Question about Kodak EasyShare V1003 Digital Camera

1 Answer

Installing battery I cannot close battery compartment when batt is installed

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 32 Answers

Be sure you have the battery pushed in all the way.

Posted on Jul 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change the battery


  • Open battery compartment
  • Note battery polarity, then remove
  • Install new battery with correct polarity
  • Close battery compartment

Aug 12, 2016 | Digital Cameras

1 Answer

My camera will not power up when switched on. The batteries are fully charged and I cleaned the terminals. The battery compartment is also closed. What else could I check myself?


Switch off, remove batt, then replace the bat. You should notice a red LED blink. If that does not blink, you can't do much yourself. Take it in for a proper check by authorized service tech.

Apr 13, 2015 | Canon EOS 5D Mark II Digital Camera

1 Answer

It will open the lens and extend but then closes


You might not need the warranty KODAK can see the manufacturing date of the camera from the serial number. However it might not be the same as the purchace date since the shop could have had the product in stock for a while.

Here are the steps:
1. Make sure you will install a new or fully charged battery/batteries into your camera.
2. Clean the battery contacts.
a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth.
b. Reinstall the battery/batteries into your camera
3. Without the memory card,turn on your camera.
4. Pls test with an alt. batt.
If you do not have access to a dif. battery.
Pls. take the batt out of the camera. Insert the charger into the unit from the main socket and turn the camera on. If the camera works you will need to replace the batt. If not you will need to order a No power repair.

Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

Nov 24, 2009 | Kodak EASYSHARE M1063 Digital Camera

1 Answer

My camera lense won't close even when i turn it off & on. i have tried to turn it off and on the screen only goes on & immediately turns off. the green light in the corner flashes so i know that...


Make sure that you are installing a fresh/ full charge battery
Here are the steps:
1. Make sure you will install a new or fully charged battery/batteries into your camera.
2. Clean the battery contacts.
a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth.
b. Reinstall the battery/batteries into your camera
3. Without the memory card,turn on your camera.
4. Pls test with an alt. batt.
If you do not have access to a dif. battery.
Pls. take the batt out of the camera. Insert the charger into the unit from the main socket and turn the camera on. If the camera works you will need to replace the batt. If not you will need to order a No power repair.

Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

Nov 23, 2009 | Kodak EasyShare V1003 Digital Camera

1 Answer

M863 on turning on immediately closes down. Battery replaced and fully recharged-still problems persists.


Make sure that you are installing a fresh/ full charge battery
Here are the steps:

1. Make sure you will install a new or fully charged battery/batteries into your camera.
2. Clean the battery contacts.
a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth.
b. Reinstall the battery/batteries into your camera
3. Without the memory card,turn on your camera.
4. Pls test with an alt. batt.
If you do not have access to a dif. battery.
Pls. take the batt out of the camera. Insert the charger into the unit from the main socket and turn the camera on. If the camera works you will need to replace the batt. If not you will need to order a No power repair.

Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

Nov 21, 2009 | Kodak EasyShare C613 Digital Camera

1 Answer

My m883 turns on for 1 second then shuts off??


Make sure that you are installing a fresh/ full charge battery
Here are the steps:

1. Make sure you will install a new or fully charged battery/batteries into your camera.
2. Clean the battery contacts.
a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth.
b. Reinstall the battery/batteries into your camera
3. Without the memory card,turn on your camera.
4. Pls test with an alt. batt.
If you do not have access to a dif. battery.
Pls. take the batt out of the camera. Insert the charger into the unit from the main socket and turn the camera on. If the camera works you will need to replace the batt. If not you will need to order a No power repair.

Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

Nov 18, 2009 | Kodak EasyShare M883 Digital Camera

1 Answer

My Kodak Easy Share M340 is having a problem. When I turn in on the lens opens and hen closes right away.


Make sure that you are installing a fresh/ full charge battery
Here are the steps:
1. Make sure you will install a new or fully charged battery/batteries into your camera.
2. Clean the battery contacts.
a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth.
b. Reinstall the battery/batteries into your camera
3. Without the memory card,turn on your camera.
4. Pls test with an alt. batt.
If you do not have access to a dif. battery.
Pls. take the batt out of the camera. Insert the charger into the unit from the main socket and turn the camera on. If the camera works you will need to replace the batt. If not you will need to order a No power repair.

Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

Nov 16, 2009 | Kodak EASYSHARE M340 Digital Camera

1 Answer

Camera turns off then quickly shuts off.


Make sure that you are installing a fresh/ full charge battery
Here are the steps:
1. Make sure you will install a new or fully charged battery/batteries into your camera.
2. Clean the battery contacts.
a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth.
b. Reinstall the battery/batteries into your camera
3. Without the memory card,turn on your camera.
4. Pls test with an alt. batt.
If you do not have access to a dif. battery.
Pls. take the batt out of the camera. Insert the charger into the unit from the main socket and turn the camera on. If the camera works you will need to replace the batt. If not you will need to order a No power repair.

Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

Nov 13, 2009 | Kodak EasyShare M863 Digital Camera

1 Answer

When turning on camera the lens will open then shut off on a fully charged battery. It will allow you to view pictures on the camera by selecting the favorites and turning it on but when you turn the...


Make sure that you are installing a fresh/ full charge battery
Remove the battery
Clean the metal contacts on the battery using a clean cloth

Pls test with an alt. batt.
If you do not have access to a dif. battery.
Pls. take the batt out of the camera. Insert the charger into the unit from the main socket and turn the camera on. If the camera works you will need to replace the batt. If not you will need to order a No power repair.

Your batt. is covered under the same man. warranty as your camera.

Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

Nov 05, 2009 | Kodak EasyShare M863 Digital Camera

1 Answer

Battery problem


Remove stain from batt. location , spray it WD40 inside batt. compartment then use NiMH batt. enelop white color

Jun 17, 2009 | Canon PowerShot A570 IS Digital Camera

Not finding what you are looking for?
Kodak EasyShare V1003 Digital Camera Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Digital Cameras Experts

kakima

Level 3 Expert

96396 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Tony

Level 3 Expert

2598 Answers

Are you a Kodak Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...