Performa # pdet910ayw dryer will start but stops in 30 secs

Question edited for clarity.

The wiring is here
https://www.partselect.com/Models/PDET910AYW/Sections/WIRING-INFORMATION/?ModelID=177232&ModelNum=PDET910AYW&mfgModelNum=&ManufactureID=1&Selected=59105&Position=6&mfg=Maytag&Type=Dryer&Mark=6

https://www.google.com/search?q=maytag+performa+pdet910ayw+wiring+diagram

.. The video, may be of help

http://bit.ly/1zW9uz8

Belt tension pulley assembly

This is a RSPC dryer (SQ/Amana)

SERVICE MANUAL

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Hello,
On that model the heater in behind the back wall of the drum. To access the heater place a screwdriver between the top and front panel and pop the top up.The heater housing will be attached to the top of that back wall of the drum support

Gene

Hi,
Here is a tip that I wrote about dryers and noises...

It will help you determine what is happening there...

Dryer Repair Squeaks, Grinding, Clicking and Knocking Noise


heatman101

Asker's Testimonial "That answer was very informative - thank you fortaking the time to educate me. " - teresa241964

lift the top you will need a putty knife in the front there are two clips one on each side push in and lift up once up there is a screw on each side remove and the front comes off

I looked up your model. The blower wheel on these 31001317
causes the dryer to over heat. The fuse kit LA-1053 mounts here:



If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Hi. The fuse is mounted directly on the heater element, in between the heater duct, and duct exhaust.

Click here to view a picture of the fuse.

Hello, My name is Juan. I will need help to find the problem with some suggestions. My dryer won't start at all, even when I open the door the light bulb inside the drum did not turn on. I check the power source it is ok. Please help with alternatives for a solution. Maytag electric dryer Mod # PYET344AYW

Thanks,
Juan J.