Question about Jensen JER-422 Universal Remote Control

2 Answers

Teknique Jumbo Universal Remote Control Instructions

I have lost the instructions for my jumbo teknique remote control. I have a Phillips tv, Phillips dvd player and a Sagem Digital TV recorder. Does it tell you what buttons to press if it is not on the sheet?
Could you please send the codes to me,
Thanks Phil

Posted by on

  • 3 more comments 
  • maneesha1997 Dec 07, 2008

    I have lost the instructions for my jumbo teknique remote control. I have a Pacific TV. Can you please post any codes?



    Thanks

  • Anonymous Mar 05, 2009

    i need the codes for a dvb freeeview box

  • Anonymous Mar 09, 2009

    on a samsung tv

  • Anonymous Apr 06, 2009

    anyone know the code for a samsung tv?

  • ganno Apr 26, 2009

    need to tune remote to digital tv box . is this possible ?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Pacific TV - Press "SET" and Hold it, press "TV" and release it, then release "SET", then type one of these codes 0676, 0677, 0678 or 0679. After each code try powering off the TV using the remote. One should work. (I think the 2nd one worked for me).

Posted on Dec 26, 2008

  • john_carthy Dec 26, 2008

    Phillips TV - Press "SET" and Hold it, press "TV" and release it, then release "SET", then type one of these codes 0003, 0004, 0011, 0015, 0026, 0027, 0044, 0046, 0054, 0073, 0113,0115,0155, 0159, 0179, 0191, 0192, 0193, 0194, 0223, 0266, 0230, 0242, 0711, 0737, 1010,1013, 1020, 1024,1031, 1033, 1043, 1045, 1046 or 1048. After each code try powering off the TV using the remote.


    Phillips DVD - Press "SET" and Hold it, press "DVD" and release it, then release "SET", then type one of these codes 0559, 0675.



    SAGEM Codes - (TVs 0717, 0742 SAT 0805, 2028) thats all thats listed for that manufacturer.

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Need the code for a bush vhs dvd combo please anyone

Posted on Dec 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need code for my vizio tv i bought a ihip remote control for my tv


The instructions on letting the Hipi remote to seach for the code that came with my remote are not correct. I used the instructions from HOWTO.COM and printed below. There are two changes from the printed instructions. The first is to push the <TV> button after the <Code Search> button. The second is that the <Enter> button saved the code not the <MUTE> button.

Instructions
1
Turn on the Vizio TV.
2
Aim the Jumbo Universal Remote at the Vizio TV and hold down the "Code Search" button on the remove for roughly 3 to 5 seconds. The LED lights on the Jumbo Universal Remote will come on.
3
Press the "TV" button at the top of the Jumbo Universal Remote.
4
Start pressing the "ON/OFF" button repeatedly until the Vizio TV turns off. (This took only a few tries for my Vizio TV)
5
Press "Enter" on the remote immediately after the Vizio TV turns off to save the code.
6
Test the Jumbo Universal Remote by trying to control the Vizio TV with the remote. If the control doesn't work with the remote, repeat the entire process.

Nov 15, 2011 | Vizio VA26L 26 in. LCD HDTV

1 Answer

Programming


i need codes to jumbo sharper image universal remote

Jan 27, 2009 | One For All URC-9910 LCD Remote Control

4 Answers

Lost guide book for emerson jumbo universal remote. need code


My guess is that it's the same as the Shaper Image Jumbo remote. Go to http://mscustomercare.com/. There's pictures of both. I just downloaded free instructions, will try them myself tomorrow.

Jan 09, 2009 | Televison & Video

2 Answers

Teknique Universal Jumbo Remote Freeview Codes


Hey there,

I don't know for sure, but this might help. I asked a question myself then managed to find my own instruction sheet. My question was about the 'auto find' function where the remote tries all codes until you find one that works and store it. Hope it helps!

==
This is it's instructions in case they help anyone else. By the way where it says 'a second or even a third time' be prepeared for many more attempts than 3!!

==
First power on the equipment to be controlled. Press the SET button and don't release, then press the equipment control button (such as tv / vcr etc). The red light will be on. Release the SET button then press the SET button again, the red light will be flashing. Press the POWER button, the remote controller will transmit a signal to power off the equipment. If the equipment cannot be powered off for the first operation, try a second or even third time until the equipment is powered off. When the equipment is powered off, the code will correspond with the equipment. Press the button for the equipment (such as TV) to save the setting.

Jan 02, 2009 | Jensen JER-422 Universal Remote Control

2 Answers

I need instructions for a jumbo universal remote


im going to tell you automatic searching to operate your tv.... turn the tv on..
push the tv button and the on off switch at same time and watch if the led is steady ,leave the buttons., push play button and wait 5 seconds til the led finishes flashing you have to do this about 20 times to be complete secure your remote control doesnt control your tv....but if the control found the code the tv turn it off push reverse button and leave it and wait two seconds to turn the tv on and that set push stop. ........test all functions on your remote control to the tv.....saludos.

Nov 15, 2008 | Universal Remote Control Remote Control

1 Answer

JUMBO UNIVERSAL REMOTE CONTROL


Hi,
I am giving the site where there is a manual for setting up your jumbo universal remote control.

enablingdevices.com/files/downloads/401fe4d1-1d9e-4186-8d75-4ea2f4754513.pdf

Hope my info solve your problem,
Thanx for using Fixya,
Bye.

Sep 26, 2008 | Performance Teknique Televison & Video

2 Answers

Teknique jumbo remote


where are the codes? hold set then press tv etc then enter code. I need the codes please

Jul 22, 2008 | Jensen JER-422 Universal Remote Control

2 Answers

Teknique remote control


i have the instruction but can scan the basics but pages of codes. let me know what brand you need.

Mar 20, 2008 | Jensen JER-422 Universal Remote Control

1 Answer

Teknique Jumbo Remote Control


Hypnojohn. Please send me your email address. I will scan the instructions for you

Feb 25, 2008 | Jensen JER-422 Universal Remote Control

Not finding what you are looking for?
Televison & Video Logo

2,020 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jensen Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Cindy Wells

Level 3 Expert

4951 Answers

Are you a Jensen Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...