Question about Washing Machines

1 Answer

I have a Kenmore washer about 12 years old. The agitator seems to be slipping...doesn't move very much and stir up the clothes. What could be the problem?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

You need to purchase agitator dogs and install them in between the two parts of the agitator. They just pull apart. Turn the top part upside down and look down in there. You will see some small, fish shaped plastic things, remove them. & replace with new.

Posted on Jul 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Agitator seems to slip and not constantly move during wash cycle


no it is not suppose to slip it sounds like the agitator dogs need replacing it is quiet easy to repair and not expensive it only cost me $8 and took twenty minutes to do when I replaced the ones on my washer

Dec 28, 2013 | Kenmore 3.2 cu. ft. Plus Top Load Washer

1 Answer

Kenmore Washer Doesn't Agitate


Don't be too sure the drive coupler hasn't failed or is failing

Jun 15, 2013 | Kenmore 24032\24036 Top Load Washer

1 Answer

My 4 year old roper washer leaves grease on clothes. On spin cycle the machine makes a screaching noise, and the clothes don't spin dry.


Possible that the belt is slipping and also there is some issue with the agitator as the gaps within seems to bring up the dirt or grease mix to the clothes.
So it is important to remove the panel and check the play on the belt, replace if the play is high and check if the agitator bearings are worn out. If so the agitator assembly must be taken out and checked.

Dec 09, 2011 | Washing Machines

3 Answers

My kenmore 800 washer is off cycle for example when i start a load of clothes it starts agitating before filling, and doesn't always spin all the water out of the clothes


I have the exact same problem with my Kenmore 800 top loader, Model # 110.29822800. It is only 1.5 years old. Any suggestions?

Jan 19, 2011 | Kenmore 22422 Top Load Washer

1 Answer

Doesn't agitate and spin cycle work when reset


you have a worn motor coupler
you can order a new one at sears
and its a ver y easy repair

Oct 06, 2009 | Kenmore 3.2 cu. ft. Plus Top Load Washer

1 Answer

Clothing stuck under the agitator


Hold the agitator steady and the very top end will screw off. If very old it will be stuck pretty tight, but do not break it. Then the agitator will lift straight up.

Aug 08, 2009 | Kenmore Washing Machines

1 Answer

Agitator on my washer is loose


Replace the agitator dogs in the top part of the agitator. Parts are about $7.00.

Jul 17, 2009 | Kenmore Washing Machines

1 Answer

Kenmore 80 series agitator problem


time to look for a new washer, this is a gearcase problem, or cluth. Not easy to fix , unless know how.

Nov 08, 2008 | Washing Machines

1 Answer

Kenmore 70 series washer


the agitator dogs are problably remove agitator cap remove bolt holding agitator in ..dogs are part #80040

Jul 19, 2008 | Kenmore 22422 Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...