Question about Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

Print quality My prints are coming out with a purplish tint to them. When I print from the Internet, it is very faded. My cartrideges are new and I did clean and calibrate the printer heads.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 96 Answers

Remove the black and color ink cartridges.
Right above where the black ink cartridge was, in the top left hand corner of the printhead, push up towards the ceiling and you should be able to push a button that releases the printhead.
Place the printhead right back into the printer and push straight back on the back wall.
You should hear a loud snap.
Replace the ink cartridges which should snap as well.
Close the printer.
After about a minute or so the printer will ask you to do a calibration.
Insert a paper and press start.
Scan the calibration sheet.
After that, in the menu, do a printhead clean.
Do one basic and one deep.
Print a demo sheet to see if anything has changed.
If the picture looks better, continue to do cleans.
In the event that it does not, the printhead will need to be replaced and since the printer is still under warranty, Kodak specialists will try to overnight you a printhead.
The whole process is short and free.
The number for Kodak AiO Support is 1 800 421 6699.

Posted on Jul 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Print quality: dark faded, but continuous


Open top cover and remove toner, shake toner cartridge and try a test print. IF image good then problem is low toner level in cartridge.

Apr 01, 2010 | HP LaserJet 4 plus Printer

1 Answer

CANON PRINTER PRINTING FADED


Check the settings of your printer's print quality it might be set to EconoMode.

Nov 18, 2009 | Canon PIXMA MP190 All-In-One InkJet...

2 Answers

Poor print quality .... Canon Pixma MP140 ...


Paper quality does make a difference in the quality of print, but it's usually in the areas of blurriness and vibrance. If your prints are coming out faded, the quality for your prints might be set to 'economy', which doesn't use very much ink. If you have it set for 'quality' prints, I would try replacing the ink cartridges.

May 08, 2009 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

Bad photo quality after changing drum


your laser printer
1) print color quality is now distorted that means print skew (technician called)
2) print tint means the print color not enough density,
3) print mottle means print dirty
you may try
1) print distorted--- find out the skew adjustment from your printer manu, it is adjust the image before transfer to the drum.
2) print skew could be happened when the drum replace install not very accurate, so install it more carefully.
3) print tint---you may increase print density from the manu, not fix,
4) print tint---the toner caridge near life cycle or using the less compatible toner. so you have change the quality toner or cartridge (if near life cycle) to improve quality photo print
5)print mottle---toner quality ? or cartridge near life cycle also cause print dirty paper,

Feb 08, 2009 | Konica Minolta magicolor 2300DL Laser...

1 Answer

Poor print quality - top half page okay, bottom print faded and skips top half page okay, bottom print faded and skips problem Just installed a new cartridge


check the wright cartridge model you installed and well pluged to the printer

if it is ok

try to change printer properties and fix it correct options with there tabs ( ex: paper, print quality etc)

all are well try to reinstall the printer driver

Jul 16, 2008 | HP PSC 1210 All-In-One InkJet Printer

1 Answer

Green Tint Over Entire Printed Picture


I had a very similar problem and found out that the problem was the quality of paper I was using. Remember, a photo printer is expecting high quality results. Cheap, low quality paper will not accept the ink as well as higher quality paper. I can't guarantee this will solve your problem but I have not had any green tints since switching to a higher quality photo paper.

Jun 27, 2008 | HP Photosmart 8150 InkJet Printer

2 Answers

PHOTO APPEARANCE


Check your printer settings, If your printer is set on draft mode the prints may appear faded washed out, turn up the quality of the printing and this should solve the problem.

Feb 25, 2008 | Canon PIXMA MP160 All-In-One InkJet...

Not finding what you are looking for?
Kodak EASYSHARE 5100 All-In-One Printer Logo

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Sajid Najmi
Sajid Najmi

Level 1 Expert

31 Answers

Cindy Wells

Level 3 Expert

4952 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...