Question about GE Microwave Ovens

1 Answer

I recently purchase a GE Profile Convection/Microwave Oven. The two shelves that came with the microwave have a white plactic sleeve on the four corners of each shelf/rack. Are they to remain on the shelves or removed. The user guide did not address this - although they are shown in place on the shelf/rack drawings. Pete

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GE Master
  • 9,086 Answers

I'm sure a label or info sheet would be present warning you to remove them if you were supposed to.

And I suspect the plastic would be thin and clear (like cellophane) if it were supposed to be removed.

The fact that it's white means it's probably vinyl and it is to cushion the corners and also to make it easier to clean the corners so grease and food don't build up so easily, which can cause arcing.

If you'd like me to check further, please reply back with your brand and model number so we can help you.

We're happy to help and we appreciate your thoughtful rating of our answer.

Posted on Jul 18, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cooking with convection oven


You do not have to remove the turn table, but I use the metal rack when cooking with convention.

Apr 15, 2014 | GE Profile PEB1590 1.5 Cu. Ft., 1000W,...

1 Answer

GE Profile convection JVM1790 will not heat. Everything else works but not heating. The oven is only two years olds. Any suggestions?


Hi,
Here is a tip that will help you to figure out what is wrong with yourMicrowave Oven....

Microwave Oven Basic Troubleshooting Tips

heatman101

Jun 16, 2011 | GE JVM1790 Convection / Microwave Oven

1 Answer

I have a GE profile microwave convection oven Model Jeb1095WB It stopped heating up any suggetions


Hi,
Here is a tip that will help you to figure out what is wrong with yourMicrowave Oven....

Microwave Oven Basic Troubleshooting Tips

heatman101

///..

Oct 25, 2010 | General Electric Microwave Oven

1 Answer

GE Profile Performance Convection/Microwave Problem Heating


Either magnetron, capacitor, diode pack or transformer has failed causing a fuse to blow.

Jul 13, 2017 | General Electric Microwave Oven

1 Answer

Need manual for GE Profile


LOOK HERE;

http://www.serenitysys.com/******/archives/GE%20RV%20Microwave%20manual.pdf

Oct 16, 2009 | GE JE1640 Microwave Oven

1 Answer

My GE Profile Convection Microwave Oven - Convection not working


Hi,
Here is a tip that will help you to figure out what is wrong with yourMicrowave Oven....

Microwave Oven Basic Troubleshooting Tips

heatman101
uijjf

Dec 02, 2008 | GE JVM1790SK Convection/Microwave Oven

Not finding what you are looking for?

Open Questions:

0 Answers

GE Microwave JVM1441BH04: Safe to reconnect replacement stirrer & turntable motors after accidentally burning out the turntable motor? GE JVM1441BH04 Over Stove Microwave: Tapping noise was coming from the 21v AC stirrer motor which sits atop the cooking chamber. I disconnected the two connecting leads, unfastened the single screw holding it on, placed in on my scanner glass to get a high rez photo of all the specifics listed on the motor label. Bad news: While waiting for the scan to finish, I warmed my coffee in the microwave on the highest heat for 30 seconds. I subsequently discovered the 21v AC turntable motor, which had been working just fine, was now no longer working, with infinite resistance across its terminals, and a burnt electrical smell. Both the stirrer and turntable motors are powered by a 24v tap off the magnetron fan. My theory: By running the microwave with the stirrer motor out of the circuit, I delivered excessive voltage to the turntable motor, which quickly fried. The 24v tap off the magnetron fan motor currently shows the correct 24v output. However, with both the stirrer motor and turntable motor disconnected, running the microwave for a few seconds shows approx 95v across the wire leads for both of the 21v motors. I have obtained replacement motors for both the noisy stirrer motor and the fried turntable motor. My question: Can I simply reconnect both motors in their proper locations, vow never again to run one without the other connected, and all will be well? Or will the newly installed motors simply be fried in a matter of seconds?

Jan 04, 2018 | GE Microwave Ovens

Microwave Ovens Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9086 Answers

Devabhakthuni...
Devabhakthuni...

Level 2 Expert

225 Answers

D. E. Hev

Level 3 Expert

1179 Answers

Are you a GE Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...