Question about PC Desktops

1 Answer

My monitor not turn on when the computar turn on to . and when you try to turn on the monitor its like flash for 1 sec and tune off to black . to turn the monitor on i need to prees the botten 30 time on the monitor to turn him on.

Posted by on

  • philipp357 Jul 24, 2008

    its somthing with my monitar i chack that its not the computar

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

First you sec your monitor power cable is not loos or power in properly if ok then you sec your monitor VGA cable is properly conect to your pc if ok then you disconnect your VGA cable in your pc then you power on your monitor and sec that youre monetor screen. show a masege or not masage like tiis : CHEEK SIGNAL CABLE or NO SIGNAL : if show this signal then you men your display card is not responding or monitor shows nothing then you meen your monitor is faulty then contact any monitor techenican and solve your monitor problem.

Posted on Jul 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is my samsung flat screen monitor black when turn on


Most likely culprit is a defect in the the power module (inside the monitor). Most failures are because of bad electrolytic capacitors.

Do a search using Google and type into the box (the Great Capacitor Plague). Read all about it.

Sep 05, 2014 | HP dx2300 Monitor Personal computer Intel...

1 Answer

Monitor gos black turn off then back on video stays on 15 sec then off again


Hello
It could be a bad monitor or videocard ,the only way to test this is by connecting another monitor to that PC or your monitor to another PC.

Good Luck

Feb 13, 2012 | HP PC Desktops

1 Answer

Lenovo 3000 n200 0769AMU press power on switch green light on after about 1 sec screen still black no HD light fan running


Welcome to Fixya

Try to drain the electrostatic charge of the motherboard that usually cause this issue. I wrote a tip on how to do the power drain. Try to plug in external monitor on the VGA port and see if you are getting display using external monitor. If you are getting display using external monitor then the problem would be the laptop LCD. If you are getting the same black screen using external monitor then the problem is already the motherboard.

Thank you for using Fixya!

Mar 19, 2011 | Lenovo 3000 N200 0769 Intel Celeron 530...

1 Answer

Screen does not stay on it just flashes on every four sec


Sounds like the refresh rate of your video adapter is set incorrcetly, especially if the monitor is new to the system. CRT monitors could handle a wider rate range than the current LCD's.

The next time it starts working correctly, go to "display settings" and check the "monitor" tab. For a LCD monitor, the refresh rate should be between 60 and 72. Experiment with the different rate settings to optimize your display.

Hope this helps

Nov 19, 2008 | Compaq Presario SR1120NX 2.66GHZ Tower w/...

1 Answer

Hi I am fairly good with computers but i dont know how to fix this problem. My advent 7113 laptop turns on the power light comes on and they the fan starts but am not sure if the harddisk boots. Then...


It sounds like Either the onboard video card or the LCD controller has gone bad. To verify which one connect a monitor to the VGA adapter on the back of the Laptop. You may also have to hit a key combination to swap displays (Usually <Fn> + <F5> but may be different the keys usually have an offset that indicates its function.

If the Monitor displays the same black and white anomaly then the vid card went bad, if it displays a normal screen your LCD controller is faulty.

Either problem would likely need service from an experienced technician

Hope this helps
Dave

Nov 07, 2008 | PC Desktops

1 Answer

I have a Gateway FPD2275W monitor. When I turn on the computer the monitor flashes on for about 2 sec. and then seems to go into standby mode. Even the menu screens will not show up when this happens. When...


Your power supply may not be supplying the required electricity to keep your monitor on. Try plugging your monitor in a different electricity source. Your CPU may be drawing much power from the source and not enough is supplied to the monitor. You may plug the monitor directly to the UPS (uninterrupted power supply) if the cable end allows it.

Aug 31, 2008 | PC Desktops

1 Answer

Monitor goes blank less than a second after turning on.


do you have an aftermarket video card. In the bios you have to tell the computer if it is looking for a agp/onboard or PCI video card. Either that or the video driver or settings are wrong Try safe mode to check

Jun 25, 2008 | Dell Dimension 2400 PC Desktop

2 Answers

Samsung 940BX LCD monitor 9 mos. old, Problem with monitor not staying on. You turn it on, it will come on for about 3 secs w/picture then goes off, but blue light stays on, black screen. Press power...


The IPboard part no. BN44-0012A is bad. We had to replace 5 monitors with the same problem. If under warranty call 1-800-Samsung for repair or exchange.

Korhan Balimtas

May 19, 2008 | PC Desktops

1 Answer

LCD Monitor


is it connected to a PC? is the power source good 110v or 220v?

Mar 30, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

274 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...