist you.

The N64 is the third home-console published by Nintendo and is the successor of the Super Nintendo Entertainment System (SNES). It was competing with the Playstation 2 and the Dreamcast.
The name Nintendo 64 comes from the fact that it was one of the first 64-Bit consoles. The "64" can also be found in various game titles like "Super Mario 64" oder "Donkey Kong 64".
The console was released in 1996 and the last game was released in 2002.
Which made this console popular was mostly the nintendo only milestones. The Zelda game (Ocarina of time) is among fans, still the best Zelda game ever released. It was also the debut of the first 3D Mario and Donkey Kong games.

Try removing the cartridge from the console and blowing into it to remove dust.

Unplug the N64 and let it sit for 10 minutes and cool down.

Reinsert the cartridge into the console and attempt to load your save again, and also check your controller connection.

Try replacing the video cable. If that does not work, see if you can purchase a replacement video cable for the N64

I’m happy to help further over the phone at https://www.6ya.com/expert/susan_42b401e0b1603d8a

Do you have than one video setting-sometimes there is video one--video 2, video 3

check the back of your game and see if it says input then it goes to output on the tv or vice versa

There is a big empty space on the back with a small plug on the inside. There should be a "power brick" that slides in there and then plugs into the wall.

does the console turn on(lights) any sound , I'am going to guess no, if you have a gamecube or snes with rca cables use those and see if it works,the rf adapters for gamecube and n64 are cross compatabile as well, however the one for snes isn't the same, you may just need another cable, also try setting the tv to ch.3/4 and if you have more than one coaxial input try changing to another , if the console is not turning on then it may be a bad power cord or the mem pak isn't seating right or the console has died, most likely the rf switch has died thought, rca will last longer anyway, either go get one from a local gamestore or if you cant find one for 64 get the gamecube cords they have the same connector on the console end. Hope that helps