You have to go into the sp modes to clear this code .pres the yellow c then 107 and hold down the orange c , do this all in sequence , it wil go in the sp modes and show copy sp .enter there and switch the power off wait 5 seconds switch back on
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The Error Code SC542 or Sc546 could be a caused by a few reasons. There is a temperature problem with the fuser unit, the roller thermistor is bad, or the BCU Board is bad. 1 metode to reset Ricoh Error code sc542: To clear the code:
Hit the yellow "Clear Modes" key
Press 107 on the number pad
Press and hold the "Clear Stop" for 10 seconds until you get a new screen ...
Press the "Copy SP" Button on the display
Open the front door
Turn front left power switch off and on
Shut the door
The error code is now cleared. reset Ricoh Error code sc542:
To Enter and Exit the SP Mode
1. Press yellow "Clear Modes" key .
2. On the operation panel keypad, press 107 number
3. Hold down red "Clear" key more than 10 seconds.
The Copy SP is displayed.
4. Press "Copy SP" and go to the code SP5810, press "Execute"
5. To exit the SP mode, just press Exit in the upper right corner of the SP mode
screen. Power switch off and on and the error code is now cleared.
Hi Thanks for using FixYa. This error mostly occurs due to power outage. This
error means that the fuser temperature and hot roller temperatures have warm
up. After occurring of this error the printer will not work until your clear
this error code. To clear this error code
follows this step by step procedure---
To Enter in Service Mode hold down the Online +
Escape keys simultaneously and then turn on the printer.
Use up and down arrow keys to select SP2
Use up and down arrow to locate SP5
Use up and down arrow keys to select 810
Confirm the selection
Power off and on.
This will resolve
the issue by clearing the error code. Please do rate the solution and revert for further assistance. Thanks Rylee
This means the fuser has an error. You can not reset the code even if the fault has passed without entering the service mode. If you need a service manual for this let me know and I will send you a link.