a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
In order to use your phone Sony Ericson P1i as the modem, you have to install the Sony Ericson PC suit in your laptop using the Sony Ericson CD. It works i used it, you can either start use by Connecting with cabe or Ad-hoc bloetooth pan
Laptop normally have single chip WiFi or Wireless Cards...
These cards could be used as client(connecting to wireless router), adhoc or access point(a WiFi card could be used as Access Point to route your LAN(Wired) connection on WLAN)...
Your laptop WiFi card is already busy as a Cleint, so if you want to use it as AdHoc, you have to remove all the other connection with the WIreless...ie, Disconnect the WLAN from connecting other devices, and follow the below mentioed steps to connect your device..
When you are using Client mode you are not able to use it on Ad-hoc or Access Point feature...
Setup laptop to Ad-Hoc
1)Navigate to control panel and choose network connection, Right click on the Wireless network connection and click on the Properties on Wireless NIC 2) Click-Wireless Networks Tab 3) Click-Add 4) Provide SSID Name, name to identify you rnetwork 5)Security -Net Auth: Open 6)Make -Data Encryption: Disabled 7) In the check box present-Check on This is a Computer to Computer (ad-hoc) network.
Change the IP address of the Wireless NIC card, by choosing TCp IP in the properties of WLAN and choosing TCP/IP v4 from the installed service
TCP/IP on Laptop -IP: 10.0.0.1 -Subnet: 255.255.255.0
TCP/IP on iPhone -Static IP -IP: 10.0.0.2 -Subnet: 255.255.255.0
Now try searching for Wireless through your phone, you should able to connect..
Please leave me comment, if you need further assistance
for windows xp you man set up the connection via cable or bluetooth and ms active sync - the htc (windows mobile) is able to use the hosts network connection. you may also set up an ad-hoc wlan on you eee and turn on internet connection sharing for your mobile broadband connection. if you connect your eee to the ad-hoc wlan it should be able to access the internet
Had the same problem but some how fixed it. WLANconnected blue ball displayed but the page didn't open.. well this is what i did and it worked... I went to my router and opened the section for wireless access point or the access control. I dint turn on the access control mine is still an open network but the was a list displaying available access cards connected to the router..in that my laptop and my P1i showed and i added them to the access control list( even though i didn't check the box to turn access control..wiered) but it worked and im browsing.. now when i check the connected devices ..it shows the P1i tooo.. soo the fix is in the router...none other solutions abt router worked except this one AND i use operamini and not the default browser.. .. am I A GENIUS?
for this time i want to tell you that i am not very familiar with the P1 wifi, however as my experience on the some wifi connection i only read the usermanual manual of the unit connecting to the internet.
please show me a picture and the model of the wifi so that i can figure out your problems.
PS: pls donot rate me if the solution donot solve the issue.