Question about VCRs

1 Answer

Bought MATSUI VX1107A VCR and promised it was working bought remote but PIN protected Can anyone help or maybe tell me where I can get an instruction manual for this model Cheers!!!!!!!!!!!!!!

Need PIN code for protected MATSUI VX1107A VCR Was assured it was working but need PIN Even bought remote Please Help!!!!!
Cheers!!!!!
Denise (one frustrated mum!!!)

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I bought the Matsui VX1107A many years ago and recently pulled it out of storage for use in the childs bedroom.
I unluckily put the pin in it three times which were incorrect, only to see Protected across the screen.
I then trawled internet sites as I certainly wasn't going to part with my hard earned money to MasterCare for them to come and reset it.
Then I came across a site that told me to pull the plug out the wall for an hour then plug it back in, then switch the vcr on then press the up arrow and the record buttons together at the same time for 5 or so seconds, then hurray it was unlocked but not set back to factory settings so I got another 3 try's of entering my pin again which i got correct, so if you know the pin then you can try this.
Failing that I have the manual which came with the vcr if you tell me the section your looking for I'll scan and send the part to yourself but you would have to send an email address to send the document.
Hope this helps
Robert

Posted on Feb 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, I bought one of these from eBay and although the unit is in beautiful condition and plays perfectly, the display does not light up, nor does the NTSC button or STOP button work. I bought a remote...


HI, sorry to hear that. you have to buy another controller from AIWA. and bring the unit as well to let them know the exact model of your unit. to avoid damaging the unit

Feb 13, 2011 | Aiwa HV-MX100 VHS VCR

1 Answer

Hi I have been through all the codes in the manule and still cant set up my VCR matsui VX 1107A using a one for all universal remote. hope someone can help, thanks Dave


plug out the wall for an hour then plug it back in, then switch the vcr on then press the up arrow and the record buttons together at the same time for 5 or so seconds, then hurray it was unlocked but not set back to factory settings so I got another 3 try's of entering my pin again which i got correct, so if you know the pin then you can try this.
Failing that I have the manual which came with the vcr if you tell me the section your looking for I'll scan and send the part to yourself but you would have to send an email address to send the document.
Hope this helps

May 29, 2010 | VCRs

1 Answer

Can not get universal remote to work


Looks to me like you didn't need a new remote as the old one was working fine, it's just that the VCR remote censor has a fault on it. Or to put it simply it's the vcr that doesn't work, not your remotes.

Dec 26, 2009 | VCRs

1 Answer

I need to find how to program a toshiba vhs to a


Can't pin down the code for your model, so you will have to try these! Bear in mind that some codes could work some parts of the VCR but not all, so test all:
1004, 1023, 1038, 1175, 1176, 1188, 1190, 1191, 1200, and 1239.

Nov 06, 2009 | VCRs

1 Answer

Vcr trouble shooting


My VCR shuts off when I try to rewind a tape, can anyone help?

Aug 14, 2008 | VCRs

1 Answer

Setting Speed


You need the remote to change the setting.

Aug 03, 2008 | RCA VR643HF VHS VCR

1 Answer

How to Program Local made Universl remote for aiwa VCR


Kaamesh,
I am in Pondicherry, India.
Can you tell me the model No of your VCR. If the problem is only No colour, then it is likely that you have set the Output to a different
Broadcast Standard. India has PAL B/G, and it could be that you have accidently set the Selection to MESECAM or SECAM?
Do let me know if this works out? As for programming a Universal remote, You must read the instruction 'booklet' which comes along with it. There you have to see the List of VCRs, select AIWA, and feed the various codes one by one, and try and see if the code works on the VCR. No shortcut!

Feb 15, 2008 | VCRs

1 Answer

Proscan PSVR57 remote


book instruction, 96-psvr57-001 can check RCA

Jul 12, 2007 | Proscan PSVR57 VCR

2 Answers

Remote Setup Instructions for Non-Toshiba TV


Try contacting one of these places and tell them what you need. http://tacpservice.toshiba.com/ConsumerProductSupport/consumer_parts.htm

Sep 18, 2006 | Toshiba M635 VHS VCR

1 Answer

I cant get the vcr to record in slp


you probly need the oridg remote,What is the modle# mabe I have it send me the modle# Via Email@ birdendiving@aol.com and if I have it you pay for the shipping and you got it I have a load fo remotes from vcr's I scraped Walt Grzybowski0

Sep 12, 2006 | Emerson EWV403 VHS VCR

Not finding what you are looking for?
VCRs Logo

Related Topics:

334 people viewed this question

Ask a Question

Usually answered in minutes!

Top VCRs Experts

 Grubhead
Grubhead

Level 3 Expert

4576 Answers

alexander woolfolk
alexander woolfolk

Level 2 Expert

276 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a VCR Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...