My D-Link DIR-615 wireless n router has a gateway of 192.168.0.1. I type this into the URL, and it won't work. I can access this router from every other computer on my network by doing this. It isn't the wireless card, because I've tried doing it with multiple wireless cards. I also cannot access files from other computers. My operating system is Windows XP Media Center. I've already tried turning the firewall off. The internet on my computer works fine. I can change the IP address of the wireless card on this computer, so apparently the router sees the computer fine.
I can't access the 192.168.1.1 URL
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Make sure that the broadcast SSID in your router is enabled. Try setting it up again and make sure all necessary settings are set, or it might be the settings in your computer itself, let me know what type of computer you are currently using so i can check.
Try 192.168.1.1-it has to be whatever your default gateway is. You have to enter your DEFAULT GATEWAY-and that may not be it--go to START>RUN and type "CMD" in the box-- at the command prompt type "MSCONFIG" and you will see your DEFAULT GATEWAY
If this was helpful, please indicate so, if not -comment back so we can dig further to resolve this.
For that Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.0.1 or http://192.168.1.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router.
Click on wireless settings disable wireless WEP Security .Then save settings and restart router. Let me know if you need further assistance. Thanks for using FixYa
If your computer is connected to your dlink network you should be able to access.check the ip address on the computer.if correct ip address optimized browser by deleting cookies and temp files.Also try downloading firefox